ADS127L18
Eight-channel, simultaneous-sampling, 512-kSPS, wideband 24-bit delta-sigma ADC
ADS127L18
- Simultaneously measure four or eight channels
- Wideband filter mode: up to 512kSPS
- Low-latency filter mode: up to 1365kSPS
- Power-scalable speed modes:
- Max speed: 512kSPS
- 83mW (ADS127L14)
- 165mW (ADS127L18)
- High speed: 400kSPS
- 64mW (ADS127L14)
- 128mW (ADS127L18)
- Mid speed: 200kSPS
- 37mW (ADS127L14)
- 74mW (ADS127L18)
- Low speed: 50kSPS
- 12mW (ADS127L14)
- 24mW (ADS127L18)
- Max speed: 512kSPS
- AC performance with DC precision: (High-Speed Mode)
- Dynamic range at 200kSPS: 112dB (typical)
- THD: –118dB (typical)
- INL: 1ppm of FSR (typical)
- Offset drift: 10nV/°C (typical)
- Gain drift: 0.5ppm/°C (typical)
- Precharge buffered signal inputs
- Programmable by pin setting or SPI
- Frame-sync port for output data
- Internal or external clock operation
- Analog supply voltage: 2.85V to 5.5V
The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode).
Similar products you might be interested in
Same functionality with different pin-out to the compared device
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | ADS127L1x 512kSPS, Quad and Octal, Simultaneous-Sampling, 24-Bit ADCs datasheet (Rev. B) | PDF | HTML | 22 Nov 2024 |
EVM User's guide | ADS127L18EVM-PDK Evaluation Module User's Guide | PDF | HTML | 06 Feb 2024 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
ADS127L18EVM-PDK — ADS127L18 evaluation module
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Supported products & hardware
Products
Precision op amps (Vos<1mV)
General-purpose op amps
Audio op amps
Transimpedance amplifiers
High-speed op amps (GBW ≥ 50 MHz)
Power op amps
Video amplifiers
Line drivers
Transconductance amplifiers & laser drivers
Fully differential amplifiers
Precision ADCs
Biosensing AFEs
High-speed ADCs (≥10 MSPS)
Touchscreen controllers
Difference amplifiers
Instrumentation amplifiers
Audio line receivers
Analog current-sense amplifiers
Digital power monitors
Analog current-sense amplifiers with integrated shunt resistor
Digital power monitors with integrated shunt resistor
Die & wafer services
RF receivers
RF transceivers
RF transmitters
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
Supported products & hardware
Products
Series voltage references
Precision ADCs
Biosensing AFEs
Integrated precision ADCs & DACs
High-speed ADCs (≥10 MSPS)
Precision DACs (≤10 MSPS)
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
TINA-TI — SPICE-based analog simulation program
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
VQFN (RSH) | 56 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.