ホーム ワイヤレス・コネクティビティ Sub-1GHz 製品 Sub-1GHz トランシーバ
ホーム
ワイヤレス・コネクティビティ
Sub-1GHz 製品
Sub-1GHz トランシーバ

CC1050

新規設計での使用を推奨しません

315/433/868/915MHz の各 SRD (短距離デバイス) 帯域対応、シングルチップ、超低消費電力 RF トランスミッタ

ご注文はこちら
データシート
エラッタ

CC1050

新規設計での使用を推奨しません
データシート ご注文はこちら

製品詳細

Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.
filter その他の Sub-1GHz トランシーバ を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* エラッタ CC1050 Errata Notes (Rev. A) 2014年 4月 23日
* データシート Single-Chip Very Low Power RF Transmitter データシート 2006年 1月 30日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点