SNOU181B February   2021  – April 2022 LDC3114 , LDC3114-Q1

 

  1.   Trademarks
  2. 1Overview
    1. 1.1 EVM Kit Contents
    2. 1.2 Compatible Sensors
    3. 1.3 Main EVM Elements
  3. 2EVM GUI
    1. 2.1 System Requirements
    2. 2.2 Installation
    3. 2.3 Navigation
      1. 2.3.1 Registers
        1. 2.3.1.1 Basic Register Configuration
      2. 2.3.2 Data Plot
      3. 2.3.3 Collateral
    4. 2.4 Firmware Updates
    5. 2.5 Direct EVM Communication
  4. 3Schematic
  5. 4Layout
  6. 5Bill of Materials
  7. 6Revision History

1 Overview

The BOOST-LDC3114EVM demonstrates the use of inductive sensing technology to sense and measure the presence or position of a conductive target object and to detect the press of an inductive touch button. The LDC3114 in the EVM is controlled by a MSP432 on the mother board, which connects to a host computer.

The EVM is comprised of two boards, the BOOST-LDC3114 board and the PAMB (Precision Amps Mother Board). This is set up as a boosterpack and allows the LDC board to easily be used with a different microcontroller.

GUID-DBE83185-AEC4-405B-A1AF-B111607BE3BF-low.pngFigure 1-1 BOOST-LDC3114EVM.