SWRS183B June   2016  – July 2018 CC1350

PRODUCTION DATA.  

  1. 1Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2Revision History
  3. 3Device Comparison
    1. 3.1 Related Products
  4. 4Terminal Configuration and Functions
    1. 4.1 Pin Diagram – RSM Package
    2. 4.2 Signal Descriptions – RSM Package
    3. 4.3 Pin Diagram – RHB Package
    4. 4.4 Signal Descriptions – RHB Package
    5. 4.5 Pin Diagram – RGZ Package
    6. 4.6 Signal Descriptions – RGZ Package
  5. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Power Consumption Summary
    5. 5.5  RF Characteristics
    6. 5.6  Receive (RX) Parameters, 861 MHz to 1054 MHz
    7. 5.7  Receive (RX) Parameters, 431 MHz to 527 MHz
    8. 5.8  Transmit (TX) Parameters, 861 MHz to 1054 MHz
    9. 5.9  Transmit (TX) Parameters, 431 MHz to 527 MHz
    10. 5.10 1-Mbps GFSK (Bluetooth low energy) – RX
    11. 5.11 1-Mbps GFSK (Bluetooth low energy) – TX
    12. 5.12 PLL Parameters
    13. 5.13 ADC Characteristics
    14. 5.14 Temperature Sensor
    15. 5.15 Battery Monitor
    16. 5.16 Continuous Time Comparator
    17. 5.17 Low-Power Clocked Comparator
    18. 5.18 Programmable Current Source
    19. 5.19 DC Characteristics
    20. 5.20 Thermal Characteristics
    21. 5.21 Timing and Switching Characteristics
      1. 5.21.1 Reset Timing
        1. Table 5-1 Reset Timing
      2. 5.21.2 Wakeup Timing
        1. Table 5-2 Wakeup Timing
      3. 5.21.3 Clock Specifications
        1. Table 5-3 24-MHz Crystal Oscillator (XOSC_HF)
        2. Table 5-4 32.768-kHz Crystal Oscillator (XOSC_LF)
        3. Table 5-5 48-MHz RC Oscillator (RCOSC_HF)
        4. Table 5-6 32-kHz RC Oscillator (RCOSC_LF)
      4. 5.21.4 Flash Memory Characteristics
        1. Table 5-7 Flash Memory Characteristics
      5. 5.21.5 Synchronous Serial Interface (SSI) Characteristics
        1. Table 5-8 Synchronous Serial Interface (SSI) Characteristics
    22. 5.22 Typical Characteristics
    23. 5.23 Typical Characteristics – Sub-1 GHz
    24. 5.24 Typical Characteristics – 2.4 GHz
  6. 6Detailed Description
    1. 6.1  Overview
    2. 6.2  Main CPU
    3. 6.3  RF Core
    4. 6.4  Sensor Controller
    5. 6.5  Memory
    6. 6.6  Debug
    7. 6.7  Power Management
    8. 6.8  Clock Systems
    9. 6.9  General Peripherals and Modules
    10. 6.10 Voltage Supply Domains
    11. 6.11 System Architecture
  7. 7Application, Implementation, and Layout
    1. 7.1 Application Information
    2. 7.2 TI Design or Reference Design
  8. 8Device and Documentation Support
    1. 8.1  Device Nomenclature
    2. 8.2  Tools and Software
    3. 8.3  Documentation Support
    4. 8.4  Texas Instruments Low-Power RF Website
    5. 8.5  Additional Information
    6. 8.6  Community Resources
    7. 8.7  Trademarks
    8. 8.8  Electrostatic Discharge Caution
    9. 8.9  Export Control Notice
    10. 8.10 Glossary
  9. 9Mechanical, Packaging, and Orderable Information
    1. 9.1 Packaging Information

5.6 Receive (RX) Parameters, 861 MHz to 1054 MHz

Measured on the Texas Instruments CC1310EM-7XD-7793 reference design with Tc = 25°C, VDDS = 3.0 V, DC/DC enabled, fRF = 868 MHz, unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX path.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Data rate Up to 4 Mbps bps
Data rate offset tolerance,
IEEE 802.15.4g PHY		 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–3 1600 ppm
Data rate step size 1.5 bps
Digital channel filter programmable bandwidth Using VCO divide by 5 setting 40 4000 kHz
Receiver sensitivity, 50 kbps 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2. 868 MHz and 915 MHz –110 dBm
Receiver saturation 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 10 dBm
