• VID V62/07604-01XE (TLV3011-EP)
• VID V62/23603-01XE (TLV3012-EP)
• Controlled baseline
  • One assembly - test site
  • One fabrication site
  • Extended product life cycle
• Enhanced diminishing manufacturing sources (DMS) support
• Extended temperature range of –55°C to 125°C
• Low quiescent current: 3.1 μA (maximum)
• Integrated series voltage reference: 1.242 V
• Input common-mode range: 200 mV beyond rails
• Voltage reference initial accuracy: 1%
• Open-drain output (TLV3011-EP)
• Push-pull output (TLV3012-EP)
• Interated hysteresis (TLV3012-EP Only)
• Fail-safe inputs (TLV3012-EP Only)
• Power on reset (TLV3012-EP Only)
• Supply range: 1.65 V to 5.5 V (TLV3012-EP Only)
• Fast response time: 2 μs
• Microsize package: SOT-23-6

• Battery-powered level detection
• Data acquisition
• System monitoring
• Oscillators
• Sensor systems

The TLV3011-EP is a low-power, open-drain output comparator; the TLV3012-EP is a push-pull output comparator. Both devices feature an uncommitted onchip voltage reference and have a 3.1 μA (maximum) quiescent current, an input common-mode range 200 mV beyond the supply rails, and single-supply operation from 1.65 V to 5.5 V.

The integrated 1.242-V series voltage reference offers low 100-ppm/°C (maximum) drift, is stable with up to 10-nF capacitive load, and can sink or source up to 0.5 mA (typical) of output current that allows driving external circuitry.

The TLV3011-EP and TLV3012-EP are available in the tiny SOT-23-6 package for constrained-space designs. The devices are specified for the extended temperature range of –55°C to 125°C.