Startseite Energiemanagement AC/DC- und DC/DC-Controller (externer FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Controller (externer FET)

UC3578

NICHT FÜR NEUE DESIGNS EMPFOHLEN

Abwärtswandler-Pulsweitenmodulator

Jetzt bestellen
Datenblatt
UC3578 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
LM5145 AKTIV Synchroner Abwärtsregler mit großem Eingangsspannungsbereich und Tastverhältnis, 75 V Voltage mode controller with adjustable switching frequency
Ähnliche Funktionalität wie verglichener Baustein
TPSM365R3 AKTIV 0,3-A-Synchron-Abwärtswandlerstrommodul, 3 bis 65 V Eingang, 1 bis 13 V Ausgang Save board space, simplify design and speed time to market with an integrated-inductor power module.

UC3578

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Vin (min) (V) 11 Vin (max) (V) 72 Iout (max) (A) 0.2 Operating temperature range (°C) 0 to 70 Control mode Voltage mode Rating Catalog Vout (min) (V) 5 Vout (max) (V) 62 Features Enable Iq (typ) (µA) 10000 Duty cycle (max) (%) 100
Vin (min) (V) 11 Vin (max) (V) 72 Iout (max) (A) 0.2 Operating temperature range (°C) 0 to 70 Control mode Voltage mode Rating Catalog Vout (min) (V) 5 Vout (max) (V) 62 Features Enable Iq (typ) (µA) 10000 Duty cycle (max) (%) 100
SOIC (D) 16 59.4 mm² 9.9 x 6
  • Provides Simple Single Inductor Buck PWM Step-Down Voltage Regulation
  • Drives External High Side NMOS Switch
  • 14V to 72V Input Voltage Operating Range
  • Contains 100kHz Internal Oscillator, 2V Reference and UVLO
  • Soft Start on Power Up
  • Overcurrent Shutdown Followed by Soft Start
  • Provides Simple Single Inductor Buck PWM Step-Down Voltage Regulation
  • Drives External High Side NMOS Switch
  • 14V to 72V Input Voltage Operating Range
  • Contains 100kHz Internal Oscillator, 2V Reference and UVLO
  • Soft Start on Power Up
  • Overcurrent Shutdown Followed by Soft Start

The UC3578 is a PWM controller with an integrated high side floating gate driver. It is used in buck step down converters and regulates a positive output voltage. Intended to be used in a distributed power system, the IC allows operation from 14V to 72V input voltage which range includes the prevalent telecomm bus voltages. The output duty cycle of the UC3578 can vary between 0% and 90% for operation over the wide input voltage and load conditions.

The UC3578 simplifies the design of the single switch PWM buck converter by incorporating a floating high side driver for an external N-channel MOSFET switch. It also features a 100kHz fixed frequency oscillator, an internal 2V precision reference, an error amplifier configured for voltage mode operation, and a PWM comparator with latching logic. Complementing the traditional voltage mode control block, the UC3578 incorporates an overcurrent shutdown circuit with full cycle soft re-start to limit the input current to a user defined maximum value during overload operation. Additional functions include an under voltage lockout circuit to insure that sufficient input supply voltage is present before any switching activity can occur.

The UC2578 and the UC3578 are both available in surface mount and thru-hole power packages.

The UC3578 is a PWM controller with an integrated high side floating gate driver. It is used in buck step down converters and regulates a positive output voltage. Intended to be used in a distributed power system, the IC allows operation from 14V to 72V input voltage which range includes the prevalent telecomm bus voltages. The output duty cycle of the UC3578 can vary between 0% and 90% for operation over the wide input voltage and load conditions.

The UC3578 simplifies the design of the single switch PWM buck converter by incorporating a floating high side driver for an external N-channel MOSFET switch. It also features a 100kHz fixed frequency oscillator, an internal 2V precision reference, an error amplifier configured for voltage mode operation, and a PWM comparator with latching logic. Complementing the traditional voltage mode control block, the UC3578 incorporates an overcurrent shutdown circuit with full cycle soft re-start to limit the input current to a user defined maximum value during overload operation. Additional functions include an under voltage lockout circuit to insure that sufficient input supply voltage is present before any switching activity can occur.

The UC2578 and the UC3578 are both available in surface mount and thru-hole power packages.
filter Andere AC/DC- und DC/DC-Controller (externer FET) suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet Buck Pulse Width Modulator Stepdown Voltage Regulator datasheet 05 Sep 1999

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort