ホーム オーディオ オーディオ・アンプ スピーカ・アンプ
ホーム
オーディオ
オーディオ・アンプ
スピーカ・アンプ

LM48520

アクティブ

昇圧コンバータ内蔵、EMI スペクトラム拡散機能搭載、2.7W、ステレオ、アナログ入力 Class-D オーディオ・アンプ

ご注文はこちら
データシート

LM48520

アクティブ
データシート ご注文はこちら

製品詳細

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.
filter その他の スピーカ・アンプ を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM48520 Boostd Stere Clas D Audio Pwr Amp w/Output Spkr Prot & Spread Spectrum データシート (Rev. C) 2013年 4月 5日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

投稿されたすべてのフォーラムトピック (英語) を表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​