SPRUI33H November   2015  – June 2024 TMS320F280040-Q1 , TMS320F280040C-Q1 , TMS320F280041 , TMS320F280041-Q1 , TMS320F280041C , TMS320F280041C-Q1 , TMS320F280045 , TMS320F280048-Q1 , TMS320F280048C-Q1 , TMS320F280049 , TMS320F280049-Q1 , TMS320F280049C , TMS320F280049C-Q1

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3.     Glossary
    4.     Related Documentation From Texas Instruments
    5.     Support Resources
    6.     Trademarks
  3. 1 C2000™ Microcontrollers Software Support
    1. 1.1 Introduction
    2. 1.2 C2000Ware Structure
    3. 1.3 Documentation
    4. 1.4 Devices
    5. 1.5 Libraries
    6. 1.6 Code Composer Studio™ Integrated Development Environment (IDE)
    7. 1.7 SysConfig and PinMUX Tool
  4. 2 C28x Processor
    1. 2.1 Introduction
    2. 2.2 C28X Related Collateral
    3. 2.3 Features
    4. 2.4 Floating-Point Unit
    5. 2.5 Trigonometric Math Unit (TMU)
    6. 2.6 Viterbi, Complex Math, and CRC Unit (VCU)
  5. 3 System Control and Interrupts
    1. 3.1  Introduction
      1. 3.1.1 SYSCTL Related Collateral
    2. 3.2  Power Management
      1. 3.2.1 Internal 1.2-V Switching Regulator (DC-DC)
    3. 3.3  Device Identification and Configuration Registers
    4. 3.4  Resets
      1. 3.4.1 Reset Sources
      2. 3.4.2 External Reset (XRS)
      3. 3.4.3 Power-On Reset (POR)
      4. 3.4.4 Debugger Reset (SYSRS)
      5. 3.4.5 Watchdog Reset (WDRS)
      6. 3.4.6 NMI Watchdog Reset (NMIWDRS)
      7. 3.4.7 DCSM Safe Code Copy Reset (SCCRESET)
    5. 3.5  Peripheral Interrupts
      1. 3.5.1 Interrupt Concepts
      2. 3.5.2 Interrupt Architecture
        1. 3.5.2.1 Peripheral Stage
        2. 3.5.2.2 PIE Stage
        3. 3.5.2.3 CPU Stage
      3. 3.5.3 Interrupt Entry Sequence
      4. 3.5.4 Configuring and Using Interrupts
        1. 3.5.4.1 Enabling Interrupts
        2. 3.5.4.2 Handling Interrupts
        3. 3.5.4.3 Disabling Interrupts
        4. 3.5.4.4 Nesting Interrupts
        5. 3.5.4.5 Vector Address Validity Check
      5. 3.5.5 PIE Channel Mapping
        1. 3.5.5.1 PIE Interrupt Priority
          1. 3.5.5.1.1 Channel Priority
          2. 3.5.5.1.2 Group Priority
      6. 3.5.6 Vector Tables
    6. 3.6  Exceptions and Non-Maskable Interrupts
      1. 3.6.1 Configuring and Using NMIs
      2. 3.6.2 Emulation Considerations
      3. 3.6.3 NMI Sources
        1. 3.6.3.1 Missing Clock Detection
        2. 3.6.3.2 RAM Uncorrectable ECC Error
        3. 3.6.3.3 Flash Uncorrectable ECC Error
        4. 3.6.3.4 Software-Forced Error
      4. 3.6.4 Illegal Instruction Trap (ITRAP)
      5. 3.6.5 Error Pin
    7. 3.7  Clocking
      1. 3.7.1  Clock Sources
        1. 3.7.1.1 Primary Internal Oscillator (INTOSC2)
        2. 3.7.1.2 Backup Internal Oscillator (INTOSC1)
        3. 3.7.1.3 External Oscillator (XTAL)
      2. 3.7.2  Derived Clocks
        1. 3.7.2.1 Oscillator Clock (OSCCLK)
        2. 3.7.2.2 System PLL Output Clock (PLLRAWCLK)
      3. 3.7.3  Device Clock Domains
        1. 3.7.3.1 System Clock (PLLSYSCLK)
        2. 3.7.3.2 CPU Clock (CPUCLK)
        3. 3.7.3.3 CPU Subsystem Clock (SYSCLK and PERx.SYSCLK)
        4. 3.7.3.4 Low-Speed Peripheral Clock (LSPCLK and PERx.LSPCLK)
        5. 3.7.3.5 CAN Bit Clock
        6. 3.7.3.6 CPU Timer2 Clock (TIMER2CLK)
      4. 3.7.4  XCLKOUT
      5. 3.7.5  Clock Connectivity
      6. 3.7.6  Clock Source and PLL Setup
      7. 3.7.7  Using an External Crystal or Resonator
      8. 3.7.8  Using an External Oscillator
      9. 3.7.9  Choosing PLL Settings
      10. 3.7.10 System Clock Setup
      11. 3.7.11 Clock Configuration Examples
      12. 3.7.12 Missing Clock Detection
    8. 3.8  32-Bit CPU Timers 0/1/2
    9. 3.9  Watchdog Timer
      1. 3.9.1 Servicing the Watchdog Timer
      2. 3.9.2 Minimum Window Check
      3. 3.9.3 Watchdog Reset or Watchdog Interrupt Mode
      4. 3.9.4 Watchdog Operation in Low-Power Modes
      5. 3.9.5 Emulation Considerations
    10. 3.10 Low-Power Modes
      1. 3.10.1 IDLE
      2. 3.10.2 Guidelines on Software Emulation of STANDBY Mode
      3. 3.10.3 HALT
      4. 3.10.4 Flash Power-down Considerations
    11. 3.11 Memory Controller Module
      1. 3.11.1 Functional Description
        1. 3.11.1.1 Dedicated RAM (Mx RAM)
        2. 3.11.1.2 Local Shared RAM (LSx RAM)
        3. 3.11.1.3 Global Shared RAM (GSx RAM)
        4. 3.11.1.4 Message RAM (CLA MSGRAM)
        5. 3.11.1.5 Access Arbitration
        6. 3.11.1.6 Access Protection
          1. 3.11.1.6.1 CPU Fetch Protection
          2. 3.11.1.6.2 CPU Write Protection
          3. 3.11.1.6.3 CPU Read Protection
          4. 3.11.1.6.4 CLA Fetch Protection
          5. 3.11.1.6.5 CLA Write Protection
          6. 3.11.1.6.6 CLA Read Protection
          7. 3.11.1.6.7 DMA Write Protection
        7. 3.11.1.7 Memory Error Detection, Correction and Error Handling
          1. 3.11.1.7.1 Error Detection and Correction
          2. 3.11.1.7.2 Error Handling
        8. 3.11.1.8 Application Test Hooks for Error Detection and Correction
        9. 3.11.1.9 RAM Initialization
    12. 3.12 Flash and OTP Memory
      1. 3.12.1  Features
      2. 3.12.2  Flash Tools
      3. 3.12.3  Default Flash Configuration
      4. 3.12.4  Flash Bank, OTP and Pump
      5. 3.12.5  Flash Module Controller (FMC)
      6. 3.12.6  Flash and OTP and Wakeup Power-Down Modes
        1. 3.12.6.1 Flash/OTP and Pump Power Modes and Wakeup
        2. 3.12.6.2 Active Grace Period
      7. 3.12.7  Flash and OTP Performance
      8. 3.12.8  Flash Access Interface
        1. 3.12.8.1 Standard Access Mode
        2. 3.12.8.2 Prefetch Mode
        3. 3.12.8.3 Data Cache
      9. 3.12.9  Erase/Program Flash
        1. 3.12.9.1 Erase
        2. 3.12.9.2 Program
        3. 3.12.9.3 Verify
      10. 3.12.10 Error Correction Code (ECC) Protection
        1. 3.12.10.1 Single-Bit Data Error
        2. 3.12.10.2 Uncorrectable Error
        3. 3.12.10.3 SECDED Logic Correctness Check
        4. 3.12.10.4 Reading ECC Memory From a Higher Address Space
      11. 3.12.11 Reserved Locations Within Flash and OTP
      12. 3.12.12 Procedure to Change the Flash Control Registers
      13. 3.12.13 Simple Procedure to Modify an Application from RAM Configuration to Flash Configuration
    13. 3.13 Dual Code Security Module (DCSM)
      1. 3.13.1 Functional Description
        1. 3.13.1.1 CSM Passwords
        2. 3.13.1.2 Emulation Code Security Logic (ECSL)
        3. 3.13.1.3 CPU Secure Logic
        4. 3.13.1.4 Execute-Only Protection
        5. 3.13.1.5 Password Lock
        6. 3.13.1.6 JTAG Lock
        7. 3.13.1.7 Link Pointer and Zone Select
      2. 3.13.2 C Code Example to Get Zone Select Block Addr for Zone1 in BANK0
      3. 3.13.3 Flash and OTP Erase/Program
      4. 3.13.4 Safe Copy Code
      5. 3.13.5 SafeCRC
      6. 3.13.6 CSM Impact on Other On-Chip Resources
      7. 3.13.7 Incorporating Code Security in User Applications
        1. 3.13.7.1 Environments That Require Security Unlocking
        2. 3.13.7.2 CSM Password Match Flow
        3. 3.13.7.3 C Code Example to Unsecure C28x Zone1
        4. 3.13.7.4 C Code Example to Resecure C28x Zone1
        5. 3.13.7.5 Environments That Require ECSL Unlocking
        6. 3.13.7.6 ECSL Password Match Flow
        7. 3.13.7.7 ECSL Disable Considerations for any Zone
          1. 3.13.7.7.1 C Code Example to Disable ECSL for C28x-Zone1
        8. 3.13.7.8 Device Unique ID
    14. 3.14 System Control Register Configuration Restrictions
    15. 3.15 System Control Registers
      1. 3.15.1  System Control Base Address Table
      2. 3.15.2  CPUTIMER_REGS Registers
      3. 3.15.3  PIE_CTRL_REGS Registers
      4. 3.15.4  WD_REGS Registers
      5. 3.15.5  NMI_INTRUPT_REGS Registers
      6. 3.15.6  XINT_REGS Registers
      7. 3.15.7  DMA_CLA_SRC_SEL_REGS Registers
      8. 3.15.8  DEV_CFG_REGS Registers
      9. 3.15.9  CLK_CFG_REGS Registers
      10. 3.15.10 CPU_SYS_REGS Registers
      11. 3.15.11 PERIPH_AC_REGS Registers
      12. 3.15.12 DCSM_BANK0_Z1_REGS Registers
      13. 3.15.13 DCSM_BANK0_Z2_REGS Registers
      14. 3.15.14 DCSM_COMMON_REGS Registers
      15. 3.15.15 DCSM_BANK1_Z1_REGS Registers
      16. 3.15.16 DCSM_BANK1_Z2_REGS Registers
      17. 3.15.17 MEM_CFG_REGS Registers
      18. 3.15.18 ACCESS_PROTECTION_REGS Registers
      19. 3.15.19 MEMORY_ERROR_REGS Registers
      20. 3.15.20 FLASH_CTRL_REGS Registers
      21. 3.15.21 FLASH_ECC_REGS Registers
      22. 3.15.22 UID_REGS Registers
      23. 3.15.23 DCSM_BANK0_Z1_OTP Registers
      24. 3.15.24 DCSM_BANK0_Z2_OTP Registers
      25. 3.15.25 DCSM_BANK1_Z1_OTP Registers
      26. 3.15.26 DCSM_BANK1_Z2_OTP Registers
      27. 3.15.27 Register to Driverlib Function Mapping
        1. 3.15.27.1 ASYSCTL Registers to Driverlib Functions
        2. 3.15.27.2 CPUTIMER Registers to Driverlib Functions
        3. 3.15.27.3 DCSM Registers to Driverlib Functions
        4. 3.15.27.4 FLASH Registers to Driverlib Functions
        5. 3.15.27.5 MEMCFG Registers to Driverlib Functions
        6. 3.15.27.6 NMI Registers to Driverlib Functions
        7. 3.15.27.7 PIE Registers to Driverlib Functions
        8. 3.15.27.8 SYSCTL Registers to Driverlib Functions
        9. 3.15.27.9 XINT Registers to Driverlib Functions
  6. 4 ROM Code and Peripheral Booting
    1. 4.1 Introduction
    2. 4.2 Device Boot Sequence
    3. 4.3 Device Boot Modes
      1. 4.3.1 Configuring Alternate Boot Mode Pins
      2. 4.3.2 Configuring Alternate Boot Mode Options
      3. 4.3.3 Boot Mode Example Use Cases
        1. 4.3.3.1 Zero Boot Mode Select Pins
        2. 4.3.3.2 One Boot Mode Select Pin
    4. 4.4 Device Boot Flow Diagrams
      1. 4.4.1 Emulation Boot Flow Diagram
      2. 4.4.2 Standalone Boot Flow Diagram
    5. 4.5 Device Reset and Exception Handling
      1. 4.5.1 Reset Causes and Handling
      2. 4.5.2 Exceptions and Interrupts Handling
    6. 4.6 Boot ROM Description
      1. 4.6.1  Boot ROM Registers
      2. 4.6.2  Boot ROM User OTP
      3. 4.6.3  Entry Points
      4. 4.6.4  Wait Points
      5. 4.6.5  Memory Maps
        1. 4.6.5.1 Boot ROM Memory Map
        2. 4.6.5.2 CLA Data ROM Memory Map
        3. 4.6.5.3 Reserved RAM and Flash Memory Map
      6. 4.6.6  ROM Tables
        1. 4.6.6.1 Boot ROM Tables
        2. 4.6.6.2 CLA ROM Tables
      7. 4.6.7  Boot Modes
        1. 4.6.7.1 Wait Boot Mode
        2. 4.6.7.2 SCI Boot Mode
        3. 4.6.7.3 SPI Boot Mode
        4. 4.6.7.4 I2C Boot Mode
        5. 4.6.7.5 Parallel Boot Mode
        6. 4.6.7.6 CAN Boot Mode
      8. 4.6.8  Boot Data Stream Structure
        1. 4.6.8.1 Bootloader Data Stream Structure
          1. 4.6.8.1.1 Data Stream Structure 8-bit
        2.       247
      9. 4.6.9  GPIO Assignments
      10. 4.6.10 Secure ROM Function APIs
      11. 4.6.11 DCSM Usage
      12. 4.6.12 Clock Initialization
      13. 4.6.13 Boot Status Information
        1. 4.6.13.1 Booting Status
        2. 4.6.13.2 Flash Single-Bit Error Status
      14. 4.6.14 ROM Version
    7. 4.7 The C2000 Hex Utility
      1. 4.7.1 HEX2000.exe Command Syntax
  7. 5 Control Law Accelerator (CLA)
    1. 5.1 Introduction
      1. 5.1.1 Features
      2. 5.1.2 CLA Related Collateral
      3. 5.1.3 Block Diagram
    2. 5.2 CLA Interface
      1. 5.2.1 CLA Memory
      2. 5.2.2 CLA Memory Bus
      3. 5.2.3 Shared Peripherals and EALLOW Protection
      4. 5.2.4 CLA Tasks and Interrupt Vectors
      5. 5.2.5 CLA Software Interrupt to CPU
    3. 5.3 CLA, DMA, and CPU Arbitration
      1. 5.3.1 CLA Message RAM
      2. 5.3.2 CLA Program Memory
      3. 5.3.3 CLA Data Memory
      4. 5.3.4 Peripheral Registers (ePWM, HRPWM, Comparator)
    4. 5.4 CLA Configuration and Debug
      1. 5.4.1 Building a CLA Application
      2. 5.4.2 Typical CLA Initialization Sequence
      3. 5.4.3 Debugging CLA Code
        1. 5.4.3.1 Software Breakpoint Support (MDEBUGSTOP1)
        2. 5.4.3.2 Legacy Breakpoint Support (MDEBUGSTOP)
      4. 5.4.4 CLA Illegal Opcode Behavior
      5. 5.4.5 Resetting the CLA
    5. 5.5 Pipeline
      1. 5.5.1 Pipeline Overview
      2. 5.5.2 CLA Pipeline Alignment
        1. 5.5.2.1 Code Fragment For MBCNDD, MCCNDD, or MRCNDD
        2.       286
        3. 5.5.2.2 Code Fragment for Loading MAR0 or MAR1
        4.       288
        5. 5.5.2.3 ADC Early Interrupt to CLA Response
      3. 5.5.3 Parallel Instructions
        1. 5.5.3.1 Math Operation with Parallel Load
        2. 5.5.3.2 Multiply with Parallel Add
      4. 5.5.4 CLA Task Execution Latency
    6. 5.6 Software
      1. 5.6.1 CLA Examples
        1. 5.6.1.1 CLA arcsine(x) using a lookup table (cla_asin_cpu01)
        2. 5.6.1.2 CLA arctangent(x) using a lookup table (cla_atan_cpu01)
        3. 5.6.1.3 CLA background nesting task
        4. 5.6.1.4 Controlling PWM output using CLA
        5. 5.6.1.5 Just-in-time ADC sampling with CLA
        6. 5.6.1.6 Optimal offloading of control algorithms to CLA
        7. 5.6.1.7 Handling shared resources across C28x and CLA
    7. 5.7 Instruction Set
      1. 5.7.1 Instruction Descriptions
      2. 5.7.2 Addressing Modes and Encoding
      3. 5.7.3 Instructions
        1.       MABSF32 MRa, MRb
        2.       MADD32 MRa, MRb, MRc
        3.       MADDF32 MRa, #16FHi, MRb
        4.       MADDF32 MRa, MRb, #16FHi
        5.       MADDF32 MRa, MRb, MRc
        6.       MADDF32 MRd, MRe, MRf||MMOV32 mem32, MRa
        7.       MADDF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        8.       MAND32 MRa, MRb, MRc
        9.       MASR32 MRa, #SHIFT
        10.       MBCNDD 16BitDest [, CNDF]
        11.       MCCNDD 16BitDest [, CNDF]
        12.       MCLRC BGINTM
        13.       MCMP32 MRa, MRb
        14.       MCMPF32 MRa, MRb
        15.       MCMPF32 MRa, #16FHi
        16.       MDEBUGSTOP
        17.       MDEBUGSTOP1
        18.       MEALLOW
        19.       MEDIS
        20.       MEINVF32 MRa, MRb
        21.       MEISQRTF32 MRa, MRb
        22.       MF32TOI16 MRa, MRb
        23.       MF32TOI16R MRa, MRb
        24.       MF32TOI32 MRa, MRb
        25.       MF32TOUI16 MRa, MRb
        26.       MF32TOUI16R MRa, MRb
        27.       MF32TOUI32 MRa, MRb
        28.       MFRACF32 MRa, MRb
        29.       MI16TOF32 MRa, MRb
        30.       MI16TOF32 MRa, mem16
        31.       MI32TOF32 MRa, mem32
        32.       MI32TOF32 MRa, MRb
        33.       MLSL32 MRa, #SHIFT
        34.       MLSR32 MRa, #SHIFT
        35.       MMACF32 MR3, MR2, MRd, MRe, MRf ||MMOV32 MRa, mem32
        36.       MMAXF32 MRa, MRb
        37.       MMAXF32 MRa, #16FHi
        38.       MMINF32 MRa, MRb
        39.       MMINF32 MRa, #16FHi
        40.       MMOV16 MARx, MRa, #16I
        41.       MMOV16 MARx, mem16
        42.       MMOV16 mem16, MARx
        43.       MMOV16 mem16, MRa
        44.       MMOV32 mem32, MRa
        45.       MMOV32 mem32, MSTF
        46.       MMOV32 MRa, mem32 [, CNDF]
        47.       MMOV32 MRa, MRb [, CNDF]
        48.       MMOV32 MSTF, mem32
        49.       MMOVD32 MRa, mem32
        50.       MMOVF32 MRa, #32F
        51.       MMOVI16 MARx, #16I
        52.       MMOVI32 MRa, #32FHex
        53.       MMOVIZ MRa, #16FHi
        54.       MMOVZ16 MRa, mem16
        55.       MMOVXI MRa, #16FLoHex
        56.       MMPYF32 MRa, MRb, MRc
        57.       MMPYF32 MRa, #16FHi, MRb
        58.       MMPYF32 MRa, MRb, #16FHi
        59.       MMPYF32 MRa, MRb, MRc||MADDF32 MRd, MRe, MRf
        60.       MMPYF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        61.       MMPYF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        62.       MMPYF32 MRa, MRb, MRc ||MSUBF32 MRd, MRe, MRf
        63.       MNEGF32 MRa, MRb[, CNDF]
        64.       MNOP
        65.       MOR32 MRa, MRb, MRc
        66.       MRCNDD [CNDF]
        67.       MSETC BGINTM
        68.       MSETFLG FLAG, VALUE
        69.       MSTOP
        70.       MSUB32 MRa, MRb, MRc
        71.       MSUBF32 MRa, MRb, MRc
        72.       MSUBF32 MRa, #16FHi, MRb
        73.       MSUBF32 MRd, MRe, MRf ||MMOV32 MRa, mem32
        74.       MSUBF32 MRd, MRe, MRf ||MMOV32 mem32, MRa
        75.       MSWAPF MRa, MRb [, CNDF]
        76.       MTESTTF CNDF
        77.       MUI16TOF32 MRa, mem16
        78.       MUI16TOF32 MRa, MRb
        79.       MUI32TOF32 MRa, mem32
        80.       MUI32TOF32 MRa, MRb
        81.       MXOR32 MRa, MRb, MRc
    8. 5.8 CLA Registers
      1. 5.8.1 CLA Base Address Table
      2. 5.8.2 CLA_ONLY_REGS Registers
      3. 5.8.3 CLA_SOFTINT_REGS Registers
      4. 5.8.4 CLA_REGS Registers
      5. 5.8.5 CLA Registers to Driverlib Functions
  8. 6 Dual-Clock Comparator (DCC)
    1. 6.1 Introduction
      1. 6.1.1 Features
      2. 6.1.2 Block Diagram
    2. 6.2 Module Operation
      1. 6.2.1 Configuring DCC Counters
      2. 6.2.2 Single-Shot Measurement Mode
    3. 6.3 Interrupts
    4. 6.4 Software
      1. 6.4.1 DCC Examples
        1. 6.4.1.1 DCC Single shot Clock verification
        2. 6.4.1.2 DCC Single shot Clock measurement
        3. 6.4.1.3 DCC Continuous clock monitoring
        4. 6.4.1.4 DCC Continuous clock monitoring
        5. 6.4.1.5 DCC Detection of clock failure
    5. 6.5 DCC Registers
      1. 6.5.1 DCC Base Address Table
      2. 6.5.2 DCC_REGS Registers
      3. 6.5.3 DCC Registers to Driverlib Functions
  9. 7 CLA Program ROM CRC (CLAPROMCRC)
    1. 7.1 Overview
    2. 7.2 Functional Description
      1. 7.2.1 Start Address
      2. 7.2.2 Seed
      3. 7.2.3 Halt
      4. 7.2.4 Result and Comparison
    3. 7.3 Software
      1. 7.3.1 CLAPROMCRC Examples
        1. 7.3.1.1 CLAPROMCRC CPU Interrupt Example
    4. 7.4 CLAPROM Registers
      1. 7.4.1 CLA PROM CRC Base Address Table
      2. 7.4.2 CLA_PROM_CRC32_REGS Registers
      3. 7.4.3 CLAPROMCRC Registers to Driverlib Functions
  10. 8 General-Purpose Input/Output (GPIO)
    1. 8.1 Introduction
      1. 8.1.1 GPIO Related Collateral
    2. 8.2 Configuration Overview
    3. 8.3 Digital Inputs on ADC Pins (AIOs)
    4. 8.4 Digital General-Purpose I/O Control
    5. 8.5 Input Qualification
      1. 8.5.1 No Synchronization (Asynchronous Input)
      2. 8.5.2 Synchronization to SYSCLKOUT Only
      3. 8.5.3 Qualification Using a Sampling Window
    6. 8.6 GPIO and Peripheral Muxing
      1. 8.6.1 GPIO Muxing
      2. 8.6.2 Peripheral Muxing
    7. 8.7 Internal Pullup Configuration Requirements
    8. 8.8 Software
      1. 8.8.1 GPIO Examples
        1. 8.8.1.1 Device GPIO Setup
        2. 8.8.1.2 Device GPIO Toggle
        3. 8.8.1.3 Device GPIO Interrupt
        4. 8.8.1.4 External Interrupt (XINT)
      2. 8.8.2 LED Examples
        1. 8.8.2.1 LED Blinky Example with DCSM
    9. 8.9 GPIO Registers
      1. 8.9.1 GPIO Base Address Table
      2. 8.9.2 GPIO_CTRL_REGS Registers
      3. 8.9.3 GPIO_DATA_REGS Registers
      4. 8.9.4 GPIO Registers to Driverlib Functions
  11. 9 Crossbar (X-BAR)
    1. 9.1 Input X-BAR
    2. 9.2 ePWM, CLB, and GPIO Output X-BAR
      1. 9.2.1 ePWM X-BAR
        1. 9.2.1.1 ePWM X-BAR Architecture
      2. 9.2.2 CLB X-BAR
        1. 9.2.2.1 CLB X-BAR Architecture
      3. 9.2.3 GPIO Output X-BAR
        1. 9.2.3.1 GPIO Output X-BAR Architecture
      4. 9.2.4 X-BAR Flags
    3. 9.3 XBAR Registers
      1. 9.3.1 XBAR Base Address Table
      2. 9.3.2 INPUT_XBAR_REGS Registers
      3. 9.3.3 XBAR_REGS Registers
      4. 9.3.4 EPWM_XBAR_REGS Registers
      5. 9.3.5 CLB_XBAR_REGS Registers
      6. 9.3.6 OUTPUT_XBAR_REGS Registers
      7. 9.3.7 Register to Driverlib Function Mapping
        1. 9.3.7.1 INPUTXBAR Registers to Driverlib Functions
        2. 9.3.7.2 XBAR Registers to Driverlib Functions
        3. 9.3.7.3 EPWMXBAR Registers to Driverlib Functions
        4. 9.3.7.4 CLBXBAR Registers to Driverlib Functions
        5. 9.3.7.5 OUTPUTXBAR Registers to Driverlib Functions
  12. 10Direct Memory Access (DMA)
    1. 10.1 Introduction
      1. 10.1.1 Features
      2. 10.1.2 Block Diagram
    2. 10.2 Architecture
      1. 10.2.1 Peripheral Interrupt Event Trigger Sources
      2. 10.2.2 DMA Bus
    3. 10.3 Address Pointer and Transfer Control
    4. 10.4 Pipeline Timing and Throughput
    5. 10.5 CPU and CLA Arbitration
    6. 10.6 Channel Priority
      1. 10.6.1 Round-Robin Mode
      2. 10.6.2 Channel 1 High-Priority Mode
    7. 10.7 Overrun Detection Feature
    8. 10.8 Software
      1. 10.8.1 DMA Examples
        1. 10.8.1.1 DMA GSRAM Transfer (dma_ex1_gsram_transfer)
        2. 10.8.1.2 DMA GSRAM Transfer (dma_ex2_gsram_transfer)
    9. 10.9 DMA Registers
      1. 10.9.1 DMA Base Address Table
      2. 10.9.2 DMA_REGS Registers
      3. 10.9.3 DMA_CH_REGS Registers
      4. 10.9.4 DMA_CLA_SRC_SEL_REGS Registers
      5. 10.9.5 DMA Registers to Driverlib Functions
  13. 11Embedded Real-time Analysis and Diagnostic (ERAD)
    1. 11.1 Introduction
      1. 11.1.1 ERAD Related Collateral
    2. 11.2 Enhanced Bus Comparator Unit
      1. 11.2.1 Enhanced Bus Comparator Unit Operations
    3. 11.3 System Event Counter Unit
      1. 11.3.1 System Event Counter Modes
        1. 11.3.1.1 Counting Active Levels Versus Edges
        2. 11.3.1.2 Max Mode
        3. 11.3.1.3 Input Signal Selection
      2. 11.3.2 Reset on Event
      3. 11.3.3 Operation Conditions
    4. 11.4 ERAD Ownership, Initialization and Reset
    5. 11.5 ERAD Programming Sequence
      1. 11.5.1 Hardware Breakpoint and Hardware Watch Point Programming Sequence
      2. 11.5.2 Timer and Counter Programming Sequence
    6. 11.6 Software
      1. 11.6.1 ERAD Examples
        1. 11.6.1.1  ERAD Profiling Interrupts
        2. 11.6.1.2  ERAD Profile Function
        3. 11.6.1.3  ERAD Profile Function
        4. 11.6.1.4  ERAD HWBP Monitor Program Counter
        5. 11.6.1.5  ERAD HWBP Monitor Program Counter
        6. 11.6.1.6  ERAD Profile Function
        7. 11.6.1.7  ERAD HWBP Stack Overflow Detection
        8. 11.6.1.8  ERAD HWBP Stack Overflow Detection
        9. 11.6.1.9  ERAD Stack Overflow
        10. 11.6.1.10 ERAD Profile Interrupts CLA
        11. 11.6.1.11 ERAD Profiling Interrupts
        12. 11.6.1.12 ERAD Profiling Interrupts
        13. 11.6.1.13 ERAD MEMORY ACCESS RESTRICT
        14. 11.6.1.14 ERAD INTERRUPT ORDER
        15. 11.6.1.15 ERAD AND CLB
        16. 11.6.1.16 ERAD PWM PROTECTION
    7. 11.7 ERAD Registers
      1. 11.7.1 ERAD Base Address Table
      2. 11.7.2 ERAD_GLOBAL_REGS Registers
      3. 11.7.3 ERAD_HWBP_REGS Registers
      4. 11.7.4 ERAD_COUNTER_REGS Registers
      5. 11.7.5 ERAD Registers to Driverlib Functions
  14. 12Analog Subsystem
    1. 12.1 Introduction
      1. 12.1.1 Features
      2. 12.1.2 Block Diagram
    2. 12.2 Optimizing Power-Up Time
    3. 12.3 Digital Inputs on ADC Pins (AIOs)
    4. 12.4 Digital Inputs and Outputs on ADC Pins (AGPIOs)
    5. 12.5 Analog Pins and Internal Connections
    6. 12.6 Analog Subsystem Registers
      1. 12.6.1 Analog Subsystem Base Address Table
      2. 12.6.2 ANALOG_SUBSYS_REGS Registers
  15. 13Analog-to-Digital Converter (ADC)
    1. 13.1  Introduction
      1. 13.1.1 ADC Related Collateral
      2. 13.1.2 Features
      3. 13.1.3 Block Diagram
    2. 13.2  ADC Configurability
      1. 13.2.1 Clock Configuration
      2. 13.2.2 Resolution
      3. 13.2.3 Voltage Reference
        1. 13.2.3.1 External Reference Mode
        2. 13.2.3.2 Internal Reference Mode
        3. 13.2.3.3 Ganged References
        4. 13.2.3.4 Selecting Reference Mode
      4. 13.2.4 Signal Mode
      5. 13.2.5 Expected Conversion Results
      6. 13.2.6 Interpreting Conversion Results
    3. 13.3  SOC Principle of Operation
      1. 13.3.1 SOC Configuration
      2. 13.3.2 Trigger Operation
      3. 13.3.3 ADC Acquisition (Sample and Hold) Window
      4. 13.3.4 ADC Input Models
      5. 13.3.5 Channel Selection
    4. 13.4  SOC Configuration Examples
      1. 13.4.1 Single Conversion from ePWM Trigger
      2. 13.4.2 Oversampled Conversion from ePWM Trigger
      3. 13.4.3 Multiple Conversions from CPU Timer Trigger
      4. 13.4.4 Software Triggering of SOCs
    5. 13.5  ADC Conversion Priority
    6. 13.6  Burst Mode
      1. 13.6.1 Burst Mode Example
      2. 13.6.2 Burst Mode Priority Example
    7. 13.7  EOC and Interrupt Operation
      1. 13.7.1 Interrupt Overflow
      2. 13.7.2 Continue to Interrupt Mode
      3. 13.7.3 Early Interrupt Configuration Mode
    8. 13.8  Post-Processing Blocks
      1. 13.8.1 PPB Offset Correction
      2. 13.8.2 PPB Error Calculation
      3. 13.8.3 PPB Limit Detection and Zero-Crossing Detection
      4. 13.8.4 PPB Sample Delay Capture
    9. 13.9  Opens/Shorts Detection Circuit (OSDETECT)
      1. 13.9.1 Implementation
      2. 13.9.2 Detecting an Open Input Pin
      3. 13.9.3 Detecting a Shorted Input Pin
    10. 13.10 Power-Up Sequence
    11. 13.11 ADC Calibration
      1. 13.11.1 ADC Zero Offset Calibration
    12. 13.12 ADC Timings
      1. 13.12.1 ADC Timing Diagrams
    13. 13.13 Additional Information
      1. 13.13.1 Ensuring Synchronous Operation
        1. 13.13.1.1 Basic Synchronous Operation
        2. 13.13.1.2 Synchronous Operation with Multiple Trigger Sources
        3. 13.13.1.3 Synchronous Operation with Uneven SOC Numbers
        4. 13.13.1.4 Non-overlapping Conversions
      2. 13.13.2 Choosing an Acquisition Window Duration
      3. 13.13.3 Achieving Simultaneous Sampling
      4. 13.13.4 Result Register Mapping
      5. 13.13.5 Internal Temperature Sensor
      6. 13.13.6 Designing an External Reference Circuit
      7. 13.13.7 ADC-DAC Loopback Testing
      8. 13.13.8 Internal Test Mode
      9. 13.13.9 ADC Gain and Offset Calibration
    14. 13.14 Software
      1. 13.14.1 ADC Examples
        1. 13.14.1.1  ADC Software Triggering
        2. 13.14.1.2  ADC ePWM Triggering
        3. 13.14.1.3  ADC Temperature Sensor Conversion
        4. 13.14.1.4  ADC Synchronous SOC Software Force (adc_soc_software_sync)
        5. 13.14.1.5  ADC Continuous Triggering (adc_soc_continuous)
        6. 13.14.1.6  ADC Continuous Conversions Read by DMA (adc_soc_continuous_dma)
        7. 13.14.1.7  ADC PPB Offset (adc_ppb_offset)
        8. 13.14.1.8  ADC PPB Limits (adc_ppb_limits)
        9. 13.14.1.9  ADC PPB Delay Capture (adc_ppb_delay)
        10. 13.14.1.10 ADC ePWM Triggering Multiple SOC
        11. 13.14.1.11 ADC Burst Mode
        12. 13.14.1.12 ADC Burst Mode Oversampling
        13. 13.14.1.13 ADC SOC Oversampling
        14. 13.14.1.14 ADC PPB PWM trip (adc_ppb_pwm_trip)
        15. 13.14.1.15 ADC Open Shorts Detection (adc_open_shorts_detection)
    15. 13.15 ADC Registers
      1. 13.15.1 ADC Base Address Table
      2. 13.15.2 ADC_RESULT_REGS Registers
      3. 13.15.3 ADC_REGS Registers
      4. 13.15.4 ADC Registers to Driverlib Functions
  16. 14Programmable Gain Amplifier (PGA)
    1. 14.1  Programmable Gain Amplifier (PGA) Overview
      1. 14.1.1 Features
      2. 14.1.2 Block Diagram
    2. 14.2  Linear Output Range
    3. 14.3  Gain Modes
    4. 14.4  External Filtering
    5. 14.5  Error Calibration
      1. 14.5.1 Offset Error
      2. 14.5.2 Gain Error
    6. 14.6  Ground Routing
    7. 14.7  Enabling and Disabling the PGA Clock
    8. 14.8  Lock Register
    9. 14.9  Examples
      1. 14.9.1 Direct Amplifier
      2. 14.9.2 RC Filter
    10. 14.10 Analog Front End Integration
      1. 14.10.1 ADC
        1. 14.10.1.1 Unfiltered Acquisition Window
        2. 14.10.1.2 Filtered Acquisition Window
      2. 14.10.2 CMPSS
      3. 14.10.3 Buffered DAC
      4. 14.10.4 Alternate Functions
    11. 14.11 Software
      1. 14.11.1 PGA Examples
        1. 14.11.1.1 PGA DAC-ADC External Loopback Example
        2. 14.11.1.2 PGA DAC-ADC External Loopback Example
    12. 14.12 PGA Registers
      1. 14.12.1 PGA Base Address Table
      2. 14.12.2 PGA_REGS Registers
      3. 14.12.3 PGA Registers to Driverlib Functions
  17. 15Buffered Digital-to-Analog Converter (DAC)
    1. 15.1 Introduction
      1. 15.1.1 DAC Related Collateral
      2. 15.1.2 Features
      3. 15.1.3 Block Diagram
    2. 15.2 Using the DAC
      1. 15.2.1 Initialization Sequence
      2. 15.2.2 DAC Offset Adjustment
      3. 15.2.3 EPWMSYNCPER Signal
    3. 15.3 Lock Registers
    4. 15.4 Software
      1. 15.4.1 DAC Examples
        1. 15.4.1.1 Buffered DAC Enable
        2. 15.4.1.2 Buffered DAC Random
        3. 15.4.1.3 Buffered DAC Sine (buffdac_sine)
    5. 15.5 DAC Registers
      1. 15.5.1 DAC Base Address Table
      2. 15.5.2 DAC_REGS Registers
      3. 15.5.3 DAC Registers to Driverlib Functions
  18. 16Comparator Subsystem (CMPSS)
    1. 16.1 Introduction
      1. 16.1.1 CMPSS Related Collateral
      2. 16.1.2 Features
      3. 16.1.3 Block Diagram
    2. 16.2 Comparator
    3. 16.3 Reference DAC
    4. 16.4 Ramp Generator
      1. 16.4.1 Ramp Generator Overview
      2. 16.4.2 Ramp Generator Behavior
      3. 16.4.3 Ramp Generator Behavior at Corner Cases
    5. 16.5 Digital Filter
      1. 16.5.1 Filter Initialization Sequence
    6. 16.6 Using the CMPSS
      1. 16.6.1 LATCHCLR, EPWMSYNCPER, and EPWMBLANK Signals
      2. 16.6.2 Synchronizer, Digital Filter, and Latch Delays
      3. 16.6.3 Calibrating the CMPSS
      4. 16.6.4 Enabling and Disabling the CMPSS Clock
    7. 16.7 Software
      1. 16.7.1 CMPSS Examples
        1. 16.7.1.1 CMPSS Asynchronous Trip
        2. 16.7.1.2 CMPSS Digital Filter Configuration
    8. 16.8 CMPSS Registers
      1. 16.8.1 CMPSS Base Address Table
      2. 16.8.2 CMPSS_REGS Registers
      3. 16.8.3 CMPSS Registers to Driverlib Functions
  19. 17Sigma Delta Filter Module (SDFM)
    1. 17.1  Introduction
      1. 17.1.1 SDFM Related Collateral
      2. 17.1.2 Features
      3. 17.1.3 Block Diagram
    2. 17.2  Configuring Device Pins
    3. 17.3  Input Control Unit
    4. 17.4  Sinc Filter
      1. 17.4.1 Data Rate and Latency of the Sinc Filter
    5. 17.5  Data (Primary) Filter Unit
      1. 17.5.1 32-bit or 16-bit Data Filter Output Representation
      2. 17.5.2 Data FIFO
      3. 17.5.3 SDSYNC Event
    6. 17.6  Comparator (Secondary) Filter Unit
      1. 17.6.1 Higher Threshold (HLT) Comparators
      2. 17.6.2 Lower Threshold (LLT) Comparators
    7. 17.7  Theoretical SDFM Filter Output
    8. 17.8  Interrupt Unit
      1. 17.8.1 SDFM (SDyERR) Interrupt Sources
      2. 17.8.2 Data Ready (DRINT) Interrupt Sources
    9. 17.9  Software
      1. 17.9.1 SDFM Examples
        1. 17.9.1.1 SDFM Filter Sync CPU
        2. 17.9.1.2 SDFM Filter Sync CLA
        3. 17.9.1.3 SDFM Filter Sync DMA
        4. 17.9.1.4 SDFM PWM Sync
        5. 17.9.1.5 SDFM Type 1 Filter FIFO
    10. 17.10 SDFM Registers
      1. 17.10.1 SDFM Base Address Table
      2. 17.10.2 SDFM_REGS Registers
      3. 17.10.3 SDFM Registers to Driverlib Functions
  20. 18Enhanced Pulse Width Modulator (ePWM)
    1. 18.1  Introduction
      1. 18.1.1 EPWM Related Collateral
      2. 18.1.2 Submodule Overview
    2. 18.2  Configuring Device Pins
    3. 18.3  ePWM Modules Overview
    4. 18.4  Time-Base (TB) Submodule
      1. 18.4.1 Purpose of the Time-Base Submodule
      2. 18.4.2 Controlling and Monitoring the Time-Base Submodule
      3. 18.4.3 Calculating PWM Period and Frequency
        1. 18.4.3.1 Time-Base Period Shadow Register
        2. 18.4.3.2 Time-Base Clock Synchronization
        3. 18.4.3.3 Time-Base Counter Synchronization
      4. 18.4.4 Phase Locking the Time-Base Clocks of Multiple ePWM Modules
      5. 18.4.5 Simultaneous Writes to TBPRD and CMPx Registers Between ePWM Modules
      6. 18.4.6 Time-Base Counter Modes and Timing Waveforms
      7. 18.4.7 Global Load
        1. 18.4.7.1 Global Load Pulse Pre-Scalar
        2. 18.4.7.2 One-Shot Load Mode
        3. 18.4.7.3 One-Shot Sync Mode
    5. 18.5  Counter-Compare (CC) Submodule
      1. 18.5.1 Purpose of the Counter-Compare Submodule
      2. 18.5.2 Controlling and Monitoring the Counter-Compare Submodule
      3. 18.5.3 Operational Highlights for the Counter-Compare Submodule
      4. 18.5.4 Count Mode Timing Waveforms
    6. 18.6  Action-Qualifier (AQ) Submodule
      1. 18.6.1 Purpose of the Action-Qualifier Submodule
      2. 18.6.2 Action-Qualifier Submodule Control and Status Register Definitions
      3. 18.6.3 Action-Qualifier Event Priority
      4. 18.6.4 AQCTLA and AQCTLB Shadow Mode Operations
      5. 18.6.5 Configuration Requirements for Common Waveforms
    7. 18.7  Dead-Band Generator (DB) Submodule
      1. 18.7.1 Purpose of the Dead-Band Submodule
      2. 18.7.2 Dead-band Submodule Additional Operating Modes
      3. 18.7.3 Operational Highlights for the Dead-Band Submodule
    8. 18.8  PWM Chopper (PC) Submodule
      1. 18.8.1 Purpose of the PWM Chopper Submodule
      2. 18.8.2 Operational Highlights for the PWM Chopper Submodule
      3. 18.8.3 Waveforms
        1. 18.8.3.1 One-Shot Pulse
        2. 18.8.3.2 Duty Cycle Control
    9. 18.9  Trip-Zone (TZ) Submodule
      1. 18.9.1 Purpose of the Trip-Zone Submodule
      2. 18.9.2 Operational Highlights for the Trip-Zone Submodule
        1. 18.9.2.1 Trip-Zone Configurations
      3. 18.9.3 Generating Trip Event Interrupts
    10. 18.10 Event-Trigger (ET) Submodule
      1. 18.10.1 Operational Overview of the ePWM Event-Trigger Submodule
    11. 18.11 Digital Compare (DC) Submodule
      1. 18.11.1 Purpose of the Digital Compare Submodule
      2. 18.11.2 Enhanced Trip Action Using CMPSS
      3. 18.11.3 Using CMPSS to Trip the ePWM on a Cycle-by-Cycle Basis
      4. 18.11.4 Operation Highlights of the Digital Compare Submodule
        1. 18.11.4.1 Digital Compare Events
        2. 18.11.4.2 Event Filtering
        3. 18.11.4.3 Valley Switching
    12. 18.12 ePWM Crossbar (X-BAR)
    13. 18.13 Applications to Power Topologies
      1. 18.13.1  Overview of Multiple Modules
      2. 18.13.2  Key Configuration Capabilities
      3. 18.13.3  Controlling Multiple Buck Converters With Independent Frequencies
      4. 18.13.4  Controlling Multiple Buck Converters With Same Frequencies
      5. 18.13.5  Controlling Multiple Half H-Bridge (HHB) Converters
      6. 18.13.6  Controlling Dual 3-Phase Inverters for Motors (ACI and PMSM)
      7. 18.13.7  Practical Applications Using Phase Control Between PWM Modules
      8. 18.13.8  Controlling a 3-Phase Interleaved DC/DC Converter
      9. 18.13.9  Controlling Zero Voltage Switched Full Bridge (ZVSFB) Converter
      10. 18.13.10 Controlling a Peak Current Mode Controlled Buck Module
      11. 18.13.11 Controlling H-Bridge LLC Resonant Converter
    14. 18.14 Register Lock Protection
    15. 18.15 High-Resolution Pulse Width Modulator (HRPWM)
      1. 18.15.1 Operational Description of HRPWM
        1. 18.15.1.1 Controlling the HRPWM Capabilities
        2. 18.15.1.2 HRPWM Source Clock
        3. 18.15.1.3 Configuring the HRPWM
        4. 18.15.1.4 Configuring High-Resolution in Deadband Rising-Edge and Falling-Edge Delay
        5. 18.15.1.5 Principle of Operation
          1. 18.15.1.5.1 Edge Positioning
          2. 18.15.1.5.2 Scaling Considerations
          3. 18.15.1.5.3 Duty Cycle Range Limitation
          4. 18.15.1.5.4 High-Resolution Period
            1. 18.15.1.5.4.1 High-Resolution Period Configuration
        6. 18.15.1.6 Deadband High-Resolution Operation
        7. 18.15.1.7 Scale Factor Optimizing Software (SFO)
        8. 18.15.1.8 HRPWM Examples Using Optimized Assembly Code
          1. 18.15.1.8.1 #Defines for HRPWM Header Files
          2. 18.15.1.8.2 Implementing a Simple Buck Converter
            1. 18.15.1.8.2.1 HRPWM Buck Converter Initialization Code
            2. 18.15.1.8.2.2 HRPWM Buck Converter Run-Time Code
          3. 18.15.1.8.3 Implementing a DAC Function Using an R+C Reconstruction Filter
            1. 18.15.1.8.3.1 PWM DAC Function Initialization Code
            2. 18.15.1.8.3.2 PWM DAC Function Run-Time Code
      2. 18.15.2 SFO Library Software - SFO_TI_Build_V8.lib
        1. 18.15.2.1 Scale Factor Optimizer Function - int SFO()
        2. 18.15.2.2 Software Usage
          1. 18.15.2.2.1 A Sample of How to Add "Include" Files
          2.        840
          3. 18.15.2.2.2 Declaring an Element
          4.        842
          5. 18.15.2.2.3 Initializing With a Scale Factor Value
          6.        844
          7. 18.15.2.2.4 SFO Function Calls
    16. 18.16 Software
      1. 18.16.1 EPWM Examples
        1. 18.16.1.1  ePWM Trip Zone
        2. 18.16.1.2  ePWM Up Down Count Action Qualifier
        3. 18.16.1.3  ePWM Synchronization
        4. 18.16.1.4  ePWM Digital Compare
        5. 18.16.1.5  ePWM Digital Compare Event Filter Blanking Window
        6. 18.16.1.6  ePWM Valley Switching
        7. 18.16.1.7  ePWM Digital Compare Edge Filter
        8. 18.16.1.8  ePWM Deadband
        9. 18.16.1.9  ePWM DMA
        10. 18.16.1.10 ePWM Chopper
        11. 18.16.1.11 EPWM Configure Signal
        12. 18.16.1.12 Realization of Monoshot mode
        13. 18.16.1.13 EPWM Action Qualifier (epwm_up_aq)
      2. 18.16.2 HRPWM Examples
        1. 18.16.2.1 HRPWM Duty Control with SFO
        2. 18.16.2.2 HRPWM Slider
        3. 18.16.2.3 HRPWM Period Control
        4. 18.16.2.4 HRPWM Duty Control with UPDOWN Mode
    17. 18.17 ePWM Registers
      1. 18.17.1 ePWM Base Address Table
      2. 18.17.2 EPWM_REGS Registers
      3. 18.17.3 SYNC_SOC_REGS Registers
      4. 18.17.4 Register to Driverlib Function Mapping
        1. 18.17.4.1 EPWM Registers to Driverlib Functions
        2. 18.17.4.2 HRPWM Registers to Driverlib Functions
  21. 19Enhanced Capture (eCAP)
    1. 19.1 Introduction
      1. 19.1.1 Features
      2. 19.1.2 ECAP Related Collateral
    2. 19.2 Description
    3. 19.3 Configuring Device Pins for the eCAP
    4. 19.4 Capture and APWM Operating Mode
    5. 19.5 Capture Mode Description
      1. 19.5.1  Event Prescaler
      2. 19.5.2  Edge Polarity Select and Qualifier
      3. 19.5.3  Continuous/One-Shot Control
      4. 19.5.4  32-Bit Counter and Phase Control
      5. 19.5.5  CAP1-CAP4 Registers
      6. 19.5.6  eCAP Synchronization
        1. 19.5.6.1 Example 1 - Using SWSYNC with ECAP Module
      7. 19.5.7  Interrupt Control
      8. 19.5.8  DMA Interrupt
      9. 19.5.9  Shadow Load and Lockout Control
      10. 19.5.10 APWM Mode Operation
    6. 19.6 Application of the eCAP Module
      1. 19.6.1 Example 1 - Absolute Time-Stamp Operation Rising-Edge Trigger
      2. 19.6.2 Example 2 - Absolute Time-Stamp Operation Rising- and Falling-Edge Trigger
      3. 19.6.3 Example 3 - Time Difference (Delta) Operation Rising-Edge Trigger
      4. 19.6.4 Example 4 - Time Difference (Delta) Operation Rising- and Falling-Edge Trigger
    7. 19.7 Application of the APWM Mode
      1. 19.7.1 Example 1 - Simple PWM Generation (Independent Channels)
    8. 19.8 Software
      1. 19.8.1 ECAP Examples
        1. 19.8.1.1 eCAP APWM Example
        2. 19.8.1.2 eCAP Capture PWM Example
        3. 19.8.1.3 eCAP APWM Phase-shift Example
        4. 19.8.1.4 eCAP Software Sync Example
    9. 19.9 eCAP Registers
      1. 19.9.1 eCAP Base Address Table
      2. 19.9.2 ECAP_REGS Registers
      3. 19.9.3 ECAP Registers to Driverlib Functions
  22. 20High Resolution Capture (HRCAP)
    1. 20.1 Introduction
      1. 20.1.1 HRCAP Related Collateral
      2. 20.1.2 Features
      3. 20.1.3 Description
    2. 20.2 Operational Details
      1. 20.2.1 HRCAP Clocking
      2. 20.2.2 HRCAP Initialization Sequence
      3. 20.2.3 HRCAP Interrupts
      4. 20.2.4 HRCAP Calibration
        1. 20.2.4.1 Applying the Scale Factor
    3. 20.3 Known Exceptions
    4. 20.4 Software
      1. 20.4.1 HRCAP Examples
        1. 20.4.1.1 HRCAP Capture and Calibration Example
    5. 20.5 HRCAP Registers
      1. 20.5.1 HRCAP Base Address Table
      2. 20.5.2 HRCAP_REGS Registers
      3. 20.5.3 HRCAP Registers to Driverlib Functions
  23. 21Enhanced Quadrature Encoder Pulse (eQEP)
    1. 21.1  Introduction
      1. 21.1.1 EQEP Related Collateral
    2. 21.2  Configuring Device Pins
    3. 21.3  Description
      1. 21.3.1 EQEP Inputs
      2. 21.3.2 Functional Description
      3. 21.3.3 eQEP Memory Map
    4. 21.4  Quadrature Decoder Unit (QDU)
      1. 21.4.1 Position Counter Input Modes
        1. 21.4.1.1 Quadrature Count Mode
        2. 21.4.1.2 Direction-Count Mode
        3. 21.4.1.3 Up-Count Mode
        4. 21.4.1.4 Down-Count Mode
      2. 21.4.2 eQEP Input Polarity Selection
      3. 21.4.3 Position-Compare Sync Output
    5. 21.5  Position Counter and Control Unit (PCCU)
      1. 21.5.1 Position Counter Operating Modes
        1. 21.5.1.1 Position Counter Reset on Index Event (QEPCTL[PCRM]=00)
        2. 21.5.1.2 Position Counter Reset on Maximum Position (QEPCTL[PCRM]=01)
        3. 21.5.1.3 Position Counter Reset on the First Index Event (QEPCTL[PCRM] = 10)
        4. 21.5.1.4 Position Counter Reset on Unit Time-out Event (QEPCTL[PCRM] = 11)
      2. 21.5.2 Position Counter Latch
        1. 21.5.2.1 Index Event Latch
        2. 21.5.2.2 Strobe Event Latch
      3. 21.5.3 Position Counter Initialization
      4. 21.5.4 eQEP Position-compare Unit
    6. 21.6  eQEP Edge Capture Unit
    7. 21.7  eQEP Watchdog
    8. 21.8  eQEP Unit Timer Base
    9. 21.9  QMA Module
      1. 21.9.1 Modes of Operation
        1. 21.9.1.1 QMA Mode-1 (QMACTRL[MODE]=1)
        2. 21.9.1.2 QMA Mode-2 (QMACTRL[MODE]=2)
      2. 21.9.2 Interrupt and Error Generation
    10. 21.10 eQEP Interrupt Structure
    11. 21.11 eQEP Registers
      1. 21.11.1 eQEP Base Address Table
      2. 21.11.2 EQEP_REGS Registers
      3. 21.11.3 EQEP Registers to Driverlib Functions
  24. 22Serial Peripheral Interface (SPI)
    1. 22.1 Introduction
      1. 22.1.1 Features
      2. 22.1.2 SPI Related Collateral
      3. 22.1.3 Block Diagram
    2. 22.2 System-Level Integration
      1. 22.2.1 SPI Module Signals
      2. 22.2.2 Configuring Device Pins
        1. 22.2.2.1 GPIOs Required for High-Speed Mode
      3. 22.2.3 SPI Interrupts
      4. 22.2.4 DMA Support
    3. 22.3 SPI Operation
      1. 22.3.1  Introduction to Operation
      2. 22.3.2  Master Mode
      3. 22.3.3  Slave Mode
      4. 22.3.4  Data Format
        1. 22.3.4.1 Transmission of Bit from SPIRXBUF
      5. 22.3.5  Baud Rate Selection
        1. 22.3.5.1 Baud Rate Determination
        2. 22.3.5.2 Baud Rate Calculation in Non-High Speed Mode (HS_MODE = 0)
      6. 22.3.6  SPI Clocking Schemes
      7. 22.3.7  SPI FIFO Description
      8. 22.3.8  SPI DMA Transfers
        1. 22.3.8.1 Transmitting Data Using SPI with DMA
