DRV81620-Q1
-
3V to 40V Analog supply voltage
-
Cranking capability down to 3V
-
Supports LV124 standard
-
-
3V to 5.5V Digital supply voltage
-
Compatible with 3.3V and 5V microcontrollers
-
-
44V minimum drain to source clamping voltage
-
-19V maximum source to ground clamping voltage
- RDS(ON): 630mΩ typical at 12V, 25 °C
- Current: 330mA per output at 85 °C, with all channels ON
- 2 parallel inputs with mapping functionality
- Fail-safe activation in Limp Home mode
- Using nSLEEP and IN pins
- Two independent internal PWM generators
- Bulb Inrush Mode (BIM) to drive lamps
- For 2W/5W lamps and other capacitive loads
- Low-current sleep mode
- < 6.5µA using nSLEEP pin
- 16-bit SPI interface for control and diagnosis
- Daisy Chain capability
- Compatible with 8-bit SPI devices
- Supports various protection features -
- Reverse battery protection
- Short circuit to ground and battery protection
- Stable behavior at under voltage conditions
- Over Current latch OFF
- Overtemperature warning
- Thermal shutdown latch OFF
- Overvoltage protection
- Loss of battery and loss of ground protection
- Electrostatic discharge (ESD) protection
- Supports several diagnostic features -
- Diagnostic information via SPI register
- Over Load detection at ON state
- Open Load detection in ON and OFF state
- Input and Output Status Monitor
The DRV81620-Q1 is an eight channel low-side and high-side switch with integrated protection and diagnostics. It is designed to control relays, LEDs, Lamps and motors in automotive and industrial applications.
A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct control of the outputs. The device supports Limp Home mode for fail-safe activation. Integrated PWM generators enable driving LEDs, and bulb inrush mode enables driving loads with large capacitance.
The DRV81620-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81620-Q1 an ideal choice for automotive body and powertrain applications.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV81620-Q1 : 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control datasheet | PDF | HTML | 2024年 9月 11日 |
| EVM User's guide | DRV81xxx-Q1 Evaluation Module User's Guide | PDF | HTML | 2024年 7月 22日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV81620-Q1EVM — DRV81620-Q1 評估模組
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 24 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。