TIDUF84 June   2024

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6.   6
  7. 1System Description
    1. 1.1 Key System Specifications
  8. 2System Overview
    1. 2.1 Block Diagram
    2. 2.2 Design Considerations
    3. 2.3 Highlighted Products
      1. 2.3.1 UCC28810
      2. 2.3.2 MCF8315
      3. 2.3.3 MSPM0L
      4. 2.3.4 MSPM0C
  9. 3System Design Theory
    1. 3.1 MCF8315 Design
      1. 3.1.1 Power section
      2. 3.1.2 GPIO section
    2. 3.2 ACDC Design: Single Stage PFC
    3. 3.3 Host MCU Design
  10. 4Hardware, Software, Testing Requirements, and Test Results
    1. 4.1 Hardware Requirements
      1. 4.1.1 Hardware Overview
      2. 4.1.2 TIDA-010951 PCB
    2. 4.2 Software Requirements
    3. 4.3 Testing requirements
    4. 4.4 Test Setup
    5. 4.5 Test Results
      1. 4.5.1 Power Management in TIDA-010951
      2. 4.5.2 UCC28810 Based Single Stage PFC
      3. 4.5.3 BLDC Residential Fan Operation Using MCF8315C
        1. 4.5.3.1 Power-Up Sequence
        2. 4.5.3.2 Forward Windmilling (ISD Forward Resync)
        3. 4.5.3.3 Reverse Windmilling (ISD Reverse Resync)
        4. 4.5.3.4 Direction Reversal
        5. 4.5.3.5 Fan Acceleration/Deceleration
      4. 4.5.4 Thermal Performance
  11. 5Design and Documentation Support
    1. 5.1 Design Files
      1. 5.1.1 Schematics
      2. 5.1.2 BOM
    2. 5.2 Tools and Software
    3. 5.3 Documentation Support
    4. 5.4 Support Resources
    5. 5.5 Trademarks
  12. 6About the Author
  13. 7Recognition

2.3.1 UCC28810

The UCC28810 are general lighting power controllers for low to medium power lumens applications requiring power factor correction and EMC compliance. UCC28810 is designed for controlling a flyback, buck or boost converter operating in critical conduction mode. UCC28810 features a trans-conductance voltage amplifier for feedback error processing, a simple current reference generator for generating a current command proportional to the input voltage, a current-sense (PWM) comparator, PWM logic and a totem-pole driver for driving an external FET.

In the critical conduction mode operation, the PWM circuit is self-oscillating with the turn-on being governed by a transformer zero energy detector (TZE pin) and the turn-off being governed by the current sense comparator. Additionally, the controller provides features such as peak current limit, restart timer, over-voltage protection (OVP), and enable.