SWRA770 august   2023 CC2564C

1.   1
2.   Abstract
3.   Trademarks
4. 1Demo Overview
5. 2Running the Bluetooth Code
6. 3Demo Application
   1. 3.1 Device 1 (Host/HID Host) Setup on the Demo Application
   2. 3.2 Device 2 (Client/HID Device Setup on the Demo Application
   3. 3.3 Initiating Connection from the HID Host
   4. 3.4 Initiating Connection from HID Device
   5. 3.5 Communication Between Host and Device
7. 4Application Commands
8. 5Gap Commands
   1. 5.1  Help (DisplayHelp)
   2. 5.2  Inquiry
   3. 5.3  Display Inquiry List
   4. 5.4  Pair
   5. 5.5  End Pairing
   6. 5.6  PIN Code Response
   7. 5.7  Pass Key Response
   8. 5.8  User Confirmation Response
   9. 5.9  Set Discoverability Mode
   10. 5.10 Set Connectability Mode
   11. 5.11 Set Pairability Mode
   12. 5.12 Change Simple Pairing Parameters
   13. 5.13 Get Local Address
   14. 5.14 Set Local Name
   15. 5.15 Get Local Name
   16. 5.16 Set Class of Device
   17. 5.17 Get Class of Device
   18. 5.18 Get Remote Name
9. 6Human Interface Demo Profile
   1. 6.1 Host
      1. 6.1.1  Connect Remote HID Device
      2. 6.1.2  Close Connection
      3. 6.1.3  Control Request
      4. 6.1.4  Get Report Request
      5. 6.1.5  Set Report Request
      6. 6.1.6  Get Protocol Request
      7. 6.1.7  Set Protocol Request
      8. 6.1.8  Get Idle Request
      9. 6.1.9  Set Idle Request
      10. 6.1.10 Data Write
   2. 6.2 Client
      1. 6.2.1 Get Report Response
      2. 6.2.2 Set Report Response
      3. 6.2.3 Get Protocol Response
      4. 6.2.4 Set Protocol Response
      5. 6.2.5 Get Idle Response
      6. 6.2.6 Set Idle Response
10. 7References
11. 8Revision History