Selectivity, ±200 kHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 44, 47 dB
Selectivity, ±400 kHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 48, 53 dB
Blocking ±1 MHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 59, 62 dB
Blocking ±2 MHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 64, 65 dB
Blocking ±5 MHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 67, 68 dB
Blocking ±10 MHz, 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 76, 76 dB
Spurious emissions 1 GHz to 13 GHz
(VCO leakage at 3.5 GHz) and
30 MHz to 1 GHz 		Conducted emissions measured according to
ETSI EN 300 220		 –70 dBm
Image rejection (image compensation enabled, the image compensation is calibrated in production), 50 kbps Wanted signal 3 dB above sensitivity limit. 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode), BER = 10–2 44 dB
RSSI dynamic range 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode). Starting from the sensitivity limit. This range will give an accuracy of ±2 dB. 95 dB
RSSI accuracy 50 kbps, GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same modulation format as IEEE 802.15.4g mandatory mode). Starting from the sensitivity limit across the given dynamic range. ±2 dB
Receiver sensitivity, 500 kbps GFSK, 175-kHz deviation, 1.243‐MHz RX bandwidth,
BER = 10–2 		–97 dBm
Blocking, ±2 MHz, 500 kbps Wanted signal 3 dB above sensitivity limit. 500 kbps, GFSK, 175-kHz deviation, 1.243‐MHz RX bandwidth,
BER = 10–2 		35, 36 dB
Blocking, ±10 MHz, 500 kbps Wanted signal 3 dB above sensitivity limit. 500 kbps, GFSK, 175-kHz deviation, 1.243‐MHz RX bandwidth,
BER = 10–2 		55, 47 dB
Receiver sensitivity, long‐range mode, 5 kbps 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate),
DSSS = 2, 49‐kHz RX bandwidth, BER = 10–2.
868 MHz and 915 MHz 		–119 dBm
Receiver sensitivity, long‐range mode, 2.5 kbps 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate),
DSSS = 4, 49‐kHz RX bandwidth, BER = 10–2.
868 MHz and 915 MHz		 –120 dBm
Receiver sensitivity, long‐range mode, 1.25 kbps 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate),
DSSS = 8, 49‐kHz RX bandwidth, BER = 10–2.
868 MHz and 915 MHz		 –121 dBm
Selectivity, ±100 kHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		47, 47 dB
Selectivity, ±200 kHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		54, 55 dB
Selectivity, ±300 kHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		57, 56 dB
Blocking, ±1 MHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		68, 67 dB
Blocking, ±2 MHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		74, 74 dB
Blocking, ±10 MHz, long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		85, 85 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), long‐range mode, 5 kbps Wanted signal 3 dB above sensitivity limit. 20 ksym/s, GFSK, 5‐kHz deviation, FEC (half rate), DSSS = 2,
49‐kHz RX bandwidth, BER = 10–2 		52 dB
Receiver sensitivity, wM‐BUS S2‐mode, 32.768 kbps fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		–111 dBm
Selectivity, ±200 kHz, wM‐BUS
S2‐mode, 32.768 kbps		 Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		42, 43 dB
Selectivity, ±400 kHz, wM‐BUS
S2‐mode, 32.768 kbps		 Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		41, 47 dB
Blocking, ±1 MHz, wM‐BUS S2‐mode, 32.768 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		43, 52 dB
Blocking, ±2 MHz, wM‐BUS S2‐mode, 32.768 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		52, 55 dB
Blocking, ±10 MHz, wM‐BUS S2‐mode, 32.768 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		68, 72 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), wM‐BUS
S2‐mode, 32.768 kbps		 Wanted signal 3 dB above sensitivity limit.
