SNLU226B February   2018  – April 2021 DS90UB960-Q1

1. 1 Introduction
2. 2 Features
3. 3 Application Diagram
4. 4 Major Components
5. 5 Quick Start Guide
6. 6 Board Connections
   1. 6.1 Power Supply
   2. 6.2 Power Over Coax Interface
   3. 6.3 MIPI CSI-2 Output Signals
   4. 6.4 FPD-Link III Signals
   5. 6.5 I2C Interface
   6. 6.6 Control Interface
7. 7 Enable and Reset
8. 8 ALP Software Setup
   1. 8.1  System Requirements
   2. 8.2  Download Contents
   3. 8.3  Installation of the ALP Software
   4. 8.4  Startup - Software Description
   5. 8.5  Information Tab
   6. 8.6  Registers Tab
   7. 8.7  Registers Tab - Address 0x00 Selected
   8. 8.8  Registers Tab - Address 0x00 Expanded
   9. 8.9  Scripting Tab
   10. 8.10 Sample ALP Python Script
       1. 8.10.1 Initialization
9. 9 Troubleshooting ALP Software
   1. 9.1 ALP Loads the Incorrect Profile
   2. 9.2 ALP does not detect the EVM
10. 10Typical Connection and Test Equipment
11. 11Termination Device
12. 12Typical Test Setup
13. 13Equipment References
14. 14Cable References
15. 15Bill of Materials
16. 16PCB Schematics
17. 17Board Layout
18. 18Revision History