Inicio Controladores para motores Drivers de discos ópticos
Inicio
Controladores para motores
Drivers de discos ópticos

TPIC2010

ACTIVO

Controlador de motor de 9 canales controlado por interfaz en serie con convertidor DC/DC de 2 canale

Haga su pedido ahora
Hoja de datos

TPIC2010

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Applications 4K Ultra HD, Blu-ray, CD, DVD Motor driver channels 9 Integrated supply 2 DC/DC converters Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
Applications 4K Ultra HD, Blu-ray, CD, DVD Motor driver channels 9 Integrated supply 2 DC/DC converters Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
HTSSOP (DFD) 56 113.4 mm² 14 x 8.1
  • Serial Peripheral Interface
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With
      DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit
      DAC Control
    • Load Driver With 12-Bit DAC Control
    • Stepping Motor Driver With 8-Bit PWM Control
    • End Position Detector for Collimator Lens,
      Sled Without Position Sensor
  • Spindle Motor Driver
    • Sensor-Less BEMF Position Feedback
    • 12-Bit Spindle DAC
    • Self-Contained Inductive Position Sense and
      Startup
    • Quick Stop by Automatic Controlled Brake:

      Active Brake and Short Brake
    • 0.7-A Maximum Continuous Current Excluding

      Thermal Issues
    • LS Mode: 25% Speed
  • On-Chip Thermometer (15°C to 172.5°C)
  • Switch
    • Two Switch Circuits Controllable by Software
    • LED: Switch for LED Driver With 0.1-A OCP
    • CSW: Low RDS(ON) Current Switch With 0.1-A
      OCP
  • DC-DC Converter
    • V1Px: Pin-Selectable Conversion Voltage 1.0 V /
      1.2 V / 1.5 V; 0.9-A Output Capability With
      1.85-A Overcurrent Protection
    • V3P3: Fixed 3.3-V DC-DC Converter; 0.5-A
      Output Capability With 1.15-A Overcurrent
      Protection
    • 2.5-MHz Switching Frequency
    • Improved Efficiency at Low Current With
      Discontinuous Regulation Mode
  • Protection
    • Individual Thermal Protect Circuit on
      LED/CSW, Switch, DCDC Converter, SPM,
      and Actuator
    • Two Alert Levels: Pre-Detect and Detect in

      Thermal Protection
    • ACTTEMP: Monitor the Actuator Temperature
      Calculated from Integrated the DAC Value Set
      Up in the Past
    • Undervoltage Lockout (UVLO) and
      Overvoltage Protection (OVP)
  • Serial Peripheral Interface
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With
      DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit
      DAC Control
    • Load Driver With 12-Bit DAC Control
    • Stepping Motor Driver With 8-Bit PWM Control
    • End Position Detector for Collimator Lens,
      Sled Without Position Sensor
  • Spindle Motor Driver
    • Sensor-Less BEMF Position Feedback
    • 12-Bit Spindle DAC
    • Self-Contained Inductive Position Sense and
      Startup
    • Quick Stop by Automatic Controlled Brake:

      Active Brake and Short Brake
    • 0.7-A Maximum Continuous Current Excluding

      Thermal Issues
    • LS Mode: 25% Speed
  • On-Chip Thermometer (15°C to 172.5°C)
  • Switch
    • Two Switch Circuits Controllable by Software
    • LED: Switch for LED Driver With 0.1-A OCP
    • CSW: Low RDS(ON) Current Switch With 0.1-A
      OCP
  • DC-DC Converter
    • V1Px: Pin-Selectable Conversion Voltage 1.0 V /
      1.2 V / 1.5 V; 0.9-A Output Capability With
      1.85-A Overcurrent Protection
    • V3P3: Fixed 3.3-V DC-DC Converter; 0.5-A
      Output Capability With 1.15-A Overcurrent
      Protection
    • 2.5-MHz Switching Frequency
    • Improved Efficiency at Low Current With
      Discontinuous Regulation Mode
  • Protection
    • Individual Thermal Protect Circuit on
      LED/CSW, Switch, DCDC Converter, SPM,
      and Actuator
    • Two Alert Levels: Pre-Detect and Detect in

      Thermal Protection
    • ACTTEMP: Monitor the Actuator Temperature
      Calculated from Integrated the DAC Value Set
      Up in the Past
    • Undervoltage Lockout (UVLO) and
      Overvoltage Protection (OVP)

TPIC2010 is a very-low noise type motor driver IC suitable for slim or ultra-slim ODD. The 9-channel driver IC controlled by serial I/F is optimal for driving a spindle motor, a sled motor (stepping motor applicable), a load motor, and focus / tracking / tilt actuators and stepping motor for collimator lens. This driver IC includes 2-channel synchronous DC-DC converters.

The discontinuous regulation mode on the DC-DC converter improves efficiency at low power consumption significantly. The spindle motor driver uses BEMF feedback for startup, control, and low-noise operation without needing external sensors. In addition, the TPIC2010 has many protection features including: spindle output current limiting, thermal shutdown, sled and collimator lens end detection, actuator protection, and power-reset circuit. The TPIC2010 also has a built-in thermometer for easy IC temperature measurement.

TPIC2010 is a very-low noise type motor driver IC suitable for slim or ultra-slim ODD. The 9-channel driver IC controlled by serial I/F is optimal for driving a spindle motor, a sled motor (stepping motor applicable), a load motor, and focus / tracking / tilt actuators and stepping motor for collimator lens. This driver IC includes 2-channel synchronous DC-DC converters.

The discontinuous regulation mode on the DC-DC converter improves efficiency at low power consumption significantly. The spindle motor driver uses BEMF feedback for startup, control, and low-noise operation without needing external sensors. In addition, the TPIC2010 has many protection features including: spindle output current limiting, thermal shutdown, sled and collimator lens end detection, actuator protection, and power-reset circuit. The TPIC2010 also has a built-in thermometer for easy IC temperature measurement.
filter Buscar otro/a Drivers de discos ópticos
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPIC2010 Serial I/F Controlled 9-Channel Motor-Driver With 2-Channel DC-DC datasheet PDF | HTML 16 dic 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (DFD) 56 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos