SLVUCV6 May   2024 TPSM81033

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Input/Output Connector Descriptions
      2. 2.1.2 Modification
      3. 2.1.3 Input Capacitor
      4. 2.1.4 Output Capacitor
      5. 2.1.5 Feedforward Capacitor
  8. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials
  9. 4Additional Information
    1. 4.1 Trademarks

2.1.1 Input/Output Connector Descriptions

Reference DesignatorDescription
J1-VINPositive input connection from the input supply for the EVM.
J2-VOUTPositive connection for the output voltage.
J3-GNDReturn connection for the input voltage.
J4-GNDReturn connection for the output voltage.
TP1-VIN, TP4-GNDInput voltage sensing for measuring efficiency. PVIN_S+ is for positive input and PVIN_S- is for negative input.
TP2-VOUT, TP5-GNDOutput voltage sensing for measuring efficiency. VOUT_S+ is for output positive node and VOUT_S- is for output negative node.
J5-PGTest point to measure PG pin waveform.
JP1-MODEMODE pin input jumper.
JP2-ENEN pin input jumper. Place a jumper across EN and AVIN to turn on the IC. Place a jumper across EN and GND to turn off the IC.
TP3-AUXTest point to measure AUX pin voltage.