TCAN844-Q1 Automotive Fault-Protected CAN FD Transceiver with Standby Mode

1 Features

AEC-Q100 Qualified for automotive applications
- Human body model (HBM) ESD protection: ±12KV for CANH and CANL pins as per
  AEC Q100-002
- Charged-device model (CDM) ESD protection: ±500V as per AEC Q100-011
- IEC 61000-4-2 Contact discharge: ±8KV (unpowered)
Compatible with ISO 11898-2:2024 physical layer standard
Functional Safety-Capable
- Documentation available to aid in functional safety system design
Support of classical CAN and optimized CAN FD performance at 2 and 5Mbps
- Short and symmetrical propagation delays for enhanced timing margin
TCAN844V-Q1 I/O voltage range supports 2.9V to 5.25V
Support for 12V battery applications
Receiver common mode input voltage: ±12V
Protection features:
- Bus fault protection: ±40V
- Undervoltage protection
- TXD-dominant time-out (DTO)
  - Data rates down to 9.2kbps
- Thermal-shutdown protection (TSD)
Operating modes:
- Normal mode
- Low power standby mode supporting remote wake-up request
Optimized behavior when unpowered
- Bus and logic pins are high impedance (no load to operating bus or application)
- Hot-plug capable: power up/down glitch-free operation on bus and RXD output
8-Pin SOIC, small footprint SOT-23 and leadless VSON-8 package with improved automated optical inspection (AOI) capability