fRF = 868.3 MHz, 32.768 ksym/s, Manchester coding, FSK, 50‐kHz deviation, 196‐kHz RX bandwidth,
BER = 10–2 		43 dB
Receiver sensitivity, wM‐BUS C‐mode, 100 kbps fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		–107 dBm
Selectivity, ±400 kHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		41, 46 dB
Selectivity, ±800 kHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		41, 50 dB
Blocking, ±1 MHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		43, 51 dB
Blocking, ±2 MHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		51, 53 dB
Blocking, ±5 MHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		55, 61 dB
Blocking, ±10 MHz, wM‐BUS C‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, NRZ coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		67, 68 dB
Receiver sensitivity, wM‐BUS T‐mode, 100 kbps fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		–105 dBm
Selectivity, ±400 kHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		41, 46 dB
Selectivity, ±800 kHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		41, 50 dB
Blocking, ±1 MHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		42, 51 dB
Blocking, ±2 MHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		51, 52 dB
Blocking, ±5 MHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK, 45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		54, 60 dB
Blocking, ±10 MHz, wM‐BUS T‐mode, 100 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 868.95 MHz, 100 ksym/s, 3 out of 6 coding, FSK,
45‐kHz deviation, 196‐kHz RX bandwidth, BER = 10–2 		67, 68 dB
Receiver sensitivity, WideBand-DSSS (WB-DSSS), 30 kbps fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 8, 622-kHz RX bandwidth,
BER = 10–2 		–109 dBm
Blocking, ±1 MHz, WB-DSSS, 30 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 8, 622-kHz RX bandwidth,
BER = 10–2 		57, 57 dB
Blocking, ±2 MHz, WB-DSSS, 30 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 8, 622-kHz RX bandwidth,
BER = 10–2 		58, 58 dB
Blocking, ±5 MHz, WB-DSSS, 30 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 8, 622-kHz RX bandwidth,
BER = 10–2 		59, 57 dB
Blocking, ±10 MHz, WB-DSSS, 30 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 8, 622-kHz RX bandwidth,
BER = 10–2 		71, 68 dB
Receiver sensitivity, WideBand-DSSS (WB-DSSS), 60 kbps fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 4, 622-kHz RX bandwidth,
BER = 10–2 		–108 dBm
Blocking, ±1 MHz, WB-DSSS, 60 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 4, 622-kHz RX bandwidth,
BER = 10–2 		56, 56 dB
Blocking, ±2 MHz, WB-DSSS, 60 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 4, 622-kHz RX bandwidth,
BER = 10–2 		57, 57 dB
Blocking, ±5 MHz, WB-DSSS, 60 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 4, 622-kHz RX bandwidth,
BER = 10–2 		57, 56 dB
Blocking, ±10 MHz, WB-DSSS, 60 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 4, 622-kHz RX bandwidth,
BER = 10–2 		70, 67 dB
Receiver sensitivity, WideBand-DSSS (WB-DSSS), 120 kbps fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 2, 622-kHz RX bandwidth,
BER = 10–2 		–106 dBm
Blocking, ±1 MHz, WB-DSSS, 120 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 2, 622-kHz RX bandwidth,
BER = 10–2 		54, 54 dB
Blocking, ±2 MHz, WB-DSSS, 120 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 2, 622-kHz RX bandwidth,
BER = 10–2 		55, 55 dB
Blocking, ±5 MHz, WB-DSSS, 120 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 2, 622-kHz RX bandwidth,
BER = 10–2 		55, 54 dB
Blocking, ±10 MHz, WB-DSSS, 120 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 2, 622-kHz RX bandwidth,
BER = 10–2 		69, 65 dB
Receiver sensitivity, WideBand-DSSS (WB-DSSS), 240 kbps fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 1, 622-kHz RX bandwidth,
BER = 10–2 		–105 dBm
Blocking, ±1 MHz, WB-DSSS, 240 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 1, 622-kHz RX bandwidth,
BER = 10–2 		53, 53 dB
Blocking, ±2 MHz, WB-DSSS, 240 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 1, 622-kHz RX bandwidth,
BER = 10–2 		53, 54 dB
Blocking, ±5 MHz, WB-DSSS, 240 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 1, 622-kHz RX bandwidth,
BER = 10–2 		53, 54 dB
Blocking, ±10 MHz, WB-DSSS, 240 kbps Wanted signal 3 dB above sensitivity limit.
