CC2564MODN

• Module Solution Based on TI's CC2564B Dual-Mode Bluetooth^®, Available in Two Variants:
  • CC2564MODA With Integrated Antenna
  • CC2564MODN With External Antenna
• Fully Certified Module for FCC, IC, CE, and Bluetooth 4.1
  • FCC (Z64-2564N), IC (451I-2564N) Modular Grant (see Section 6.2.1.3, Section 7.1.1, and Section 7.1.2)
  • CE Certified as Summarized in the Declaration of Conformity (see Section 7.1.3)
  • Bluetooth 4.1 Controller Subsystem Qualified (CC2564MODN: QDID 55257; CC2564MODA: QDID 64631). Compliant up to the HCI Layer
• Highly Optimized for Design Into Small Form Factor Systems and Flexibility:
  • CC2564MODA
    • Integrated Chip Antenna
    • Module Footprint: 35 Terminals, 0.8-mm Pitch, 7 mm × 14 mm × 1.4 mm (Typical)
  • CC2564MODN
    • Single-Ended 50-Ω RF Interface
    • Module Footprint: 33 Terminals, 0.8-mm Pitch, 7 mm × 7 mm × 1.4 mm (Typical)
• BR and EDR Features Include:
  • Up to Seven Active Devices
  • Scatternet: Up to Three Piconets Simultaneously, One as Master and Two as Slaves
  • Up to Two Synchronous Connection Oriented (SCO) Links on the Same Piconet
  • Support for All Voice Air-Coding—Continuously Variable Slope Delta (CVSD), A-Law, µ-Law, and Transparent (Uncoded)
  • Assisted Mode for HFP 1.6 Wideband Speech (WBS) Profile or A2DP Profile to Reduce Host Processing and Power
  • Support of Multiple Bluetooth Profiles With Enhanced QoS
• Low Energy Features Include:
  • Support of up to 10 Simultaneous Connections
  • Multiple Sniff Instances Tightly Coupled to Achieve Minimum Power Consumption
  • Independent Buffering for Low Energy Allows Large Numbers of Multiple Connections Without Affecting BR or EDR Performance
  • Built-In Coexistence and Prioritization Handling for BR, EDR, and Low Energy
• Best-in-Class Bluetooth (RF) Performance (TX Power, RX Sensitivity, Blocking)
  • Class 1.5 TX Power up to +10 dBm
  • –93 dbm Typical RX Sensitivity
  • Internal Temperature Detection and Compensation to Ensure Minimal Variation in RF Performance Over Temperature, No External Calibration Required
  • Improved Adaptive Frequency Hopping (AFH) Algorithm With Minimum Adaptation Time
  • Provides Longer Range, Including Twice the Range of Other Low-Energy-Only Solutions
• Advanced Power Management for Extended Battery Life and Ease of Design
  • On-Chip Power Management, Including Direct Connection to Battery
  • Low Power Consumption for Active, Standby, and Scan Bluetooth Modes
  • Shutdown and Sleep Modes to Minimize Power Consumption
• Physical Interfaces:
  • UART Interface With Support for Maximum Bluetooth Data Rates
    • UART Transport Layer (H4) With Maximum Rate of 4 Mbps
    • Three-Wire UART Transport Layer (H5) With Maximum Rate of 4 Mbps
  • Fully Programmable Digital Pulse-Code Modulation (PCM)–I2S Codec Interface
• CC256x Bluetooth Hardware Evaluation Tool: PC-Based Application to Evaluate RF Performance of the Device and Configure Service Pack

All trademarks are the property of their respective owners. All trademarks are the property of their respective owners.