Register Settings

Register Address	Register Name	Setting	Description
0xD1	GENERAL_CONFIG	0x01E0	[15:14] 0b00: Always write 0b00
			[13] 0b0: Write 0b1 to lock the device. Unlock by writing 0b0101 to DEVICE_UNLOCK_CODE field in the PROTECT register
			[12:5] 0x0F: Always write 0x0F
			[4:3] 0b00: Powers up the device output
			[2] 0b0: Disables the internal reference
			[1:0] 0b00: Sets the reference to VOUT gain 1.5×
0xD3	PROTECT	0x0010	[15:12] 0b0000: Write 0b0101 to unlock the device
			[11:10] 0b00: Don't care
			[9] 0b0: Write 0b1 to load all registers with factory reset values
			[8:6] 0b000: Always write 0b000
			[5] 0b0: Write 0b1 to reload applicable registers with existing NVM settings
			[4] 0b1: Write 0b1 to store applicable register settings to the NVM
			[3:0] 0b0000: Write 0b1010 to reset registers with existing NVM settings or default settings
0x21	DPOT_POSITION	0x0660	[15:12] 0b0000: Don't care
			[11:4] 0x66: 8-bit data updates the digipot output
			[3:0] 0b0000: Don't care