        2. 22.3.8.2 Receiving Data Using SPI with DMA
      9. 22.3.9  SPI High-Speed Mode
      10. 22.3.10 SPI 3-Wire Mode Description
    4. 22.4 Programming Procedure
      1. 22.4.1 Initialization Upon Reset
      2. 22.4.2 Configuring the SPI
      3. 22.4.3 Configuring the SPI for High-Speed Mode
      4. 22.4.4 Data Transfer Example
      5. 22.4.5 SPI 3-Wire Mode Code Examples
        1. 22.4.5.1 3-Wire Master Mode Transmit
        2.       1002
          1. 22.4.5.2.1 3-Wire Master Mode Receive
        3.       1004
          1. 22.4.5.2.1 3-Wire Slave Mode Transmit
        4.       1006
          1. 22.4.5.2.1 3-Wire Slave Mode Receive
      6. 22.4.6 SPI STEINV Bit in Digital Audio Transfers
    5. 22.5 Software
      1. 22.5.1 SPI Examples
        1. 22.5.1.1 SPI Digital Loopback
        2. 22.5.1.2 SPI Digital Loopback with FIFO Interrupts
        3. 22.5.1.3 SPI Digital External Loopback without FIFO Interrupts
        4. 22.5.1.4 SPI Digital External Loopback with FIFO Interrupts
        5. 22.5.1.5 SPI Digital Loopback with DMA
        6. 22.5.1.6 SPI EEPROM
        7. 22.5.1.7 SPI DMA EEPROM
    6. 22.6 SPI Registers
      1. 22.6.1 SPI Base Address Table
      2. 22.6.2 SPI_REGS Registers
      3. 22.6.3 SPI Registers to Driverlib Functions
  25. 23Serial Communications Interface (SCI)
    1. 23.1  Introduction
      1. 23.1.1 Features
      2. 23.1.2 SCI Related Collateral
      3. 23.1.3 Block Diagram
    2. 23.2  Architecture
    3. 23.3  SCI Module Signal Summary
    4. 23.4  Configuring Device Pins
    5. 23.5  Multiprocessor and Asynchronous Communication Modes
    6. 23.6  SCI Programmable Data Format
    7. 23.7  SCI Multiprocessor Communication
      1. 23.7.1 Recognizing the Address Byte
      2. 23.7.2 Controlling the SCI TX and RX Features
      3. 23.7.3 Receipt Sequence
    8. 23.8  Idle-Line Multiprocessor Mode
      1. 23.8.1 Idle-Line Mode Steps
      2. 23.8.2 Block Start Signal
      3. 23.8.3 Wake-Up Temporary (WUT) Flag
        1. 23.8.3.1 Sending a Block Start Signal
      4. 23.8.4 Receiver Operation
    9. 23.9  Address-Bit Multiprocessor Mode
      1. 23.9.1 Sending an Address
    10. 23.10 SCI Communication Format
      1. 23.10.1 Receiver Signals in Communication Modes
      2. 23.10.2 Transmitter Signals in Communication Modes
    11. 23.11 SCI Port Interrupts
      1. 23.11.1 Break Detect
    12. 23.12 SCI Baud Rate Calculations
    13. 23.13 SCI Enhanced Features
      1. 23.13.1 SCI FIFO Description
      2. 23.13.2 SCI Auto-Baud
      3. 23.13.3 Autobaud-Detect Sequence
    14. 23.14 Software
      1. 23.14.1 SCI Examples
        1. 23.14.1.1 Tune Baud Rate via UART Example
        2. 23.14.1.2 SCI FIFO Digital Loop Back
        3. 23.14.1.3 SCI Interrupt Echoback
        4. 23.14.1.4 SCI Interrupt Echoback with FIFO
        5. 23.14.1.5 SCI Echoback
    15. 23.15 SCI Registers
      1. 23.15.1 SCI Base Address Table
      2. 23.15.2 SCI_REGS Registers
      3. 23.15.3 SCI Registers to Driverlib Functions
  26. 24Inter-Integrated Circuit Module (I2C)
    1. 24.1 Introduction
      1. 24.1.1 I2C Related Collateral
      2. 24.1.2 Features
      3. 24.1.3 Features Not Supported
      4. 24.1.4 Functional Overview
      5. 24.1.5 Clock Generation
      6. 24.1.6 I2C Clock Divider Registers (I2CCLKL and I2CCLKH)
        1. 24.1.6.1 Formula for the Master Clock Period
    2. 24.2 Configuring Device Pins
    3. 24.3 I2C Module Operational Details
      1. 24.3.1  Input and Output Voltage Levels
      2. 24.3.2  Selecting Pullup Resistors
      3. 24.3.3  Data Validity
      4. 24.3.4  Operating Modes
      5. 24.3.5  I2C Module START and STOP Conditions
      6. 24.3.6  Non-repeat Mode versus Repeat Mode
      7. 24.3.7  Serial Data Formats
        1. 24.3.7.1 7-Bit Addressing Format
        2. 24.3.7.2 10-Bit Addressing Format
        3. 24.3.7.3 Free Data Format
        4. 24.3.7.4 Using a Repeated START Condition
      8. 24.3.8  Clock Synchronization
      9. 24.3.9  Arbitration
      10. 24.3.10 Digital Loopback Mode
      11. 24.3.11 NACK Bit Generation
    4. 24.4 Interrupt Requests Generated by the I2C Module
      1. 24.4.1 Basic I2C Interrupt Requests
      2. 24.4.2 I2C FIFO Interrupts
    5. 24.5 Resetting or Disabling the I2C Module
    6. 24.6 Software
      1. 24.6.1 I2C Examples
        1. 24.6.1.1 I2C Digital Loopback with FIFO Interrupts
        2. 24.6.1.2 I2C EEPROM
        3. 24.6.1.3 I2C EEPROM
        4. 24.6.1.4 I2C EEPROM
    7. 24.7 I2C Registers
      1. 24.7.1 I2C Base Address Table
      2. 24.7.2 I2C_REGS Registers
      3. 24.7.3 I2C Registers to Driverlib Functions
  27. 25Power Management Bus Module (PMBus)
    1. 25.1 Introduction
      1. 25.1.1 PMBUS Related Collateral
      2. 25.1.2 Features
      3. 25.1.3 Block Diagram
    2. 25.2 Configuring Device Pins
    3. 25.3 Slave Mode Operation
      1. 25.3.1 Configuration
      2. 25.3.2 Message Handling
        1. 25.3.2.1  Quick Command
        2. 25.3.2.2  Send Byte
        3. 25.3.2.3  Receive Byte
        4. 25.3.2.4  Write Byte and Write Word
        5. 25.3.2.5  Read Byte and Read Word
        6. 25.3.2.6  Process Call
        7. 25.3.2.7  Block Write
        8. 25.3.2.8  Block Read
        9. 25.3.2.9  Block Write-Block Read Process Call
        10. 25.3.2.10 Alert Response
        11. 25.3.2.11 Extended Command
        12. 25.3.2.12 Group Command
    4. 25.4 Master Mode Operation
      1. 25.4.1 Configuration
      2. 25.4.2 Message Handling
        1. 25.4.2.1  Quick Command
        2. 25.4.2.2  Send Byte
        3. 25.4.2.3  Receive Byte
        4. 25.4.2.4  Write Byte and Write Word
        5. 25.4.2.5  Read Byte and Read Word
        6. 25.4.2.6  Process Call
        7. 25.4.2.7  Block Write
        8. 25.4.2.8  Block Read
        9. 25.4.2.9  Block Write-Block Read Process Call
        10. 25.4.2.10 Alert Response
        11. 25.4.2.11 Extended Command
        12. 25.4.2.12 Group Command
    5. 25.5 PMBus Registers
      1. 25.5.1 PMBus Base Address Table
      2. 25.5.2 PMBUS_REGS Registers
      3. 25.5.3 PMBUS Registers to Driverlib Functions
  28. 26Controller Area Network (CAN)
    1. 26.1  Introduction
      1. 26.1.1 DCAN Related Collateral
      2. 26.1.2 Features
      3. 26.1.3 Block Diagram
        1. 26.1.3.1 CAN Core
        2. 26.1.3.2 Message Handler
        3. 26.1.3.3 Message RAM
        4. 26.1.3.4 Registers and Message Object Access (IFx)
    2. 26.2  Functional Description
      1. 26.2.1 Configuring Device Pins
      2. 26.2.2 Address/Data Bus Bridge
    3. 26.3  Operating Modes
      1. 26.3.1 Initialization
      2. 26.3.2 CAN Message Transfer (Normal Operation)
        1. 26.3.2.1 Disabled Automatic Retransmission
        2. 26.3.2.2 Auto-Bus-On
      3. 26.3.3 Test Modes
        1. 26.3.3.1 Silent Mode
        2. 26.3.3.2 Loopback Mode
        3. 26.3.3.3 External Loopback Mode
        4. 26.3.3.4 Loopback Combined with Silent Mode
    4. 26.4  Multiple Clock Source
    5. 26.5  Interrupt Functionality
      1. 26.5.1 Message Object Interrupts
      2. 26.5.2 Status Change Interrupts
      3. 26.5.3 Error Interrupts
      4. 26.5.4 Peripheral Interrupt Expansion (PIE) Module Nomenclature for DCAN Interrupts
      5. 26.5.5 Interrupt Topologies
    6. 26.6  DMA Functionality
    7. 26.7  Parity Check Mechanism
      1. 26.7.1 Behavior on Parity Error
    8. 26.8  Debug Mode
    9. 26.9  Module Initialization
    10. 26.10 Configuration of Message Objects
      1. 26.10.1 Configuration of a Transmit Object for Data Frames
      2. 26.10.2 Configuration of a Transmit Object for Remote Frames
      3. 26.10.3 Configuration of a Single Receive Object for Data Frames
      4. 26.10.4 Configuration of a Single Receive Object for Remote Frames
      5. 26.10.5 Configuration of a FIFO Buffer
    11. 26.11 Message Handling
      1. 26.11.1  Message Handler Overview
      2. 26.11.2  Receive/Transmit Priority
      3. 26.11.3  Transmission of Messages in Event Driven CAN Communication
      4. 26.11.4  Updating a Transmit Object
      5. 26.11.5  Changing a Transmit Object
      6. 26.11.6  Acceptance Filtering of Received Messages
      7. 26.11.7  Reception of Data Frames
      8. 26.11.8  Reception of Remote Frames
      9. 26.11.9  Reading Received Messages
      10. 26.11.10 Requesting New Data for a Receive Object
      11. 26.11.11 Storing Received Messages in FIFO Buffers
      12. 26.11.12 Reading from a FIFO Buffer
    12. 26.12 CAN Bit Timing
      1. 26.12.1 Bit Time and Bit Rate
        1. 26.12.1.1 Synchronization Segment
        2. 26.12.1.2 Propagation Time Segment
        3. 26.12.1.3 Phase Buffer Segments and Synchronization
        4. 26.12.1.4 Oscillator Tolerance Range
      2. 26.12.2 Configuration of the CAN Bit Timing
        1. 26.12.2.1 Calculation of the Bit Timing Parameters
        2. 26.12.2.2 Example for Bit Timing at High Baudrate
        3. 26.12.2.3 Example for Bit Timing at Low Baudrate
    13. 26.13 Message Interface Register Sets
      1. 26.13.1 Message Interface Register Sets 1 and 2 (IF1 and IF2)
      2. 26.13.2 Message Interface Register Set 3 (IF3)
    14. 26.14 Message RAM
      1. 26.14.1 Structure of Message Objects
      2. 26.14.2 Addressing Message Objects in RAM
      3. 26.14.3 Message RAM Representation in Debug Mode
    15. 26.15 Software
      1. 26.15.1 CAN Examples
        1. 26.15.1.1 CAN External Loopback
        2. 26.15.1.2 CAN External Loopback with Interrupts
        3. 26.15.1.3 CAN-A to CAN-B External Transmit
        4. 26.15.1.4 CAN External Loopback with DMA
        5. 26.15.1.5 CAN Transmit and Receive Configurations
        6. 26.15.1.6 CAN Error Generation Example
        7. 26.15.1.7 CAN Remote Request Loopback
        8. 26.15.1.8 CAN example that illustrates the usage of Mask registers
    16. 26.16 CAN Registers
      1. 26.16.1 CAN Base Address Table
      2. 26.16.2 CAN_REGS Registers
      3. 26.16.3 CAN Registers to Driverlib Functions
  29. 27Local Interconnect Network (LIN)
    1. 27.1 Introduction
      1. 27.1.1 SCI Features
      2. 27.1.2 LIN Features
      3. 27.1.3 LIN Related Collateral
      4. 27.1.4 Block Diagram
    2. 27.2 Serial Communications Interface Module
      1. 27.2.1 SCI Communication Formats
        1. 27.2.1.1 SCI Frame Formats
        2. 27.2.1.2 SCI Asynchronous Timing Mode
        3. 27.2.1.3 SCI Baud Rate
          1. 27.2.1.3.1 Superfractional Divider, SCI Asynchronous Mode
        4. 27.2.1.4 SCI Multiprocessor Communication Modes
          1. 27.2.1.4.1 Idle-Line Multiprocessor Modes
          2. 27.2.1.4.2 Address-Bit Multiprocessor Mode
