The controlCARD can be completely powered and
operated from the USB-C connector. In this stand-alone mode, the on-board isolated
power supply provides power to the F28P65x device; no additional hardware is
required. Optionally, an external 5V supply can be provided to power the F28P65x
device. For a detailed explanation of the hardware configuration, see Section 4.3.
WARNING: When the controlCARD is used in
a high-voltage setup, the user is responsible to confirm that the voltages and
isolation requirements are identified and understood prior to energizing the board
or simulation. When energized, the controlCARD or components connected to the
controlCARD cannot be touched. Furthermore, the capacitor C34 must be removed to
minimize the possibility of leakage current flowing across the isolation barrier of
the controlCARD.