SNAU198A May   2016  – May 2016 TDC7201

 

  1.   TDC7201-ZAX-EVM
    1.     Trademarks
    2. 1 General Description
      1. 1.1 TDC7201EVM Key Features
      2. 1.2 TDC7201EVM
    3. 2 Equipment List
    4. 3 Quick Start
    5. 4 Software Installation
      1. 4.1 Installing the TDC720xEVM GUI
      2. 4.2 MSP430 Firmware Upgrade (This is only needed for a new Launchpad.)
      3. 4.3 Checking Connection
      4. 4.4 Opening the GUI
    6. 5 Hardware Configuration
      1. 5.1 TDC7201EVM Connections
      2. 5.2 Jumpers
    7. 6 GUI and Operation
    8. 7 Board Layout
    9. 8 TDC7201EVM Schematic
    10. 9 Bill of Materials
  2.   Revision History

4.3 Checking Connection

  1. If you haven’t done so, connect the USB cable from the MSP430 Launch Pad to your PC.
  2. If you haven’t done so, connect the TDC7201EVM to the MSP430 Launch Pad via J1 and J2 as shown in Figure 6.
  3. Open the computer’s Device Manager . To do this, right-click My Computer, click Properties, and select Device Manager.
  4. Scroll down to Ports (COM & LPT) and check TDC7200EVM (COMx) connection as shown in Figure 3.
    5. device_manager.pngFigure 3. Device Manager