32-pin (RHB) package image

ADS125H02IRHBT 現行

具有 ±20V 輸入、PGA、IDAC、GPIO 和 VREF 的 24 位元、40 kSPS、雙通道 Delta-Sigma ADC

現行 custom-reels 客製 可提供客製捲盤

定價

數量 價格
+

額外包裝數量 | 包裝類型選項 這些產品完全相同,但包裝類型不同

ADS125H02IRHBR 現行 custom-reels 客製 可提供客製捲盤
包裝數量 | 運送業者 3,000 | LARGE T&R
庫存
數量 | 價格 1ku | +

品質資訊

等級 Catalog
RoHS
REACH
引腳鍍層 / 焊球材質 NIPDAU
MSL 等級 / 迴焊峰值 Level-3-260C-168 HR
品質、可靠性
及包裝資訊

內含資訊:

  • RoHS
  • REACH
  • 產品標記
  • 引腳鍍層 / 焊球材質
  • MSL 等級 / 迴焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
檢視或下載
其他製造資訊

內含資訊:

  • 晶圓廠位置
  • 組裝地點
檢視

出口分類

*僅供參考

  • 美國 ECCN:EAR99

封裝資訊

封裝 | 針腳 VQFN (RHB) | 32
操作溫度範圍 (°C) -40 to 125
包裝數量 | 運送業者 250 | SMALL T&R

ADS125H02 的特色

  • ±20-V input, 24-bit delta-sigma ADC
  • Programmable data rate: 2.5 SPS to 40 kSPS
  • High-voltage, high-impedance PGA:
    • Differential input range: up to ±20 V
    • Programmable gain: 0.125 to 128
    • Common-mode input voltage: up to ±15.5 V
    • Input impedance: 1 GΩ (minimum)
  • High-performance ADC:
    • Input noise: 45 nVRMS (20 SPS)
    • CMRR: 105 dB
    • Normal-mode rejection at 50 Hz, 60 Hz: 95 dB
    • Offset drift: 5 nV/°C
    • Gain drift: 1 ppm/°C
    • INL: 2 ppm
  • Integrated features and diagnostics:
    • 2.5-V reference: 3 ppm/°C drift
    • Clock oscillator: 2.5% error (maximum)
    • Excitation current sources
    • GPIO to drive external mux
    • Signal and reference voltage monitors
    • Cyclic redundancy check (CRC)
  • Power supplies:
    • AVDD: 4.75 V to 5.25 V
    • DVDD: 2.7 V to 5.25 V
    • HVDD: ±5 V to ±18 V
  • Operating temperature: –40°C to +125°C
  • 5-mm × 5-mm VQFN package

ADS125H02 的說明

The ADS125H02 is a ±20-V input, 24-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC). The ADC features a low-noise programmable gain amplifier (PGA), an internal reference, clock oscillator, and signal or reference out-of-range monitors.

The integration of a wide input range, ±18-V PGA and an ADC into a single package reduces board area up to 50% compared to discrete solutions.

Programmable gain of 0.125 to 128 (corresponding to an equivalent input range from ±20 V to ±20 mV) eliminates the need for an external attenuator or external gain stages. 1-GΩ minimum input impedance reduces error caused by sensor loading. Additionally, the low noise and low drift performance allow direct connections to bridge, resistance temperature detector (RTD), and thermocouple sensors.

The digital filter attenuates 50-Hz and 60-Hz line cycle noise for data rates ≤ 50 SPS or 60 SPS to reduce measurement error. The filter also provides no-latency conversion data for high data throughput during channel sequencing.

The ADS125H02 is housed in a 5-mm × 5-mm VQFN package and is fully specified over the –40°C to +125°C temperature range.

定價

數量 價格
+

額外包裝數量 | 包裝類型選項 這些產品完全相同,但包裝類型不同

ADS125H02IRHBR 現行 custom-reels 客製 可提供客製捲盤
包裝數量 | 運送業者 3,000 | LARGE T&R
庫存
數量 | 價格 1ku | +

包裝類型選項

您可依零件數量選擇不同包裝類型選項,包含完整捲盤、客製化捲盤、剪切捲帶、承載管或盤。

客製化捲盤是從一個捲盤上剪切下來的連續剪切捲帶,以維持批次和日期代碼可追溯性,依要求剪切至確切數量。依照業界標準,銅墊片會在剪切捲帶兩側連接 18 英吋前後導帶,以直接送至自動組裝機器。針對客製化捲盤訂單,TI 將酌收捲帶封裝費用。

剪切捲帶是從捲盤剪切下來的一段捲帶。TI 可能使用多條剪切捲帶或承載盒,以滿足訂單要求數量。

TI 常以盒裝或管裝、盤裝方式運送承載管裝置,視現有庫存而定。所有捲帶、管或樣本盒之封裝,皆符合公司內部靜電放電與防潮保護包裝要求。

進一步了解

可提供批次和日期代碼選擇

在購物車中加入數量,並開始結帳流程以檢視可用選項,從現有庫存中選擇批次或日期代碼。

進一步了解