SNVU859 June   2024 LP5813

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3.     Glossary
    4.     Related Documentation
    5.     Support Resources
    6.     Trademarks
  3. 1Introduction/Feature Overview
    1. 1.1 Overview
  4. 2 Register Maps
    1. 2.1  Register Map Table
    2. 2.2  Device_Enable Registers
    3. 2.3  Config Registers
    4. 2.4  Command Registers
    5. 2.5  LED_Enable Registers
    6. 2.6  Fault_Clear Registers
    7. 2.7  Reset Registers
    8. 2.8  Manual_DC Registers
    9. 2.9  Manual_PWM Registers
    10. 2.10 Autonomous_DC Registers
    11. 2.11 LED_0_Autonomous_Animation Registers
    12. 2.12 LED_1_Autonomous_Animation Registers
    13. 2.13 LED_2_Autonomous_Animation Registers
    14. 2.14 LED_3_Autonomous_Animation Registers
    15. 2.15 LED_A0_Autonomous_Animation Registers
    16. 2.16 LED_A1_Autonomous_Animation Registers
    17. 2.17 LED_A2_Autonomous_Animation Registers
    18. 2.18 LED_B0_Autonomous_Animation Registers
    19. 2.19 LED_B1_Autonomous_Animation Registers
    20. 2.20 LED_B2_Autonomous_Animation Registers
    21. 2.21 LED_C0_Autonomous_Animation Registers
    22. 2.22 LED_C1_Autonomous_Animation Registers
    23. 2.23 LED_C2_Autonomous_Animation Registers
    24. 2.24 LED_D0_Autonomous_Animation Registers
    25. 2.25 LED_D1_Autonomous_Animation Registers
    26. 2.26 LED_D2_Autonomous_Animation Registers
    27. 2.27 Flag Registers
  5.   Revision History

2.8 Manual_DC Registers

Table 2-31 lists the memory-mapped registers for the Manual_DC registers. All register offset addresses not listed in Table 2-31 should be considered as reserved locations and the register contents should not be modified.

Table 2-31 MANUAL_DC Registers
AddressAcronymRegister NameSection
30hManual_DC_0LED_0 current setting in manual modeGo
31hManual_DC_1LED_1 current setting in manual modeGo
32hManual_DC_2LED_2 current setting in manual modeGo
33hManual_DC_3LED_3 current setting in manual modeGo
34hManual_DC_4LED_A0 current setting in manual modeGo
35hManual_DC_5LED_A1 current setting in manual modeGo
36hManual_DC_6LED_A2 current setting in manual modeGo
37hManual_DC_7LED_B0 current setting in manual modeGo
38hManual_DC_8LED_B1 current setting in manual modeGo
39hManual_DC_9LED_B2 current setting in manual modeGo
3AhManual_DC_10LED_C0 current setting in manual modeGo
3BhManual_DC_11LED_C1 current setting in manual modeGo
3ChManual_DC_12LED_C2 current setting in manual modeGo
3DhManual_DC_13LED_D0 current setting in manual modeGo
3EhManual_DC_14LED_D1 current setting in manual modeGo
3FhManual_DC_15LED_D2 current setting in manual modeGo

2.8.1 Manual_DC_0 Register (Address = 30h) [Reset = 00h]

Manual_DC_0 is shown in Figure 2-24 and described in Table 2-32.

Return to the Summary Table.

Figure 2-24 Manual_DC_0 Register
76543210
manual_dc_0
R/W-0h
Table 2-32 Manual_DC_0 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_0R/W0h LED_0 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.2 Manual_DC_1 Register (Address = 31h) [Reset = 00h]

Manual_DC_1 is shown in Figure 2-25 and described in Table 2-33.

Return to the Summary Table.

Figure 2-25 Manual_DC_1 Register
76543210
manual_dc_1
R/W-0h
Table 2-33 Manual_DC_1 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_1R/W0h LED_1 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.3 Manual_DC_2 Register (Address = 32h) [Reset = 00h]

Manual_DC_2 is shown in Figure 2-26 and described in Table 2-34.

Return to the Summary Table.

Figure 2-26 Manual_DC_2 Register
76543210
manual_dc_2
R/W-0h
Table 2-34 Manual_DC_2 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_2R/W0h LED_2 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.4 Manual_DC_3 Register (Address = 33h) [Reset = 00h]

Manual_DC_3 is shown in Figure 2-27 and described in Table 2-35.

Return to the Summary Table.

Figure 2-27 Manual_DC_3 Register
76543210
manual_dc_3
R/W-0h
Table 2-35 Manual_DC_3 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_3R/W0h LED_3 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.5 Manual_DC_4 Register (Address = 34h) [Reset = 00h]

Manual_DC_4 is shown in Figure 2-28 and described in Table 2-36.

