MỚI

TCAN3403-Q1

ACTIVE

Bộ thu phát tốc độ dữ liệu linh hoạt (FD) 3,3V CAN dành cho ô tô với chế độ chờ và I/O linh hoạt

TCAN3403-Q1

ACTIVE

Chi tiết sản phẩm

Máy chủ tạm thời không khả dụng. Vui lòng thử lại sau.

SOIC (D)

8

29.4 mm² 4.9 x 6

SOT-23-THN (DDF)

8

8.12 mm² 2.9 x 2.8

VSON (DRB)

8

9 mm² 3 x 3

AEC-Q100 Qualified for automotive applications
3.3V Single supply operation
- Eliminates the 5V regulator saving BOM cost and reducing PCB space
Excellent EMC operation in homogeneous and heterogeneous networks
Compatible with the requirements of ISO 11898-2:2016 physical layer standard
Functional Safety-Capable
- Documentation available to aid in functional safety system design
Support of classical CAN and optimized CAN FD performance at 2, 5, and 8Mbps
- Short and symmetrical propagation delays for enhanced timing margin
TCANC3403-Q1: I/O voltage range supports: 1.7V to 3.6V
Receiver common mode input voltage: ±30V
Protection features:
- Bus fault protection: ±58V
- ISO 10605 ESD on bus pins: ±8kV
- Undervoltage protection
- TXD-dominant time-out (DTO)
- Thermal-shutdown protection (TSD)
Operating modes:
- Normal mode
- Low power standby mode supporting remote wake-up request
- Ultra-low power shutdown mode: TCANC3404-Q1 only
Optimized behavior when unpowered
- Bus and logic pins are high impedance (no load to operating bus or application)
- Hot-plug capable: power up or down glitch-free operation on bus and RXD output
8-Pin SOIC, small footprint SOT-23 and lead less VSON-8 package with wettable flanks for automated optical inspection (AOI)

AEC-Q100 Qualified for automotive applications
3.3V Single supply operation
- Eliminates the 5V regulator saving BOM cost and reducing PCB space
Excellent EMC operation in homogeneous and heterogeneous networks
Compatible with the requirements of ISO 11898-2:2016 physical layer standard
Functional Safety-Capable
- Documentation available to aid in functional safety system design
Support of classical CAN and optimized CAN FD performance at 2, 5, and 8Mbps
- Short and symmetrical propagation delays for enhanced timing margin
TCANC3403-Q1: I/O voltage range supports: 1.7V to 3.6V
Receiver common mode input voltage: ±30V
Protection features:
- Bus fault protection: ±58V
- ISO 10605 ESD on bus pins: ±8kV
- Undervoltage protection
- TXD-dominant time-out (DTO)
- Thermal-shutdown protection (TSD)
Operating modes:
- Normal mode
- Low power standby mode supporting remote wake-up request
- Ultra-low power shutdown mode: TCANC3404-Q1 only
Optimized behavior when unpowered
- Bus and logic pins are high impedance (no load to operating bus or application)
- Hot-plug capable: power up or down glitch-free operation on bus and RXD output
8-Pin SOIC, small footprint SOT-23 and lead less VSON-8 package with wettable flanks for automated optical inspection (AOI)

The TCANC3403-Q1 and TCANC3404-Q1 are 3.3V controller area network (CAN) FD transceivers that are compatible with the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.

The transceivers have certified electromagnetic compatibility (EMC) operation for use with classical CAN and CAN FD networks up to 5 megabits per second (Mbps). Up to 8Mbps operation in simpler networks is possible with these devices. The TCANC3403-Q1 includes an internal logic level translation through the VIO pin, allowing the direct interface of the transceiver I/Os to 1.8V, 2.5V, or 3.3V logic levels. The TCANC3404-Q1 has shutdown feature where all blocks are powered off and device enters ultra-low power consumption mode. The transceivers support a low-power standby mode, and a wake over CAN which is compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP).

The transceivers include thermal-shutdown (TSD), TXD-dominant time-out (DTO) and supply undervoltage detection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. These devices are available in industry-standard SOIC-8, the VSON-8, and a space-saving small footprint SOT-23 packages.

The TCANC3403-Q1 and TCANC3404-Q1 are 3.3V controller area network (CAN) FD transceivers that are compatible with the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.

The transceivers have certified electromagnetic compatibility (EMC) operation for use with classical CAN and CAN FD networks up to 5 megabits per second (Mbps). Up to 8Mbps operation in simpler networks is possible with these devices. The TCANC3403-Q1 includes an internal logic level translation through the VIO pin, allowing the direct interface of the transceiver I/Os to 1.8V, 2.5V, or 3.3V logic levels. The TCANC3404-Q1 has shutdown feature where all blocks are powered off and device enters ultra-low power consumption mode. The transceivers support a low-power standby mode, and a wake over CAN which is compliant to the ISO 11898-2:2016 defined wake-up pattern (WUP).

The transceivers include thermal-shutdown (TSD), TXD-dominant time-out (DTO) and supply undervoltage detection. The devices have defined fail-safe behavior in supply undervoltage or floating pin scenarios. These devices are available in industry-standard SOIC-8, the VSON-8, and a space-saving small footprint SOT-23 packages.

filter

Tìm thứ khác CAN & LIN transceivers & SBCs|CAN

Tải xuống Xem video có bản chép lời Video