ホーム インターフェイス イーサネット IC イーサネット PHY
ホーム
インターフェイス
イーサネット IC
イーサネット PHY

TLK100

新規設計での使用を推奨しません

産業用イーサネット PHY

ご注文はこちら
データシート

TLK100

新規設計での使用を推奨しません
データシート ご注文はこちら

製品詳細

Datarate (Mbps) 10/100 Interface type MII Number of ports Single Rating Catalog Features Cable diagnostics, JTAG1149.1 Supply voltage (V) 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 3 ESD HBM (kV) 16
Datarate (Mbps) 10/100 Interface type MII Number of ports Single Rating Catalog Features Cable diagnostics, JTAG1149.1 Supply voltage (V) 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 3 ESD HBM (kV) 16
HTQFP (PHP) 48 81 mm² 9 x 9
  • Temperature From –40°C to 85°C
  • Low Power Consumption, < 200mW Typical
  • Cable Diagnostics
  • Error-Free Operation up to 200 Meters Under Typical Conditions
  • 3.3V MAC Interface
  • Auto-MDIX for 10/100 Mb/s
  • Energy Detection Mode
  • 25 MHz Clock Out
  • MII Serial Management Interface (MDC and MDIO)
  • IEEE 802.3u MII
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • IEEE 802.3u ENDEC, 10BASE-T Transceivers and Filters
  • Bus I/O Protection - ±16kV JEDEC HBM
  • IEEE 802.3u PCS, 100BASE-TX Transceivers
  • Enables IEEE1588 Time-Stamping
  • IEEE 1149.1 JTAG
  • Integrated ANSI X3.263 Compliant TP-PMD Physical Sublayer with
    Adaptive Equalization and Baseline Wander Compensation
  • Programmable LED Support Link, 10/100 Mb/s Mode, Activity,
    and Collision Detect
  • 10/100 Mb/s Packet BIST (Built in Self Test)
  • 48-pin TQFP Package (7mm) × (7mm)
  • Applications
    • Industrial Controls and Factory Automation
    • General Embedded Applications
  • Temperature From –40°C to 85°C
  • Low Power Consumption, < 200mW Typical
  • Cable Diagnostics
  • Error-Free Operation up to 200 Meters Under Typical Conditions
  • 3.3V MAC Interface
  • Auto-MDIX for 10/100 Mb/s
  • Energy Detection Mode
  • 25 MHz Clock Out
  • MII Serial Management Interface (MDC and MDIO)
  • IEEE 802.3u MII
  • IEEE 802.3u Auto-Negotiation and Parallel Detection
  • IEEE 802.3u ENDEC, 10BASE-T Transceivers and Filters
  • Bus I/O Protection - ±16kV JEDEC HBM
  • IEEE 802.3u PCS, 100BASE-TX Transceivers
  • Enables IEEE1588 Time-Stamping
  • IEEE 1149.1 JTAG
  • Integrated ANSI X3.263 Compliant TP-PMD Physical Sublayer with
    Adaptive Equalization and Baseline Wander Compensation
  • Programmable LED Support Link, 10/100 Mb/s Mode, Activity,
    and Collision Detect
  • 10/100 Mb/s Packet BIST (Built in Self Test)
  • 48-pin TQFP Package (7mm) × (7mm)
  • Applications
    • Industrial Controls and Factory Automation
    • General Embedded Applications

The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. It integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device supports the standard Media Independent Interface (MII) for direct connection to a Media Access Controller (MAC).

The TLK100 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V, 1.8V, and 1.1V power supplies for reduced power operation.

The TLK100 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. It not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.

The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. It integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device supports the standard Media Independent Interface (MII) for direct connection to a Media Access Controller (MAC).

The TLK100 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V, 1.8V, and 1.1V power supplies for reduced power operation.

The TLK100 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. It not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
filter その他の イーサネット PHY を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Industrial Ethernet PHY データシート (Rev. B) 2009年 10月 9日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点