SNLU342 December   2023 MCT8315Z

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Quick Startup Guide
    2. 2.2 Hardware Setup
    3. 2.3 Hardware Connections Overview
    4. 2.4 Connection Details
    5. 2.5 MSP430FR2355 Microcontroller
    6. 2.6 LED Lights
    7. 2.7 User-Configurable Settings
      1. 2.7.1 Hardware Variant Resistor Settings
      2. 2.7.2 SPI Variant Resistor Settings
  9. 3Software
    1. 3.1 Firmware and GUI Application
    2. 3.2 MCT8315Z GUI
    3. 3.3 Running the GUI
    4. 3.4 Downloading Code Composer Studio and Importing GUI Firmware
    5. 3.5 Using the eZ-FET to Program the MSP430FR2355
  10. 4Hardware Design Files
    1. 4.1 Schematics
      1. 4.1.1 MCT8315Z 3-Phase Sensored Trapezoidal Motor Driver
      2. 4.1.2 Power Supplies
      3. 4.1.3 MCU Interface
      4. 4.1.4 User Interface
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1.     Trademarks

3.4 Downloading Code Composer Studio and Importing GUI Firmware

  1. Download and extract the MCT8315ZEVM firmware to a location on the computer.
  2. Download the latest version of Code Composer Studio. This sets up a folder at the directory C:\ti.
    1. Accept all agreements, default install locations, and select Next to proceed through menus.
    2. In the Select Components window, make sure to check MSP430 Low-Power MCUs to install the required packages for the MSP430 LaunchPad Evaluation Kits.
  3. After installing, run CCS and select a folder or the default to use as the workspace to store any new projects. The location and naming convention can be changed based on the user's preference. Click the OK button to accept.
  4. In CCS, click on the Project tab and select Import CCS Projects. Click on Browse. Select the folder created in step 1 by extracting the MCT8315Z firmware.
  5. Import the project into the workspace as shown in Figure 4-3.
GUID-20231201-SS0I-Z2V8-KHDK-V5HML8DZPFNR-low.png Figure 3-3 MSP430FR2355 Interface Firmware Code in Code Composer Studio