SWRZ161 December 2024 CC2745P10-Q1 , CC2745R10-Q1
This document describes the known exceptions to functional specifications (advisories) of the CC274XX-Q1 SimpleLink™ device.
This document supports the following devices:
CC2744R74E0WRHARQ1
CC2745R74E0WRHARQ1
CC2745R10E0WRHARQ1
CC2745P10E0WRHARQ1
SimpleLink™ and Texas Instruments™ are trademarks of Texas Instruments.
All trademarks are the property of their respective owners.
Table 1-1 lists all advisories, modules affected, and the applicable silicon revisions.
MODULE | DESCRIPTION | SILICON REVISIONS AFFECTED |
---|---|---|
E |
||
ADC | Advisory ADC_08 — ADC BUSY bit not cleared in repeat single, sequence and repeat sequence conversion modes | Yes |
ADC |
Advisory ADC_09— ADC can have random conversion errors. |
Yes |
BATMON | Advisory BATMON_01 — Incorrect temperature measurement | Yes |
BATMON |
Advisory BATMON_02— Spurious temperature update interrupts from BATMON in standby | Yes |
SYS | Advisory SYS_204 — SysTimer may not always generate a compare event when previously programmed with a value | Yes |
SYS | Advisory SYS_206 — The RF phase jumps during HFXT amplitude compensation and HFXT amplitude control | Yes |
SYS | Advisory SYS_207 — Standby entry may not be gated if FLTSETTLED bit is read too soon | Yes |
APU | Advisory APU_201 — APU Data memory write operation fails | Yes |