SNVU886 September   2024 TPS37100-Q1

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5.     General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines
  6. 2Hardware
    1. 2.1 EVM Connectors
      1. 2.1.1 EVM Jumpers
      2. 2.1.2 EVM Test Points
    2. 2.2 EVM Setup and Operation
      1. 2.2.1 Input Supply Voltage (VDD)
      2. 2.2.2 SENSE
      3. 2.2.3 OUT A and OUT B
      4. 2.2.4 AEN & AOUT
      5. 2.2.5 Built-In Self-Test (BIST)
      6. 2.2.6 Built-In Self-Test Enable (BIST_EN )
      7. 2.2.7 CTR & CTS Time Delays
  7. 3Implementation Results
    1. 3.1 EVM Performance Results
  8. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1.     Trademarks
  10. 6Revision History

1.1 Introduction

The TPS3710XEVM helps design engineers to evaluate the operation and performance of the TPS37100-Q1 and TPS37102-Q1 family of overvoltage and undervoltage monitors.

This particular EVM configuration contains the TPS37100Z91DDYYRQ1, an adjustable undervoltage variant with Analog Eable (AEN) and Analog Out (AOUT) pins. The TPS3710XEVM offers connections to all input and output pins. Test points enable oscilloscope or multimeter measurements.

This user’s guide describes the operation of use of the TPS3710XEVM evaluation module (EVM), including setup instructions, a schematic diagram, printed-circuit board (PCB) layout drawings, and a bill of materials.