fRF = 915 MHz, 480 ksym/s, GFSK, 195-kHz deviation, FEC (half rate), DSSS = 1, 622-kHz RX bandwidth,
BER = 10–2 		68, 64 dB
Receiver sensitivity, 10 kbps GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		–114 dBm
Selectivity, ±100 kHz, 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		40, 40 dB
Selectivity, ±200 kHz, 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		46, 44 dB
Selectivity, ±400 kHz, 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		50, 45 dB
Blocking, ±2 MHz, 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		62, 61 dB
Blocking, ±10 MHz, 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		76, 72 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), 10 kbps Wanted signal 3 dB above sensitivity limit. 10 kbps, GFSK, 19-kHz deviation, 78‐kHz RX bandwidth,
BER = 10–2 		43 dB
Receiver sensitivity, 4.8 kbps GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		–114 dBm
Selectivity, ±100 kHz, 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		44, 43 dB
Selectivity, ±200 kHz, 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		49, 48 dB
Selectivity, ±400 kHz, 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		52, 49 dB
Blocking, ±2 MHz, 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		64, 63 dB
Blocking, ±10 MHz, 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		73, 72 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), 4.8 kbps Wanted signal 3 dB above sensitivity limit. 4.8 kbps, GFSK, 5.2-kHz deviation, 49‐kHz RX bandwidth,
BER = 10–2 		43 dB
Receiver sensitivity, CC1101 compatible mode, 2.4 kbps GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 –116 dBm
Selectivity, ±100 kHz, CC1101 compatible mode, 2.4 kbps Wanted signal 3 dB above sensitivity limit. 2.4 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 45, 44 dB
Selectivity, ±200 kHz, CC1101 compatible mode, 2.4 kbps Wanted signal 3 dB above sensitivity limit. 2.4 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 51, 47 dB
Blocking, ±2 MHz, CC1101 compatible mode, 2.4 kbps Wanted signal 3 dB above sensitivity limit. 2.4 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 63, 62 dB
Blocking, ±10 MHz, CC1101 compatible mode, 2.4 kbps Wanted signal 3 dB above sensitivity limit. 2.4 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 76, 71 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), CC1101 compatible mode, 2.4 kbps Wanted signal 3 dB above sensitivity limit. 2.4 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 45 dB
Receiver sensitivity, CC1101 compatible mode, 1.2 kbps GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 –117 dBm
Selectivity, ±100 kHz, CC1101 compatible mode, 1.2 kbps Wanted signal 3 dB above sensitivity limit. 1.2 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 45, 44 dB
Selectivity, ±200 kHz, CC1101 compatible mode, 1.2 kbps Wanted signal 3 dB above sensitivity limit. 1.2 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 51, 47 dB
Blocking, ±2 MHz, CC1101 compatible mode, 1.2 kbps Wanted signal 3 dB above sensitivity limit. 1.2 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 63, 62 dB
Blocking, ±10 MHz, CC1101 compatible mode, 1.2 kbps Wanted signal 3 dB above sensitivity limit. 1.2 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 81, 81 dB
Image rejection (image compensation enabled, the image compensation is calibrated in production), CC1101 compatible mode, 1.2 kbps Wanted signal 3 dB above sensitivity limit. 1.2 kbps, GFSK, 5.2-kHz deviation (commonly used settings on CC1101), 49‐kHz RX bandwidth, BER = 10–2 45 dB
Receiver sensitivity, legacy long-range mode, 625 bps 10 ksym/s, GFSK, 5-kHz deviation, FEC (half rate),
DSSS = 8, 40-kHz RX bandwidth, BER = 10–2.
868 MHz and 915 MHz.		 –124 dBm
Selectivity, ±100 kHz, legacy long-range mode, 625 bps Wanted signal 3 dB above sensitivity limit. 10 ksym/s, GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10–2 		56, 56 dB
Blocking ±1 MHz, legacy long-range mode, 625 bps Wanted signal 3 dB above sensitivity limit. 10 ksym/s, GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10–2 		73, 77 dB
Blocking ±2 MHz, legacy long-range mode, 625 bps Wanted signal 3 dB above sensitivity limit. 10 ksym/s, GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10–2 		79, 79 dB
Blocking ±10 MHz, legacy long-range mode, 625 bps Wanted signal 3 dB above sensitivity limit. 10 ksym/s, GFSK, 5-kHz deviation, FEC (half rate), DSSS = 8,
40-kHz RX bandwidth, BER = 10–2 		91, 91 dB
Receiver sensitivity, OOK, 4.8 kbps 4.8 kbps, OOK, 40-kHz RX bandwidth, BER = 10–2.
868 MHz and 915 MHz		 –115 dBm