        5. 27.2.1.5 SCI Multibuffered Mode
      2. 27.2.2 SCI Interrupts
        1. 27.2.2.1 Transmit Interrupt
        2. 27.2.2.2 Receive Interrupt
        3. 27.2.2.3 WakeUp Interrupt
        4. 27.2.2.4 Error Interrupts
      3. 27.2.3 SCI DMA Interface
        1. 27.2.3.1 Receive DMA Requests
        2. 27.2.3.2 Transmit DMA Requests
      4. 27.2.4 SCI Configurations
        1. 27.2.4.1 Receiving Data
          1. 27.2.4.1.1 Receiving Data in Single-Buffer Mode
          2. 27.2.4.1.2 Receiving Data in Multibuffer Mode
        2. 27.2.4.2 Transmitting Data
          1. 27.2.4.2.1 Transmitting Data in Single-Buffer Mode
          2. 27.2.4.2.2 Transmitting Data in Multibuffer Mode
      5. 27.2.5 SCI Low-Power Mode
        1. 27.2.5.1 Sleep Mode for Multiprocessor Communication
    3. 27.3 Local Interconnect Network Module
      1. 27.3.1 LIN Communication Formats
        1. 27.3.1.1  LIN Standards
        2. 27.3.1.2  Message Frame
          1. 27.3.1.2.1 Message Header
          2. 27.3.1.2.2 Response
        3. 27.3.1.3  Synchronizer
        4. 27.3.1.4  Baud Rate
          1. 27.3.1.4.1 Fractional Divider
          2. 27.3.1.4.2 Superfractional Divider
            1. 27.3.1.4.2.1 Superfractional Divider In LIN Mode
        5. 27.3.1.5  Header Generation
          1. 27.3.1.5.1 Event Triggered Frame Handling
          2. 27.3.1.5.2 Header Reception and Adaptive Baud Rate
        6. 27.3.1.6  Extended Frames Handling
        7. 27.3.1.7  Timeout Control
          1. 27.3.1.7.1 No-Response Error (NRE)
          2. 27.3.1.7.2 Bus Idle Detection
          3. 27.3.1.7.3 Timeout After Wakeup Signal and Timeout After Three Wakeup Signals
        8. 27.3.1.8  TXRX Error Detector (TED)
          1. 27.3.1.8.1 Bit Errors
          2. 27.3.1.8.2 Physical Bus Errors
          3. 27.3.1.8.3 ID Parity Errors
          4. 27.3.1.8.4 Checksum Errors
        9. 27.3.1.9  Message Filtering and Validation
        10. 27.3.1.10 Receive Buffers
        11. 27.3.1.11 Transmit Buffers
      2. 27.3.2 LIN Interrupts
      3. 27.3.3 Servicing LIN Interrupts
      4. 27.3.4 LIN DMA Interface
        1. 27.3.4.1 LIN Receive DMA Requests
        2. 27.3.4.2 LIN Transmit DMA Requests
      5. 27.3.5 LIN Configurations
        1. 27.3.5.1 Receiving Data
          1. 27.3.5.1.1 Receiving Data in Single-Buffer Mode
          2. 27.3.5.1.2 Receiving Data in Multibuffer Mode
        2. 27.3.5.2 Transmitting Data
          1. 27.3.5.2.1 Transmitting Data in Single-Buffer Mode
          2. 27.3.5.2.2 Transmitting Data in Multibuffer Mode
    4. 27.4 Low-Power Mode
      1. 27.4.1 Entering Sleep Mode
      2. 27.4.2 Wakeup
      3. 27.4.3 Wakeup Timeouts
    5. 27.5 Emulation Mode
    6. 27.6 Software
      1. 27.6.1 LIN Examples
        1. 27.6.1.1 LIN Internal Loopback with Interrupts
        2. 27.6.1.2 LIN SCI Mode Internal Loopback with Interrupts
        3. 27.6.1.3 LIN SCI MODE Internal Loopback with DMA
        4. 27.6.1.4 LIN Internal Loopback without interrupts(polled mode)
        5. 27.6.1.5 LIN SCI MODE (Single Buffer) Internal Loopback with DMA
    7. 27.7 SCI/LIN Registers
      1. 27.7.1 LIN Base Address Table
      2. 27.7.2 LIN_REGS Registers
      3. 27.7.3 LIN Registers to Driverlib Functions
  30. 28Fast Serial Interface (FSI)
    1. 28.1 Introduction
      1. 28.1.1 FSI Related Collateral
      2. 28.1.2 FSI Features
    2. 28.2 System-level Integration
      1. 28.2.1 CPU Interface
      2. 28.2.2 Signal Description
        1. 28.2.2.1 Configuring Device Pins
      3. 28.2.3 FSI Interrupts
        1. 28.2.3.1 Transmitter Interrupts
        2. 28.2.3.2 Receiver Interrupts
        3. 28.2.3.3 Configuring Interrupts
        4. 28.2.3.4 Handling Interrupts
      4. 28.2.4 CLA Task Triggering
      5. 28.2.5 DMA Interface
      6. 28.2.6 External Frame Trigger Mux
    3. 28.3 FSI Functional Description
      1. 28.3.1  Introduction to Operation
      2. 28.3.2  FSI Transmitter Module
        1. 28.3.2.1 Initialization
        2. 28.3.2.2 FSI_TX Clocking
        3. 28.3.2.3 Transmitting Frames
          1. 28.3.2.3.1 Software Triggered Frames
          2. 28.3.2.3.2 Externally Triggered Frames
          3. 28.3.2.3.3 Ping Frame Generation
            1. 28.3.2.3.3.1 Automatic Ping Frames
            2. 28.3.2.3.3.2 Software Triggered Ping Frame
            3. 28.3.2.3.3.3 Externally Triggered Ping Frame
          4. 28.3.2.3.4 Transmitting Frames with DMA
        4. 28.3.2.4 Transmit Buffer Management
        5. 28.3.2.5 CRC Submodule
        6. 28.3.2.6 Conditions in Which the Transmitter Must Undergo a Soft Reset
        7. 28.3.2.7 Reset
      3. 28.3.3  FSI Receiver Module
        1. 28.3.3.1  Initialization
        2. 28.3.3.2  FSI_RX Clocking
        3. 28.3.3.3  Receiving Frames
          1. 28.3.3.3.1 Receiving Frames with DMA
        4. 28.3.3.4  Ping Frame Watchdog
        5. 28.3.3.5  Frame Watchdog
        6. 28.3.3.6  Delay Line Control
        7. 28.3.3.7  Buffer Management
        8. 28.3.3.8  CRC Submodule
        9. 28.3.3.9  Using the Zero Bits of the Receiver Tag Registers
        10. 28.3.3.10 Conditions in Which the Receiver Must Undergo a Soft Reset
        11. 28.3.3.11 FSI_RX Reset
      4. 28.3.4  Frame Format
        1. 28.3.4.1 FSI Frame Phases
        2. 28.3.4.2 Frame Types
          1. 28.3.4.2.1 Ping Frames
          2. 28.3.4.2.2 Error Frames
          3. 28.3.4.2.3 Data Frames
        3. 28.3.4.3 Multi-Lane Transmission
      5. 28.3.5  Flush Sequence
      6. 28.3.6  Internal Loopback
      7. 28.3.7  CRC Generation
      8. 28.3.8  ECC Module
      9. 28.3.9  FSI Trigger Generation
      10. 28.3.10 FSI-SPI Compatibility Mode
        1. 28.3.10.1 Available SPI Modes
          1. 28.3.10.1.1 FSITX as SPI Master, Transmit Only
            1. 28.3.10.1.1.1 Initialization
            2. 28.3.10.1.1.2 Operation
          2. 28.3.10.1.2 FSIRX as SPI Slave, Receive Only
            1. 28.3.10.1.2.1 Initialization
            2. 28.3.10.1.2.2 Operation
          3. 28.3.10.1.3 FSITX and FSIRX Emulating a Full Duplex SPI Master
            1. 28.3.10.1.3.1 Initialization
            2. 28.3.10.1.3.2 Operation
    4. 28.4 FSI Programing Guide
      1. 28.4.1 Establishing the Communication Link
        1. 28.4.1.1 Establishing the Communication Link from the Master Device
        2. 28.4.1.2 Establishing the Communication Link from the Slave Device
      2. 28.4.2 Register Protection
      3. 28.4.3 Emulation Mode
    5. 28.5 Software
      1. 28.5.1 FSI Examples
        1. 28.5.1.1  FSI Loopback:CPU Control
        2. 28.5.1.2  FSI Loopback CLA control
        3. 28.5.1.3  FSI DMA frame transfers:DMA Control
        4. 28.5.1.4  FSI data transfer by external trigger
        5. 28.5.1.5  FSI data transfers upon CPU Timer event
        6. 28.5.1.6  FSI and SPI communication(fsi_ex6_spi_main_tx)
        7. 28.5.1.7  FSI and SPI communication(fsi_ex7_spi_remote_rx)
        8. 28.5.1.8  FSI P2Point Connection:Rx Side
        9. 28.5.1.9  FSI P2Point Connection:Tx Side
        10. 28.5.1.10 FSI and SPI communication (fsi_ex9_spi_master_tx_drivers)
        11. 28.5.1.11 FSI and SPI communication (fsi_ex10_spi_slave_rx_driver)
        12. 28.5.1.12 FSI and SPI communication full-duplex
        13. 28.5.1.13 FSI Receive Skew Compensation Block Element Delays
        14. 28.5.1.14 FSI Skew Calibration in Single Data Line Mode (RX Device)
        15. 28.5.1.15 FSI Skew Calibration in Single Data Line Mode (TX Device)
        16. 28.5.1.16 FSI Skew Calibration in Dual Data Line Mode (RX Device)
        17. 28.5.1.17 FSI Skew Calibration in Dual Data Line Mode (TX Device)
        18. 28.5.1.18 FSI Find Optimal Number of Delay Elements Activated For FSIRX
        19. 28.5.1.19 FSI Find Optimal Number of Delay Elements Activated For FSIRX
        20. 28.5.1.20 FSI daisy chain topology, lead device example
        21. 28.5.1.21 FSI daisy chain topology, node device example
    6. 28.6 FSI Registers
      1. 28.6.1 FSI Base Address Table
      2. 28.6.2 FSI_TX_REGS Registers
      3. 28.6.3 FSI_RX_REGS Registers
      4. 28.6.4 FSI Registers to Driverlib Functions
  31. 29Configurable Logic Block (CLB)
    1. 29.1 Introduction
      1. 29.1.1 CLB Related Collateral
    2. 29.2 Description
      1. 29.2.1 CLB Clock
    3. 29.3 CLB Input/Output Connection
      1. 29.3.1 Overview
      2. 29.3.2 CLB Input Selection
      3. 29.3.3 CLB Output Selection
      4. 29.3.4 CLB Output Signal Multiplexer
    4. 29.4 CLB Tile
      1. 29.4.1 Static Switch Block
      2. 29.4.2 Counter Block
        1. 29.4.2.1 Counter Description
        2. 29.4.2.2 Counter Operation
        3. 29.4.2.3 Serializer Mode
        4. 29.4.2.4 Linear Feedback Shift Register (LFSR) Mode
      3. 29.4.3 FSM Block
      4. 29.4.4 LUT4 Block
      5. 29.4.5 Output LUT Block
      6. 29.4.6 Asynchronous Output Conditioning (AOC) Block
      7. 29.4.7 High Level Controller (HLC)
        1. 29.4.7.1 High Level Controller Events
        2. 29.4.7.2 High Level Controller Instructions
        3. 29.4.7.3 <Src> and <Dest>
        4. 29.4.7.4 Operation of the PUSH and PULL Instructions (Overflow and Underflow Detection)
    5. 29.5 CPU Interface
      1. 29.5.1 Register Description
      2. 29.5.2 Non-Memory Mapped Registers
    6. 29.6 DMA Access
    7. 29.7 Software
      1. 29.7.1 CLB Examples
        1. 29.7.1.1  CLB Empty Project
        2. 29.7.1.2  CLB Combinational Logic
        3. 29.7.1.3  CLB GPIO Input Filter
        4. 29.7.1.4  CLB Auxilary PWM
        5. 29.7.1.5  CLB PWM Protection
        6. 29.7.1.6  CLB Event Window
        7. 29.7.1.7  CLB Signal Generator
        8. 29.7.1.8  CLB State Machine
        9. 29.7.1.9  CLB External Signal AND Gate
        10. 29.7.1.10 CLB Timer
        11. 29.7.1.11 CLB Timer Two States
        12. 29.7.1.12 CLB Interrupt Tag
        13. 29.7.1.13 CLB Output Intersect
        14. 29.7.1.14 CLB PUSH PULL
        15. 29.7.1.15 CLB Multi Tile
        16. 29.7.1.16 CLB Glue Logic
        17. 29.7.1.17 CLB based One-shot PWM
        18. 29.7.1.18 CLB AOC Control
        19. 29.7.1.19 CLB AOC Release Control
        20. 29.7.1.20 CLB AOC Control
        21. 29.7.1.21 CLB Serializer
        22. 29.7.1.22 CLB LFSR
        23. 29.7.1.23 CLB Trip Zone Timestamp
        24. 29.7.1.24 CLB CRC
    8. 29.8 CLB Registers
      1. 29.8.1 CLB Base Addresses
      2. 29.8.2 CLB_LOGIC_CONFIG_REGS Registers
      3. 29.8.3 CLB_LOGIC_CONTROL_REGS Registers
      4. 29.8.4 CLB_DATA_EXCHANGE_REGS Registers
      5. 29.8.5 CLB Registers to Driverlib Functions
  32. 30Revision History

