SWRA750
September 2022
Introduction
Trademarks
1
Connectionless RF Tests
1.1
Continuous TX
1.2
Tester Packet TX RX
1.3
Continuous RX
1.4
BER Meter Test
1.4.1
BER Test - Between Two WiLink Devices
1.4.2
BER Test - Between WiLink (RX) and Litepoint iQ2010 (TX)
2
Bluetooth SIG RF Test Mode
3
Bluetooth Low Energy Testing
4
Connection Test
5
Conversion of HCI Commands to SS1Tool or hcitool Format
5.1
Examples of SS1Tool or Enhanced Bluetopia PM Test Format Conversion
5.1.1
Connectionless RF Tests
5.1.1.1
Continuous TX
5.1.1.2
Packet TX RX
5.1.1.3
Continuous RX
5.1.1.4
RX BER Meter Test
5.1.2
Bluetooth SIG RF Test Mode
5.1.3
Bluetooth Low Energy Testing
6
Revision History
1.2
Tester Packet TX RX
Opcode
0xFDCC
ACL TX Packet Type
0x0 - DM1
0x1 - DH1
0x2 - DM3
0x3 - DH3
0x4 - DM5
0x5 - DH5
0x6 - 2-DH1
0x7 - 2-DH3
0x8 - 2-DH5
0x9 - 3-DH1
0xA - 3-DH3
0xB - 3-DH5
Frequency Mode
0x00 - Hopping
0x03 - Single Frequency
Tx Single Frequency
2402 ~ 2480
0xFFFF - No Tx
Rx Single Frequency
2402 ~ 2480
0xFFFF - No Rx
Test pattern
0x0= All 0
0x1= All 1
0x2= ZOZO (0101)
0x3= FOFO (11110000)
0x4= Ordered
0x5= PRBS9 Random
Extended features
0 - disabled
1 - Enabled
Packet data length
0-17 -> DM1, 0-27 -> DH1, 0-121 -> DM3, 0-183 -> DH3, 0-224 -> DM5, 0-339 -> DH5
Power Level
0-7 where 0 is the lowest and 7 is the highest
Diable Whitning
0x1 - Disabled
0x0 - Enabled
PRBS9 Init Value
0x01FF