LP38852

AKTIV

Einstellbarer Spannungsregler mit extrem niedriger Dropout-Spannung, 1,5 A, niedrige VIN (0,93 V), m

Jetzt bestellen

Datenblatt

document-pdfAcrobat LP38852-ADJ 1.5-A Fast-Response High-Accuracy Adjustable LDO Linear Regulator With Enable and Soft-Start datasheet (Rev. F) (Englisch) PDF | HTML

LP38852

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Output options

Adjustable Output

Iout (max) (A)

1.5

Vin (max) (V)

5.5

Vin (min) (V)

0.93

Vout (max) (V)

1.8

Vout (min) (V)

0.8

Rating

Catalog

Noise (µVrms)

90

PSRR at 100 KHz (dB)

35

Iq (typ) (mA)

10

Thermal resistance θJA (°C/W)

34

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Features

Enable, Soft start

Accuracy (%)

3

Dropout voltage (Vdo) (typ) (mV)

130

Operating temperature range (°C)

-40 to 125

Output options

Adjustable Output

Iout (max) (A)

1.5

Vin (max) (V)

5.5

Vin (min) (V)

0.93

Vout (max) (V)

1.8

Vout (min) (V)

0.8

Rating

Catalog

Noise (µVrms)

90

PSRR at 100 KHz (dB)

35

Iq (typ) (mA)

10

Thermal resistance θJA (°C/W)

34

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Features

Enable, Soft start

Accuracy (%)

3

Dropout voltage (Vdo) (typ) (mV)

130

Operating temperature range (°C)

-40 to 125

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

TO-220 (NDZ)

7

82.6008 mm² 10.16 x 8.13

TO-263 (KTW)

7

153.924 mm² 10.1 x 15.24

Input V_IN Range 0.93 V to 5.5 V
Adjustable V_OUT Range 0.8 V to 1.8 V
Wide V_BIAS Supply Operating Range 3 V to 5.5 V
Dropout Voltage of 130 mV (Typical) at 1.5-A Load Current
Precision Output Voltage Across All Line and Load Conditions:
- ±1.5% V_ADJ for T_J = 25°C
- ±2% V_ADJ for 0°C ≤ T_J ≤ +125°C
- ±3% V_ADJ for –40°C ≤ T_J ≤ +125°C
Overtemperature and Overcurrent Protection
Stable with 10-µF Ceramic Capacitors
Available in 7-pin TO-220, 7-Pin DDPAK/TO-263, and 8-Pin SO PowerPAD Packages
−40°C to +125°C Operating Junction Temperature Range

Input V_IN Range 0.93 V to 5.5 V
Adjustable V_OUT Range 0.8 V to 1.8 V
Wide V_BIAS Supply Operating Range 3 V to 5.5 V
Dropout Voltage of 130 mV (Typical) at 1.5-A Load Current
Precision Output Voltage Across All Line and Load Conditions:
- ±1.5% V_ADJ for T_J = 25°C
- ±2% V_ADJ for 0°C ≤ T_J ≤ +125°C
- ±3% V_ADJ for –40°C ≤ T_J ≤ +125°C
Overtemperature and Overcurrent Protection
Stable with 10-µF Ceramic Capacitors
Available in 7-pin TO-220, 7-Pin DDPAK/TO-263, and 8-Pin SO PowerPAD Packages
−40°C to +125°C Operating Junction Temperature Range

The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: V_BIAS provides voltage to drive the gate of the N-MOS power transistor, while V_IN is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow V_IN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.

The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.

130 mV (typical) at 1.5-A load current.

10 mA (typical) at 1.5-A load current.

Programmable soft-start time.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP38852-ADJ is a high-current, fast-response regulator which can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: V_BIAS provides voltage to drive the gate of the N-MOS power transistor, while V_IN is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultralow V_IN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.

The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch-mode power supply post-regulators.

130 mV (typical) at 1.5-A load current.

10 mA (typical) at 1.5-A load current.

Programmable soft-start time.

For all available packages, see the orderable addendum at the end of the data sheet.

filter

Andere Linear- und Low-Dropout-Regler (LDO) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 4

	Typ	Titel		Datum
*	Data sheet	LP38852-ADJ 1.5-A Fast-Response High-Accuracy Adjustable LDO Linear Regulator With Enable and Soft-Start datasheet (Rev. F)	PDF \| HTML	17 Dez 2015
	Selection guide	Power Management Guide 2018 (Rev. R)		25 Jun 2018
	EVM User's guide	AN-1560 LP38852MR-ADJ Evaluation Board (Rev. B)		24 Apr 2013
	Application note	AN-1815 LDOs Ease the Stress of Start-Up (Rev. A)		24 Apr 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
HSOIC (DDA)	8	Ultra Librarian
TO-220 (NDZ)	7	Ultra Librarian
TO-263 (KTW)	7	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

LP38852

Einstellbarer Spannungsregler mit extrem niedriger Dropout-Spannung, 1,5 A, niedrige VIN (0,93 V), m

LP38852

Produktdetails

Technische Dokumentation

Design und Entwicklung

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos