首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

LM48520

現行

具整合式升壓和 EMI 展頻的 2.7W 立體聲道類比輸入 D 類音訊放大器

立即訂購
產品規格表

LM48520

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Stereo Rating Catalog Load (min) (Ω) 8 Output power (W) 1.3 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 8 Control interface GPIO Analog supply (min) (V) 2.6 Analog supply voltage (max) (V) 5 PSRR (dB) 82 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

  • Click and Pop Suppression
  • Low 0.04μA Shutdown Current
  • 78% Efficiency
  • Filterless Class D
  • 2.7V - 5.0V Operation
  • 4 Adjustable Gain Settings
  • Adjustable Output Swing Limiter with Soft Clipping
  • Speaker Protection
  • Short Circuit Protection on Audio Amps
  • Independent Boost and Amplifier Shutdown Pins

Key Specifications

  • Quiescent Power Supply Current: 11.5 mA(typ)
  • Output Power (RL = 8Ω, THD+N ≤ 1%,
    VDD = 3.3V,PV1 = 5.0V): 1.1 W(typ)
  • Shutdown Current: 0.04 μA(typ)

All trademarks are the property of their respective owners.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.

The LM48520 integrates a boost converter with a high efficiency Class D stereo audio power amplifier to provide up to 1W/ch continuous power into an 8Ω speaker when operating from 2.7V to 5.0V power supply with boost voltage (PV1) of 5.0V. The LM48520 utilizes a proprietary spread spectrum pulse width modulation technique that lowers RF interference and EMI levels. The Class D amplifier is a low noise, filterless PWM architecture that eliminates the output filter, reducing external component count, board area, power consumption, system cost, and simplifying design.

The LM48520 is designed for use in mobile phones and other portable communication devices. The high (78%) efficiency extends battery life when compared to Boosted Class AB amplifiers. The LM48520 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). Also, external leakage is minimized via control of the ground reference via the SW-OUT pin .

The LM48520 has 4 gain options which are pin selectable via Gain0 and Gain1 pins. Output short circuit prevents the device from damage during fault conditions. Superior click and pop suppression eliminates audible transients during power-up and shutdown.
filter 尋找其它 喇叭放大器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM48520 Boostd Stere Clas D Audio Pwr Amp w/Output Spkr Prot & Spread Spectrum datasheet (Rev. C) 2013年 4月 5日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​