首頁 無線連線 Sub-1 GHz 產品 Sub-1 GHz 收發器
首頁
無線連線
Sub-1 GHz 產品
Sub-1 GHz 收發器

CC1050

不推薦在新設計中採用

適用 315/433/868/915 MHz SRD 頻帶的單晶片超低功率 RF 發射器

立即訂購
產品規格表
勘誤表

CC1050

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transmitter TX power (max) (dBm) 12 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data
  • True single chip UHF RF transmitter
  • Very low current consumption
  • Frequency range 300 – 1000 MHz
  • Programmable output power –20 to 12 dBm
  • Small size (TSSOP-24 package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • Single-ended antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development Kit available
  • Easy-to-use software for generating the CC1050 configuration data

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.

CC1050 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1050 can be programmed via an easy-to-interface serial bus, thus making CC1050 a very flexible and easy to use transmitter. In a typical system CC1050 will be used together with a microcontroller and a few external passive components.

CC1050 is based on Chipcon's SmartRF® technology in 0.35 µm CMOS.
filter 尋找其它 Sub-1 GHz 收發器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Errata CC1050 Errata Notes (Rev. A) 2014年 4月 23日
* Data sheet Single-Chip Very Low Power RF Transmitter datasheet 2006年 1月 30日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點