SNVU769A September   2021  – October 2022

 

  1.   Abstract
  2.   Trademarks
  3. 1Top View with Basic External Connections
  4. 2Input, Output Voltages, and Load Current Requirements
  5. 3Jumpers and connectors
    1. 3.1 Test Points
  6. 4Getting Started
    1. 4.1 GUI
    2. 4.2 GUI Installation and working with GUI
  7. 5Watchdog
  8. 6Schematics, Layout and BOM
    1. 6.1 Schematic Diagram
    2. 6.2 PCB Layer Diagram
    3. 6.3 Components List
  9. 7Revision History

3.1 Test Points

Table 3-3 lists all the available connectors on the EVM.

Table 3-3 Test Points on the EVM
Connector Number Connector Name Description
J11 PVIN3V3_S Test point to measure the input voltage of the PMIC
J19 Load Module Connector Connector placeholder for PMICLOADBOARDEVM for doing load transient testing
J20 Load Module Connector Connector placeholder for PMICLOADBOARDEVM for doing load transient testing
J21 FB_B1 Test point to measure the BUCK1 feedback signal
J22 FB_B2 Test point to measure the BUCK2 feedback signal
J23 FB_B3 Test point to measure the BUCK3 feedback signal
J27 J27 SMA connector for BUCK3 noise measurement
J28 J28 SMA connector for BUCK2 noise measurement
J29 J29 SMA connector for BUCK1 noise measurement
J31 USB_5V_S Test point to measure 5 V supply from USB cable