SNVU755A January   2021  – June 2021 TLV841

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Related Documentation
    2. 1.2 TLV841 Applications
  3. 2Schematic, Bill of Materials, and Layout
    1. 2.1 TLV841EVM Schematic
    2. 2.2 TLV841EVM Bill of Materials
    3. 2.3 Layout and Component Placement
    4. 2.4 Layout
  4. 3EVM Connectors
    1. 3.1 EVM Test Points
    2. 3.2 EVM Jumpers
  5. 4EVM Setup and Operation
    1. 4.1 Input Power (VDD)
    2. 4.2 Monitoring Voltage on SENSE Pin (TLV841S)
    3. 4.3 Monitoring Voltage on VDD (TLV841M and TLV841C)
    4. 4.4 Manual Reset (MR) (TLV841M)
    5. 4.5 Reset Output (RESET)
    6. 4.6 Reset Time Delay Programming (Program tD via CT) (TLV841C)
  6. 5Revision History

2.3 Layout and Component Placement

Figure 2-2 and Figure 2-3 show the top and bottom assemblies of the printed circuit board (PCB) to show the component placement on the EVM.

Figure 2-4 and Figure 2-5 show the top and bottom layouts, Figure 2-6 and Figure 2-7 show the top and bottom layers, and Figure 2-8 shows the top solder mask of the EVM.