The LAUNCHCC3235MOD SimpleLink LaunchPad includes the following features:
- CC3235MODSF, SimpleLinkTM Dual-Band Wi-Fi® module solution
- Integrated MCU
- 40.0-MHz crystal
- 32.768-kHz crystal (RTC)
- 32-Mbit SPI serial flash
- RF and full power-management components
- 40-pin LaunchPad kit standard that leverages the BoosterPack ecosystem
- TI standard, XDS110-based JTAG emulation with serial port for flash programming
- Supports 4-wire JTAG and 2-wire SWD
- Two buttons and one RGB LED for user interaction
- Back-channel universal asynchronous receiver/transmitter (UART) through USB to PC
- Onboard chip antenna with U.FL for conducted testing selectable using 0-Ω resistors
- Onboard accelerometer and temperature sensor for out-of-box demo with option to isolate the sensors from the inter-integrated circuit (I2C) bus
- Micro-USB connector for power and debug connections
- Headers for current measurement and external JTAG connection (option to use the onboard XDS110 to debug customer platforms)
- Bus-powered device with no external power required for Wi-Fi
- Long-range transmission with highly optimized antenna (200 m typical in open air using an access point with 6-dBi antenna AP)
- Can be powered externally, with two AA or two AAA alkaline batteries working down to 2.3-V typical
- Dimensions: 106.1 mm (L) × 58.42 mm (W)