Return to the Summary Table.

Figure 2-28 Manual_DC_4 Register
76543210
manual_dc_a0
R/W-0h
Table 2-36 Manual_DC_4 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_a0R/W0h LED_A0 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.6 Manual_DC_5 Register (Address = 35h) [Reset = 00h]

Manual_DC_5 is shown in Figure 2-29 and described in Table 2-37.

Return to the Summary Table.

Figure 2-29 Manual_DC_5 Register
76543210
manual_dc_a1
R/W-0h
Table 2-37 Manual_DC_5 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_a1R/W0h LED_A1 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.7 Manual_DC_6 Register (Address = 36h) [Reset = 00h]

Manual_DC_6 is shown in Figure 2-30 and described in Table 2-38.

Return to the Summary Table.

Figure 2-30 Manual_DC_6 Register
76543210
manual_dc_a2
R/W-0h
Table 2-38 Manual_DC_6 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_a2R/W0h LED_A2 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.8 Manual_DC_7 Register (Address = 37h) [Reset = 00h]

Manual_DC_7 is shown in Figure 2-31 and described in Table 2-39.

Return to the Summary Table.

Figure 2-31 Manual_DC_7 Register
76543210
manual_dc_b0
R/W-0h
Table 2-39 Manual_DC_7 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_b0R/W0h LED_B0 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.9 Manual_DC_8 Register (Address = 38h) [Reset = 00h]

Manual_DC_8 is shown in Figure 2-32 and described in Table 2-40.

Return to the Summary Table.

Figure 2-32 Manual_DC_8 Register
76543210
manual_dc_b1
R/W-0h
Table 2-40 Manual_DC_8 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_b1R/W0h LED_B1 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.10 Manual_DC_9 Register (Address = 39h) [Reset = 00h]

Manual_DC_9 is shown in Figure 2-33 and described in Table 2-41.

Return to the Summary Table.

Figure 2-33 Manual_DC_9 Register
76543210
manual_dc_b2
R/W-0h
Table 2-41 Manual_DC_9 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_b2R/W0h LED_B2 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.11 Manual_DC_10 Register (Address = 3Ah) [Reset = 00h]

Manual_DC_10 is shown in Figure 2-34 and described in Table 2-42.

Return to the Summary Table.

Figure 2-34 Manual_DC_10 Register
76543210
manual_dc_c0
R/W-0h
Table 2-42 Manual_DC_10 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_c0R/W0h LED_C0 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.12 Manual_DC_11 Register (Address = 3Bh) [Reset = 00h]

Manual_DC_11 is shown in Figure 2-35 and described in Table 2-43.

Return to the Summary Table.

Figure 2-35 Manual_DC_11 Register
76543210
manual_dc_c1
R/W-0h
Table 2-43 Manual_DC_11 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_c1R/W0h LED_C1 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.13 Manual_DC_12 Register (Address = 3Ch) [Reset = 00h]

Manual_DC_12 is shown in Figure 2-36 and described in Table 2-44.

Return to the Summary Table.

Figure 2-36 Manual_DC_12 Register
76543210
manual_dc_c2
R/W-0h
Table 2-44 Manual_DC_12 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_c2R/W0h LED_C2 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.14 Manual_DC_13 Register (Address = 3Dh) [Reset = 00h]

Manual_DC_13 is shown in Figure 2-37 and described in Table 2-45.

Return to the Summary Table.

Figure 2-37 Manual_DC_13 Register
76543210
manual_dc_d0
R/W-0h
Table 2-45 Manual_DC_13 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_d0R/W0h LED_D0 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.15 Manual_DC_14 Register (Address = 3Eh) [Reset = 00h]

Manual_DC_14 is shown in Figure 2-38 and described in Table 2-46.

Return to the Summary Table.

Figure 2-38 Manual_DC_14 Register
76543210
manual_dc_d1
R/W-0h
Table 2-46 Manual_DC_14 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_d1R/W0h LED_D1 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%

2.8.16 Manual_DC_15 Register (Address = 3Fh) [Reset = 00h]

Manual_DC_15 is shown in Figure 2-39 and described in Table 2-47.

Return to the Summary Table.

Figure 2-39 Manual_DC_15 Register
76543210
manual_dc_d2
R/W-0h
Table 2-47 Manual_DC_15 Register Field Descriptions
BitFieldTypeResetDescription
7-0manual_dc_d2R/W0h LED_D2 current setting in manual mode
0h = 0
1h = 0.39%
2h = 0.78%
...
80h = 50.2%
...
FDh = 99.2%
FEh = 99.6%
FFh = 100%