首頁 音訊 音訊放大器 耳機放大器
首頁
音訊
音訊放大器
耳機放大器

LM4915

現行

400-mW、單聲道、類比輸入耳機放大器

立即訂購
產品規格表

LM4915

現行
產品規格表 立即訂購

產品詳細資料

Output power (W) 0.28 Analog supply (min) (V) 2.2 Analog supply voltage (max) (V) 5.5 Load (min) (Ω) 16 PSRR (dB) 75 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Mono Volume control No Shutdown current (ISD) (µA) 0.1 Architecture Class-AB Iq per channel (typ) (mA) 2
Output power (W) 0.28 Analog supply (min) (V) 2.2 Analog supply voltage (max) (V) 5.5 Load (min) (Ω) 16 PSRR (dB) 75 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Mono Volume control No Shutdown current (ISD) (µA) 0.1 Architecture Class-AB Iq per channel (typ) (mA) 2
WQFN (NGP) 8 4 mm² 2 x 2
  • Pseudo-Differential Amplification
  • Internal Gain-Setting Resistors
  • Available in Space-Saving WQFN Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Pop & Click Circuitry Virtually Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2 - 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors or Gain-Setting Resistors Required
  • Ultra Low Noise

Key Specifications

  • Improved PSRR at 217Hz and 1kHz: 75dB (Typ)
  • Power Output at 5.0V & 1% THD into 32Ω: 280mW (Typ)
  • Power Output at 3.0V & 1% THD into 32Ω: 90mW (Typ)
  • Output Noise, A-weighted: 20μV (Typ)

All trademarks are the property of their respective owners.

  • Pseudo-Differential Amplification
  • Internal Gain-Setting Resistors
  • Available in Space-Saving WQFN Package
  • Ultra Low Current Shutdown Mode
  • Can Drive Capacitive Loads up to 500pF
  • Improved Pop & Click Circuitry Virtually Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.2 - 5.5V Operation
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors or Gain-Setting Resistors Required
  • Ultra Low Noise

Key Specifications

  • Improved PSRR at 217Hz and 1kHz: 75dB (Typ)
  • Power Output at 5.0V & 1% THD into 32Ω: 280mW (Typ)
  • Power Output at 3.0V & 1% THD into 32Ω: 90mW (Typ)
  • Output Noise, A-weighted: 20μV (Typ)

All trademarks are the property of their respective owners.

The LM4915 is a pseudo-differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable audio device applications with mono headphones. It is capable of delivering 90 miliwatts of continuous average power to a 32Ω BTL load with less than 1% distortion (THD+N) from a 3VDC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4915 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4915 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by driving the shutdown pin low. Additionally, the LM4915 features an internal thermal shutdown protection mechanism.

The LM4915 contains advanced pop & click circuitry which virtually eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM4915 has an internally fixed gain of 6dB.

The LM4915 is a pseudo-differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable audio device applications with mono headphones. It is capable of delivering 90 miliwatts of continuous average power to a 32Ω BTL load with less than 1% distortion (THD+N) from a 3VDC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4915 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM4915 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by driving the shutdown pin low. Additionally, the LM4915 features an internal thermal shutdown protection mechanism.

The LM4915 contains advanced pop & click circuitry which virtually eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM4915 has an internally fixed gain of 6dB.

filter 尋找其它 耳機放大器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM4915 Pseudo-Differential Mono Headphone Amplifier with Fixed 6dB Gain datasheet (Rev. A) 2013年 5月 1日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​