SWRU630 December   2024

 

  1.   1
  2.   Description
  3.   Getting Started
  4.   Features
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Key Features
    3. 1.3 Kit Contents
    4. 1.4 Specification
    5. 1.5 Device Information
  6. 2Hardware
    1. 2.1  xWRL6844EVM Antenna
      1. 2.1.1 PCB Material
        1. 2.1.1.1 Transmitter and Receiver Virtual Array
    2. 2.2  EVM Mux Block Diagram
    3. 2.3  Switch Settings
    4. 2.4  Push Button Switches
    5. 2.5  LEDs
    6. 2.6  DC Input Jack
    7. 2.7  USB Connector
    8. 2.8  DCA1000 HD Connector
    9. 2.9  BoosterPack Connector for LaunchPad Connectivity
    10. 2.10 CAN-FD_B Connector
    11. 2.11 CAN-FD_A Connector
    12. 2.12 LIN-PHY Connector
    13. 2.13 I2C Connections
      1. 2.13.1 EEPROM
    14. 2.14 XDS110 Interface
    15. 2.15 FTDI Interface
    16. 2.16 DCA1000EVM Mode
    17. 2.17 PCB Storage and Handling Recommendations:
      1. 2.17.1 PCB Storage and Handling Recommendations
      2. 2.17.2 Higher Power Demanding Applications
  7. 3Software, Development Tools, and Example Code
  8. 4Hardware Design Files
    1. 4.1 Schematics, PCB Layout and Bill of Materials (BOM)
    2. 4.2 EVM Design Database
    3. 4.3 Hardware Design Checklist
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6References
    1. 6.1 TI E2E Community
  11. 7Revision History

2.9 BoosterPack Connector for LaunchPad Connectivity

J11/J2 are the booster pack connectors provided on the EVM. The user can populate the LP-BP connector to connect with other TI launchpad kits.

AWRL6844EVM IWRL6844EVM Booster Pack Connector Figure 2-17 Booster Pack Connector

The Figure 2-18 shows the various signals that have been brought-out on the LP-BP connector.

AWRL6844EVM IWRL6844EVM LP-BP connector Pins Figure 2-18 LP-BP connector Pins