SNOU198 October   2023 TLV3802

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Recommended Equipment Setup
    2. 2.2 Board Setup
      1. 2.2.1 Power Supplies
      2. 2.2.2 Inputs
      3. 2.2.3 Outputs
      4. 2.2.4 Hysteresis
    3. 2.3 Quick-Start Procedure
  7. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1.     Trademarks

1.3 Specification

GUID-20230830-SS0I-KGGQ-NRVD-NT3F9V41RMGR-low.svg Figure 1-1 TLV3802EVM Block Diagram
  • Supply range: +2.7 V to +5.25 V (single supply only)
  • Input common mode voltage range: (VEE + 1.5 V) to (VCC + 0.1 V)
Table 1-1 TLV3802EVM SMA and Test Point to DUT Pin Mapping
TLV3607EVM CONNECTIONS
Test point 1 GND (Pin 1)

SMA J2: IN1+

SMA J1: IN1+_SENSE

 IN1+ (Pin 2)

SMA J5: IN1-

SMA J6: IN1-_SENSE

 IN1- (Pin 3)

Test Point 2

 VEE (Pin 4)

SMA J8: IN2+

SMA J7: IN2+_SENSE

 IN2+ (Pin 5)

SMA J11: IN2-

SMA J12: IN2-_SENSE

 IN2- (Pin 6)
Test point 3 VCC (Pin 7)
SMA J10: OUT2- OUT2- (Pin 8)
SMA J9: OUT2+ OUT2+ (Pin 9)
Test Point 3 VCC (Pin 10)
SMA J4: OUT1- OUT1- (Pin 11)
SMA J3: OUT1+ OUT1+(Pin 12)