AM263Px Control Card Quick Start Guide
Abstract
This application note is intended for first-time users of AM263Px Control Card EVM. The instructions walk through each step required to go from powering the EVM, setting up the environment, and building/running an example program.
Trademarks
Code Composer Studio are trademarks of Texas Instruments.
All trademarks are the property of their respective owners.
1 Control Card Overview
The AM263Px Control Card Evaluation Module (EVM) is an evaluation and development board for the Texas Instruments Sitara™ AM263Px series of microcontrollers (MCUs). This EVM provides an easy way to start developing on the AM263Px MCUs through a simple user interface consisting of buttons, LEDs, and on-board emulation for programming and debugging. Optionally, the control card can also enable header pin access to key signals through the use of a high speed edge connector (HSEC) baseboard docking station for rapid prototyping.
Figure 1-1 AM263Px Control Card Box Contents
To purchase the optional HSEC baseboard docking station: www.ti.com/tool/TMDSHSECDOCK
