SLVUCW8 October   2024 TPSM82916

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Cautions and Warnings
  7. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Input and Output Connector Descriptions
  8. 3Implementation Results
    1. 3.1 Test Results
    2. 3.2 Ripple Measurement Setup
    3. 3.3 Modifications
      1. 3.3.1 Input and Output Capacitors
      2. 3.3.2 Configurable Enable Threshold Voltage
      3. 3.3.3 NR/SS Capacitor
      4. 3.3.4 Feedforward Capacitor
      5. 3.3.5 S-CONF Resistor
      6. 3.3.6 Loop Response Measurement
      7. 3.3.7 Single LC Filter Operation
    4. 3.4 Performance Specification
  9. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  10. 5Additional Information
    1. 5.1 Trademarks

4.2 PCB Layout

This section provides the EVM board layout and illustrations in Figure 4-2 through Figure 4-6. The Gerber files are available on the TPSM82916EVM product page.

TPSM82916EVM Top AssemblyFigure 4-2 Top Assembly
TPSM82916EVM Internal Layer 1 Figure 4-4 Internal Layer 1
TPSM82916EVM Bottom Layer (Mirrored)Figure 4-6 Bottom Layer (Mirrored)
TPSM82916EVM Top LayerFigure 4-3 Top Layer
TPSM82916EVM Internal Layer 2Figure 4-5 Internal Layer 2