SNAU264 July   2021 CDCDB800

 

  1. 1 Trademarks
  2. 2 General Description
    1. 2.1 Features
  3. 3 Quick Setup
    1. 3.1 Setup Procedure
  4. 4 Signal Path and Control Switches
  5. 5 Power Supplies
  6. 6 Clock Inputs
    1. 6.1 Configuring Board for CDCDB803
  7. 7 Clock Outputs
  8. 8 Using SMBus
    1. 8.1 CDCDB803 SMBus Address
  9. 9 Schematics
  10. 10Bill of Materials

8 Using SMBus

The user can program the CDCDB800 or CDCDB803 through TI software – TICSPRO available for download on ti.com.

Go to the TICS Pro toolbar and click Select Device → Clock Distribution with Divider → CDCDB800. Navigate to the Main tab and click Scan SMBus. The device should be found at '0xD8'.

With SMBus, control of the outputs is possible with the associated DIP switch OEx# turned OFF. See the datasheet for implementation.