SNOU181B February   2021  – April 2022 LDC3114 , LDC3114-Q1

 

  1.   Trademarks
  2. 1Overview
    1. 1.1 EVM Kit Contents
    2. 1.2 Compatible Sensors
    3. 1.3 Main EVM Elements
  3. 2EVM GUI
    1. 2.1 System Requirements
    2. 2.2 Installation
    3. 2.3 Navigation
      1. 2.3.1 Registers
        1. 2.3.1.1 Basic Register Configuration
      2. 2.3.2 Data Plot
      3. 2.3.3 Collateral
    4. 2.4 Firmware Updates
    5. 2.5 Direct EVM Communication
  4. 3Schematic
  5. 4Layout
  6. 5Bill of Materials
  7. 6Revision History

2.3.1 Registers

The Registers page allows the user to read and write to the device registers. Additionally, the Auto Read function will default to Off, but can be set to the following speeds:

  • Every 1 sec
  • Every 5 sec
  • Every 10 sec
  • Every 20 sec
  • Every 30 sec
  • Every 60 sec
  • As fast as possible

The data registers have been combined onto a single line in the GUI for ease of use, but they are still separate 8-bit registers in the device. The firmware on the EVM reads the needed registers for a given channel and combines them in the proper order before reporting the data to the GUI.

GUID-D094727D-3AB9-4BC9-874D-1EA6F7BD7298-low.png Figure 2-3 Registers Page.