SNLA445 November   2023 LMK6H

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Test Setup
  6. 3Test Procedure
  7. 4Explanation of TI's PCIe Compliance Tool
  8. 5LMK6H Test Results
    1. 5.1 LMK6H Test Results Summary
    2. 5.2 PCIe Tool Input File Waveforms for the LMK6H
    3. 5.3 LMK6H Detailed Jitter Measurements
  9. 6Summary
  10. 7References

LMK6H Test Results Summary

Table 5-1 is the PCIe compliance results summary for the LMK6H phase noise analysis, which demonstrates the jitter compliance of the device for PCIe Gen 1 through 6, noise folds 0 and 3, and Common Clock (CC) and Separate Reference No Spread (SRNS) clock architectures.

A PCIe jitter spec or time domain calculation can have one of the following statuses:

  • PASS: within specifications/limits
  • FAIL: outside specifications/limits
  • N/A: no specifications/limits available
Table 5-1 LMK6H PCIe Tool Test Results Summary - Frequency Domain
Jitter FilterClock Arch.Noise FoldMin (fs)Max (fs)Limit (fs)Status
PCIe1CC00.01,38486,000PASS
30.01,82686,000PASS
PCIe2CC0481523,100PASS
3631993,100PASS
SRNS059157N/AN/A
379207N/AN/A
PCIe3CC016461,000PASS
321601,000PASS
SRNS01850N/AN/A
32465N/AN/A
PCIe4CC01646500.0PASS
32160500.0PASS
SRNS01850N/AN/A
32465N/AN/A
PCIe5CC0420150.0PASS
3525150.0PASS
SRNS0420N/AN/A
3527N/AN/A
PCIe6CC0412100.0PASS
3515100.0PASS
SRNS0515N/AN/A
3719N/AN/A

Table 5-2 is the PCIe compliance summary for the LMK6H time domain analysis which demonstrates the time domain compliance of the device.

Table 5-2 LMK6H PCIe Tool Test Results Summary - Time Domain
CalculationMinAvgMaxLimitStatus
Vcross398.77

403.0

406.87250 mV to 550 mVPASS
Vhigh684.703684.703150 mVPASS
Vlow-80.0-80.0-150 mVPASS
Period9.99410.010.0129.847 ns to 10.203 nsPASS
Duty Cycle50.27950.377

50.459

40% to 60%PASS
Overshoot Voltage20.79

27.36

300 mVPASS
Undershoot Voltage-19.66-28.08-300 mVPASS
Rising Edge Rate3.028

3.164

3.374

0.6 V/ns to 4 V/nsPASS
Falling Edge Rate2.369

2.536

2.703

0.6 V/ns to 4 V/nsPASS