9.3.5 CLB_XBAR_REGS Registers

Table 9-63 lists the memory-mapped registers for the CLB_XBAR_REGS registers. All register offset addresses not listed in Table 9-63 should be considered as reserved locations and the register contents should not be modified.

Table 9-63 CLB_XBAR_REGS Registers
OffsetAcronymRegister NameWrite ProtectionSection
0hAUXSIG0MUX0TO15CFGCLB XBAR Mux Configuration for Output-0EALLOWGo
2hAUXSIG0MUX16TO31CFGCLB XBAR Mux Configuration for Output-0EALLOWGo
4hAUXSIG1MUX0TO15CFGCLB XBAR Mux Configuration for Output-1EALLOWGo
6hAUXSIG1MUX16TO31CFGCLB XBAR Mux Configuration for Output-1EALLOWGo
8hAUXSIG2MUX0TO15CFGCLB XBAR Mux Configuration for Output-2EALLOWGo
AhAUXSIG2MUX16TO31CFGCLB XBAR Mux Configuration for Output-2EALLOWGo
ChAUXSIG3MUX0TO15CFGCLB XBAR Mux Configuration for Output-3EALLOWGo
EhAUXSIG3MUX16TO31CFGCLB XBAR Mux Configuration for Output-3EALLOWGo
10hAUXSIG4MUX0TO15CFGCLB XBAR Mux Configuration for Output-4EALLOWGo
12hAUXSIG4MUX16TO31CFGCLB XBAR Mux Configuration for Output-4EALLOWGo
14hAUXSIG5MUX0TO15CFGCLB XBAR Mux Configuration for Output-5EALLOWGo
16hAUXSIG5MUX16TO31CFGCLB XBAR Mux Configuration for Output-5EALLOWGo
18hAUXSIG6MUX0TO15CFGCLB XBAR Mux Configuration for Output-6EALLOWGo
1AhAUXSIG6MUX16TO31CFGCLB XBAR Mux Configuration for Output-6EALLOWGo
1ChAUXSIG7MUX0TO15CFGCLB XBAR Mux Configuration for Output-7EALLOWGo
1EhAUXSIG7MUX16TO31CFGCLB XBAR Mux Configuration for Output-7EALLOWGo
20hAUXSIG0MUXENABLECLB XBAR Mux Enable Register for Output-0EALLOWGo
22hAUXSIG1MUXENABLECLB XBAR Mux Enable Register for Output-1EALLOWGo
24hAUXSIG2MUXENABLECLB XBAR Mux Enable Register for Output-2EALLOWGo
26hAUXSIG3MUXENABLECLB XBAR Mux Enable Register for Output-3EALLOWGo
28hAUXSIG4MUXENABLECLB XBAR Mux Enable Register for Output-4EALLOWGo
2AhAUXSIG5MUXENABLECLB XBAR Mux Enable Register for Output-5EALLOWGo
2ChAUXSIG6MUXENABLECLB XBAR Mux Enable Register for Output-6EALLOWGo
2EhAUXSIG7MUXENABLECLB XBAR Mux Enable Register for Output-7EALLOWGo
38hAUXSIGOUTINVCLB XBAR Output Inversion RegisterEALLOWGo
3EhAUXSIGLOCKClbXbar Configuration Lock registerEALLOWGo

Complex bit access types are encoded to fit into small table cells. Table 9-64 shows the codes that are used for access types in this section.

Table 9-64 CLB_XBAR_REGS Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
R-0R
-0		Read
Returns 0s
Write Type
WWWrite
WSonceW
Sonce		Write
Set once
Reset or Default Value
-nValue after reset or the default value
Register Array Variables
i,j,k,l,m,nWhen these variables are used in a register name, an offset, or an address, they refer to the value of a register array where the register is part of a group of repeating registers. The register groups form a hierarchical structure and the array is represented with a formula.
yWhen this variable is used in a register name, an offset, or an address it refers to the value of a register array.

9.3.5.1 AUXSIG0MUX0TO15CFG Register (Offset = 0h) [Reset = 00000000h]

AUXSIG0MUX0TO15CFG is shown in Figure 9-58 and described in Table 9-65.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-0

Figure 9-58 AUXSIG0MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-65 AUXSIG0MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.2 AUXSIG0MUX16TO31CFG Register (Offset = 2h) [Reset = 00000000h]

AUXSIG0MUX16TO31CFG is shown in Figure 9-59 and described in Table 9-66.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-0

Figure 9-59 AUXSIG0MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-66 AUXSIG0MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG0 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.3 AUXSIG1MUX0TO15CFG Register (Offset = 4h) [Reset = 00000000h]

AUXSIG1MUX0TO15CFG is shown in Figure 9-60 and described in Table 9-67.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-1

Figure 9-60 AUXSIG1MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-67 AUXSIG1MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.4 AUXSIG1MUX16TO31CFG Register (Offset = 6h) [Reset = 00000000h]

AUXSIG1MUX16TO31CFG is shown in Figure 9-61 and described in Table 9-68.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-1

Figure 9-61 AUXSIG1MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-68 AUXSIG1MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG1 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.5 AUXSIG2MUX0TO15CFG Register (Offset = 8h) [Reset = 00000000h]

AUXSIG2MUX0TO15CFG is shown in Figure 9-62 and described in Table 9-69.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-2

Figure 9-62 AUXSIG2MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-69 AUXSIG2MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.6 AUXSIG2MUX16TO31CFG Register (Offset = Ah) [Reset = 00000000h]

AUXSIG2MUX16TO31CFG is shown in Figure 9-63 and described in Table 9-70.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-2

Figure 9-63 AUXSIG2MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-70 AUXSIG2MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG2 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.7 AUXSIG3MUX0TO15CFG Register (Offset = Ch) [Reset = 00000000h]

AUXSIG3MUX0TO15CFG is shown in Figure 9-64 and described in Table 9-71.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-3

Figure 9-64 AUXSIG3MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-71 AUXSIG3MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.8 AUXSIG3MUX16TO31CFG Register (Offset = Eh) [Reset = 00000000h]

AUXSIG3MUX16TO31CFG is shown in Figure 9-65 and described in Table 9-72.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-3

Figure 9-65 AUXSIG3MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-72 AUXSIG3MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG3 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.9 AUXSIG4MUX0TO15CFG Register (Offset = 10h) [Reset = 00000000h]

AUXSIG4MUX0TO15CFG is shown in Figure 9-66 and described in Table 9-73.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-4

Figure 9-66 AUXSIG4MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-73 AUXSIG4MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.10 AUXSIG4MUX16TO31CFG Register (Offset = 12h) [Reset = 00000000h]

AUXSIG4MUX16TO31CFG is shown in Figure 9-67 and described in Table 9-74.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-4

Figure 9-67 AUXSIG4MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-74 AUXSIG4MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG4 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.11 AUXSIG5MUX0TO15CFG Register (Offset = 14h) [Reset = 00000000h]

AUXSIG5MUX0TO15CFG is shown in Figure 9-68 and described in Table 9-75.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-5

Figure 9-68 AUXSIG5MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-75 AUXSIG5MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.12 AUXSIG5MUX16TO31CFG Register (Offset = 16h) [Reset = 00000000h]

AUXSIG5MUX16TO31CFG is shown in Figure 9-69 and described in Table 9-76.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-5

Figure 9-69 AUXSIG5MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-76 AUXSIG5MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG5 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.13 AUXSIG6MUX0TO15CFG Register (Offset = 18h) [Reset = 00000000h]

AUXSIG6MUX0TO15CFG is shown in Figure 9-70 and described in Table 9-77.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-6

Figure 9-70 AUXSIG6MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-77 AUXSIG6MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.14 AUXSIG6MUX16TO31CFG Register (Offset = 1Ah) [Reset = 00000000h]

AUXSIG6MUX16TO31CFG is shown in Figure 9-71 and described in Table 9-78.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-6

Figure 9-71 AUXSIG6MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-78 AUXSIG6MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG6 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.15 AUXSIG7MUX0TO15CFG Register (Offset = 1Ch) [Reset = 00000000h]

AUXSIG7MUX0TO15CFG is shown in Figure 9-72 and described in Table 9-79.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-7

Figure 9-72 AUXSIG7MUX0TO15CFG Register
31302928272625242322212019181716
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-79 AUXSIG7MUX0TO15CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX15R/W0hGroup Select Bits for MUX15: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX15
01 : Select .1 input for MUX15
10 : Select .2 input for MUX15
11 : Select .3 input for MUX15

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX14R/W0hGroup Select Bits for MUX14: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX14
01 : Select .1 input for MUX14
10 : Select .2 input for MUX14
11 : Select .3 input for MUX14

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX13R/W0hGroup Select Bits for MUX13: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX13
01 : Select .1 input for MUX13
10 : Select .2 input for MUX13
11 : Select .3 input for MUX13

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX12R/W0hGroup Select Bits for MUX12: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX12
01 : Select .1 input for MUX12
10 : Select .2 input for MUX12
11 : Select .3 input for MUX12

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX11R/W0hGroup Select Bits for MUX11: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX11
01 : Select .1 input for MUX11
10 : Select .2 input for MUX11
11 : Select .3 input for MUX11

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX10R/W0hGroup Select Bits for MUX10: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX10
01 : Select .1 input for MUX10
10 : Select .2 input for MUX10
11 : Select .3 input for MUX10

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX9R/W0hGroup Select Bits for MUX9: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX9
01 : Select .1 input for MUX9
10 : Select .2 input for MUX9
11 : Select .3 input for MUX9

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX8R/W0hGroup Select Bits for MUX8: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX8
01 : Select .1 input for MUX8
10 : Select .2 input for MUX8
11 : Select .3 input for MUX8

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX7R/W0hGroup Select Bits for MUX7: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX7
01 : Select .1 input for MUX7
10 : Select .2 input for MUX7
11 : Select .3 input for MUX7

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX6R/W0hGroup Select Bits for MUX6: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX6
01 : Select .1 input for MUX6
10 : Select .2 input for MUX6
11 : Select .3 input for MUX6

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX5R/W0hGroup Select Bits for MUX5: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX5
01 : Select .1 input for MUX5
10 : Select .2 input for MUX5
11 : Select .3 input for MUX5

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX4R/W0hGroup Select Bits for MUX4: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX4
01 : Select .1 input for MUX4
10 : Select .2 input for MUX4
11 : Select .3 input for MUX4

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX3R/W0hGroup Select Bits for MUX3: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX3
01 : Select .1 input for MUX3
10 : Select .2 input for MUX3
11 : Select .3 input for MUX3

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX2R/W0hGroup Select Bits for MUX2: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX2
01 : Select .1 input for MUX2
10 : Select .2 input for MUX2
11 : Select .3 input for MUX2

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX1R/W0hGroup Select Bits for MUX1: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX1
01 : Select .1 input for MUX1
10 : Select .2 input for MUX1
11 : Select .3 input for MUX1

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX0R/W0hGroup Select Bits for MUX0: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX0
01 : Select .1 input for MUX0
10 : Select .2 input for MUX0
11 : Select .3 input for MUX0

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.16 AUXSIG7MUX16TO31CFG Register (Offset = 1Eh) [Reset = 00000000h]

AUXSIG7MUX16TO31CFG is shown in Figure 9-73 and described in Table 9-80.

