Avi Yashar
You’ve probably heard that it’s possible to shatter glass by screaming at a high-pitched tone, but have you heard of cleaning glass by screaming? With precisely controlled, high-frequency vibrations, ultrasonic cleaning technology can clean glass surfaces. On a rainy day this technology could automatically detect and clear raindrops from a car’s rear camera lens without requiring action from the driver.
In this article, I’ll discuss ultrasonic lens cleaning or ULC technology and how it can help make self-cleaning camera applications a reality.
Let’s start with the physics. All objects have a natural frequency determined by their molecular structure and geometry. This is a unique frequency at which the object vibrates or oscillates after applying energy to it. For example, a guitar string vibrates at its natural frequency when strummed. Similarly, a wine glass vibrates at its natural frequency when struck. If you repeatedly apply energy to a material specifically at its natural frequency, the incoming waves will constructively interfere with the existing waves – making them more intense but still in the same phase. This phenomenon is known as resonance.
To better understand resonance, imagine that you’re pushing someone on a swing. Pushing at exactly the right moment when the swing is at the peak of the backswing will cause the person to swing higher. Conversely, if you push at the wrong time (for example, if you’re out of sync with the person swinging), you will absorb some of the mechanical energy into your arms and attenuate the height of the swing motion.
Glass, silicon and polycarbonate lenses all have natural frequencies depending on their shape and thickness. Applying an ultrasonic vibration (or vibration outside the human hearing range) at the natural frequency of these materials will cause them to resonate. Much like how screaming at the natural frequency of a glass object can cause it to resonate to the point of shattering, precisely applying ultrasonic vibration in special patterns using piezo transducers and advanced semiconductors can effectively blast off water, dirt and other contaminants from a surface. Figure 1 below shows a cross section of an ultrasonic lens cleaning system. Figure 2 subsequently shows an animation of an ultrasonic lens cleaning system expelling water. Although an ultrasonic lens cover would normally vibrate with approximately 10 micrometers of displacement, which is less than a human eye can perceive, the animation is exaggerated for demonstration purposes.
In 2014, the U.S. Department of Transportation mandated rear backup cameras for cars made after May 1, 2018. Today, some cars have as many as eight cameras and other exterior sensors using technologies such as lidar.
These cameras and sensors are only useful when their lenses are clear and unobstructed; a splash of mud or rain can easily disable autonomous features. So as automobiles become smarter, safer and more sophisticated, there will likely be new mandates for these sensors to operate in all weather conditions for applications such as autonomous emergency braking.
While ultrasonic cleaning already exists in the medical field using tubs of water, innovations in mechanical design, software algorithms and semiconductor integration have enabled ultrasonic surface cleaning in open air. Self-cleaning camera lens technology isn’t limited to the automotive industry, either; practically any application with cameras could leverage the technology, including traffic monitoring cameras, endoscopes, and machine vision cameras.
Automotive original equipment manufacturers have experimented with camera cleaning methods such as miniaturized windshield wipers, compressed air and spinning lenses. Unfortunately, these methods are overly complex, expensive and don’t work in all scenarios. Some high-end vehicles feature hidden water jets that wash their camera lenses, an approach that requires extra plumbing and additional fluid tank capacity. But water jets can’t clear ice, and don’t help when it’s raining.
Ultrasonic lens cleaning systems can use mechanical vibrations to rapidly generate heat, melt ice and blast away water. They can continuously clear rain from lenses by automatically sensing water and atomizing it through vibration. With the right algorithms and mechanical design, these systems can remove other containments such as dust, mud or even insects. This may sound complex, but application specific semiconductors could handle this task in a very small footprint. Using application-specific semiconductors such as the ULC1001, an automatic ultrasonic lens cleaning system could be self-contained, relying on nothing more than a power supply and an optional data line.
Given the need for safe and reliable cars, I expect the automotive industry to adopt ultrasonic lens cleaning; other types of end equipment, such as automated systems for agriculture, traffic cameras and sports filming, will also likely adopt this technology for its performance advantages, operational efficiency and streamlined maintenance. While ultrasonic lens cleaning isn’t quite the same as screaming, this technology is definitely worth a shout of excitement.
Learn more about ULC in the technical article, "Ultrasonic lens cleaning: A solid-state technology you didn't know you needed."
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2023, Texas Instruments Incorporated