SNVK004A November   2020  – July 2022 TPS7H4010-SEP

 

  1.   TPS7H4010-SEP Production Flow and Reliability Report
  2.   Trademarks
  3. 1Texas Instruments Enhanced Product Qualification and Reliability Report
  4. 2Space Enhanced Plastic and Known Good Die (KGD) Production Flows
    1. 2.1 Device Introduction
    2. 2.2 TPS7H4010-SEP Space Enhanced Plastic Production Flow
    3. 2.3 TPS7H4010-SEP Space Enhanced KGD Production Flow
  5. 3Device Qualification
  6. 4Outgas Test Report
  7. 5Revision History

4 Outgas Test Report

Outgassing test was performed on 5 units. A total mass loss (TML) of 1.00% and collected volatile condensable material (CVCM) of 0.10% were used as screening levels for rejection of spacecraft materials. The outgas test was performed in a vacuum environment of less than 5 × 10 –5 torr according to ASTM E 595, for a duration of 24 hours, at 125°C. The TML and CVCM were measured after the test.

Table 4-1 Outgas Test Results
SAMPLE TML
< 1.0%		 CVCM
< 0.1%
TPS7H4010MRNPTSEP PASS PASS