Return to the Summary Table.

CLB XBAR Mux Configuration for Output-7

Figure 9-73 AUXSIG7MUX16TO31CFG Register
31302928272625242322212019181716
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
1514131211109876543210
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-80 AUXSIG7MUX16TO31CFG Register Field Descriptions
BitFieldTypeResetDescription
31-30MUX31R/W0hGroup Select Bits for MUX31: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX31
01 : Select .1 input for MUX31
10 : Select .2 input for MUX31
11 : Select .3 input for MUX31

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29-28MUX30R/W0hGroup Select Bits for MUX30: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX30
01 : Select .1 input for MUX30
10 : Select .2 input for MUX30
11 : Select .3 input for MUX30

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27-26MUX29R/W0hGroup Select Bits for MUX29: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX29
01 : Select .1 input for MUX29
10 : Select .2 input for MUX29
11 : Select .3 input for MUX29

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25-24MUX28R/W0hGroup Select Bits for MUX28: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX28
01 : Select .1 input for MUX28
10 : Select .2 input for MUX28
11 : Select .3 input for MUX28

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23-22MUX27R/W0hGroup Select Bits for MUX27: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX27
01 : Select .1 input for MUX27
10 : Select .2 input for MUX27
11 : Select .3 input for MUX27

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21-20MUX26R/W0hGroup Select Bits for MUX26: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX26
01 : Select .1 input for MUX26
10 : Select .2 input for MUX26
11 : Select .3 input for MUX26

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19-18MUX25R/W0hGroup Select Bits for MUX25: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX25
01 : Select .1 input for MUX25
10 : Select .2 input for MUX25
11 : Select .3 input for MUX25

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17-16MUX24R/W0hGroup Select Bits for MUX24: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX24
01 : Select .1 input for MUX24
10 : Select .2 input for MUX24
11 : Select .3 input for MUX24

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15-14MUX23R/W0hGroup Select Bits for MUX23: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX23
01 : Select .1 input for MUX23
10 : Select .2 input for MUX23
11 : Select .3 input for MUX23

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13-12MUX22R/W0hGroup Select Bits for MUX22: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX22
01 : Select .1 input for MUX22
10 : Select .2 input for MUX22
11 : Select .3 input for MUX22

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11-10MUX21R/W0hGroup Select Bits for MUX21: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX21
01 : Select .1 input for MUX21
10 : Select .2 input for MUX21
11 : Select .3 input for MUX21

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9-8MUX20R/W0hGroup Select Bits for MUX20: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX20
01 : Select .1 input for MUX20
10 : Select .2 input for MUX20
11 : Select .3 input for MUX20

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7-6MUX19R/W0hGroup Select Bits for MUX19: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX19
01 : Select .1 input for MUX19
10 : Select .2 input for MUX19
11 : Select .3 input for MUX19

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5-4MUX18R/W0hGroup Select Bits for MUX18: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX18
01 : Select .1 input for MUX18
10 : Select .2 input for MUX18
11 : Select .3 input for MUX18

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3-2MUX17R/W0hGroup Select Bits for MUX17: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX17
01 : Select .1 input for MUX17
10 : Select .2 input for MUX17
11 : Select .3 input for MUX17

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1-0MUX16R/W0hGroup Select Bits for MUX16: Selects 4X1 group output for AUXSIG7 of CLB-XBAR

00 : Select .0 input for MUX16
01 : Select .1 input for MUX16
10 : Select .2 input for MUX16
11 : Select .3 input for MUX16

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.17 AUXSIG0MUXENABLE Register (Offset = 20h) [Reset = 00000000h]

AUXSIG0MUXENABLE is shown in Figure 9-74 and described in Table 9-81.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-0

Figure 9-74 AUXSIG0MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-81 AUXSIG0MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG0 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG0 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG0 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.18 AUXSIG1MUXENABLE Register (Offset = 22h) [Reset = 00000000h]

AUXSIG1MUXENABLE is shown in Figure 9-75 and described in Table 9-82.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-1

Figure 9-75 AUXSIG1MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-82 AUXSIG1MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG1 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG1 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG1 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.19 AUXSIG2MUXENABLE Register (Offset = 24h) [Reset = 00000000h]

AUXSIG2MUXENABLE is shown in Figure 9-76 and described in Table 9-83.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-2

Figure 9-76 AUXSIG2MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-83 AUXSIG2MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG2 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG2 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG2 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.20 AUXSIG3MUXENABLE Register (Offset = 26h) [Reset = 00000000h]

AUXSIG3MUXENABLE is shown in Figure 9-77 and described in Table 9-84.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-3

Figure 9-77 AUXSIG3MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-84 AUXSIG3MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG3 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG3 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG3 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.21 AUXSIG4MUXENABLE Register (Offset = 28h) [Reset = 00000000h]

AUXSIG4MUXENABLE is shown in Figure 9-78 and described in Table 9-85.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-4

Figure 9-78 AUXSIG4MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-85 AUXSIG4MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG4 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG4 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG4 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.22 AUXSIG5MUXENABLE Register (Offset = 2Ah) [Reset = 00000000h]

AUXSIG5MUXENABLE is shown in Figure 9-79 and described in Table 9-86.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-5

Figure 9-79 AUXSIG5MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-86 AUXSIG5MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG5 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG5 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG5 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.23 AUXSIG6MUXENABLE Register (Offset = 2Ch) [Reset = 00000000h]

AUXSIG6MUXENABLE is shown in Figure 9-80 and described in Table 9-87.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-6

Figure 9-80 AUXSIG6MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-87 AUXSIG6MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG6 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG6 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG6 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.24 AUXSIG7MUXENABLE Register (Offset = 2Eh) [Reset = 00000000h]

AUXSIG7MUXENABLE is shown in Figure 9-81 and described in Table 9-88.

Return to the Summary Table.

CLB XBAR Mux Enable Register for Output-7

Figure 9-81 AUXSIG7MUXENABLE Register
3130292827262524
MUX31MUX30MUX29MUX28MUX27MUX26MUX25MUX24
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
2322212019181716
MUX23MUX22MUX21MUX20MUX19MUX18MUX17MUX16
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
15141312111098
MUX15MUX14MUX13MUX12MUX11MUX10MUX9MUX8
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
76543210
MUX7MUX6MUX5MUX4MUX3MUX2MUX1MUX0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-88 AUXSIG7MUXENABLE Register Field Descriptions
BitFieldTypeResetDescription
31MUX31R/W0hSelects the output of MUX31 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX31 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX31 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

30MUX30R/W0hSelects the output of MUX30 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX30 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX30 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

29MUX29R/W0hSelects the output of MUX29 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX29 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX29 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

28MUX28R/W0hSelects the output of MUX28 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX28 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX28 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

27MUX27R/W0hSelects the output of MUX27 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX27 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX27 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

26MUX26R/W0hSelects the output of MUX26 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX26 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX26 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

25MUX25R/W0hSelects the output of MUX25 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX25 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX25 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

24MUX24R/W0hSelects the output of MUX24 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX24 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX24 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

23MUX23R/W0hSelects the output of MUX23 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX23 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX23 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

22MUX22R/W0hSelects the output of MUX22 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX22 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX22 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

21MUX21R/W0hSelects the output of MUX21 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX21 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX21 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

20MUX20R/W0hSelects the output of MUX20 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX20 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX20 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

19MUX19R/W0hSelects the output of MUX19 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX19 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX19 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

18MUX18R/W0hSelects the output of MUX18 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX18 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX18 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

17MUX17R/W0hSelects the output of MUX17 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX17 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX17 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

16MUX16R/W0hSelects the output of MUX16 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX16 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX16 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

15MUX15R/W0hSelects the output of MUX15 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX15 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX15 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

14MUX14R/W0hSelects the output of MUX14 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX14 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX14 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

13MUX13R/W0hSelects the output of MUX13 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX13 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX13 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

12MUX12R/W0hSelects the output of MUX12 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX12 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX12 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

11MUX11R/W0hSelects the output of MUX11 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX11 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX11 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

10MUX10R/W0hSelects the output of MUX10 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX10 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX10 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9MUX9R/W0hSelects the output of MUX9 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX9 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX9 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

8MUX8R/W0hSelects the output of MUX8 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX8 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX8 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

7MUX7R/W0hSelects the output of MUX7 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX7 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX7 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6MUX6R/W0hSelects the output of MUX6 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX6 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX6 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5MUX5R/W0hSelects the output of MUX5 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX5 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX5 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4MUX4R/W0hSelects the output of MUX4 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX4 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX4 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3MUX3R/W0hSelects the output of MUX3 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX3 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX3 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2MUX2R/W0hSelects the output of MUX2 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX2 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX2 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1MUX1R/W0hSelects the output of MUX1 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX1 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX1 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0MUX0R/W0hSelects the output of mux0 to drive AUXSIG7 of CLB-XBAR

0: Respective output of MUX0 is disabled to drive the AUXSIG7 of CLB-XBAR
1: Respective output of MUX0 is enabled to drive the AUXSIG7 of CLB-XBAR

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.25 AUXSIGOUTINV Register (Offset = 38h) [Reset = 00000000h]

AUXSIGOUTINV is shown in Figure 9-82 and described in Table 9-89.

Return to the Summary Table.

CLB XBAR Output Inversion Register

Figure 9-82 AUXSIGOUTINV Register
3130292827262524
RESERVED
R-0-0h
2322212019181716
RESERVED
R-0-0h
15141312111098
RESERVED
R-0-0h
76543210
OUT7OUT6OUT5OUT4OUT3OUT2OUT1OUT0
R/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0hR/W-0h
Table 9-89 AUXSIGOUTINV Register Field Descriptions
BitFieldTypeResetDescription
31-16RESERVEDR-00hReserved
15-8RESERVEDR-00hReserved
7OUT7R/W0hSelects polarity for AUXSIG7 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

6OUT6R/W0hSelects polarity for AUXSIG6 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

5OUT5R/W0hSelects polarity for AUXSIG5 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

4OUT4R/W0hSelects polarity for AUXSIG4 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

3OUT3R/W0hSelects polarity for AUXSIG3 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

2OUT2R/W0hSelects polarity for AUXSIG2 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

1OUT1R/W0hSelects polarity for AUXSIG1 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

0OUT0R/W0hSelects polarity for AUXSIG0 of CLB-XBAR

0: drives active high output
1: drives active-low output

Refer to the CLB X-BAR section of this chapter for more details.

Reset type: CPU1.SYSRSn

9.3.5.26 AUXSIGLOCK Register (Offset = 3Eh) [Reset = 00000000h]

AUXSIGLOCK is shown in Figure 9-83 and described in Table 9-90.

Return to the Summary Table.

ClbXbar Configuration Lock register

Figure 9-83 AUXSIGLOCK Register
3130292827262524
KEY
R-0/W-0h
2322212019181716
KEY
R-0/W-0h
15141312111098
RESERVED
R-0-0h
76543210
RESERVEDLOCK
R-0-0hR/WSonce-0h
Table 9-90 AUXSIGLOCK Register Field Descriptions
BitFieldTypeResetDescription
31-16KEYR-0/W0hBit-0 of this register can be set only if KEY= 0x5a5a

Reset type: CPU1.SYSRSn

15-1RESERVEDR-00hReserved
0LOCKR/WSonce0hLocks the configuration for CLB-XBAR. Once the configuration is locked, writes to the below registers for CLB-XBAR is blocked.

Registers Affected by the LOCK mechanism:
CLB-XBAROUTyMUX0TO15CFG
CLB-XBAROUTyMUX16TO31CFG
CLB-XBAROUTyMUXENABLE
CLB-XBAROUTLATEN
CLB-XBAROUTINV

0: Writes to the above registers are allowed
1: Writes to the above registers are blocked

Note:
[1] LOCK mechanism only apples to writes. Reads are never blocked.

Reset type: CPU1.SYSRSn