SNIU051 March   2023

 

  1.   Abstract
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Features
    2. 1.2 EVM Kit Contents
  4. 2TMP4718EVM Hardware Overview and Setup
    1. 2.1 Board Connectors and Components
      1. 2.1.1 Programming Header
      2. 2.1.2 Pushbutton Switch
      3. 2.1.3 Status LEDs
      4. 2.1.4 Remote BJT
    2. 2.2 EVM Operating Conditions
  5. 3TMP4718EVM Software Overview
    1. 3.1 Software Download
      1. 3.1.1 Live Software on dev.ti.com
      2. 3.1.2 Offline Software
    2. 3.2 Software Operation
      1. 3.2.1 Home Tab
      2. 3.2.2 Data Capture Tab
      3. 3.2.3 Registers Tab
      4. 3.2.4 Collateral Tab
  6. 4Schematic, Board Layout, and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 Layout
    3. 4.3 Bill of Materials

2.1.2 Pushbutton Switch

The Switch SW1 allows the device to enter USB BSL mode for firmware updates. To enter BSL mode, connect the EVM to a USB port while holding down Switch SW1.