LMR36506-Q1

Name: LMR36506-Q1
Brand: TI
SKU: LMR36506-Q1
Price: 1.829 USD

現行

針對尺寸和輕負載效率最佳化的 3V 至 65V、0.6A 降壓轉換器

立即訂購

產品規格表

document-pdfAcrobat LMR36506-Q1 3-V to 65-V, 0.6-A Synchronous Buck Converter Optimized for Size and Light Load Efficiency datasheet (Rev. C) (英文) PDF | HTML

LMR36506-Q1

現行

產品規格表

立即訂購

產品詳細資料

Rating

Automotive

Operating temperature range (°C)

-40 to 150

TI functional safety category

Functional Safety-Capable

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

3

Vin (max) (V)

65

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2200

Features

Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Power good, Spread Spectrum, Synchronous Rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging, Spread Spectrum

Control mode

current mode

Vout (min) (V)

1

Vout (max) (V)

28

Iq (typ) (µA)

4

Duty cycle (max) (%)

99

Rating

Automotive

Operating temperature range (°C)

-40 to 150

TI functional safety category

Functional Safety-Capable

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

3

Vin (max) (V)

65

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2200

Features

Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Power good, Spread Spectrum, Synchronous Rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging, Spread Spectrum

Control mode

current mode

Vout (min) (V)

1

Vout (max) (V)

28

Iq (typ) (µA)

4

Duty cycle (max) (%)

99

VQFN-HR (RPE)

9

4 mm² 2 x 2

AEC-Q100-qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C, T_A
Functional Safety-Capable
- Documentation available to aid functional safety system design
>80% efficiency at 1 mA
- 4 µA I_q (switching) at 24 V_IN to 3.3 V_OUT (fixed output option)
Miniature solution size and low component cost
- 2-mm × 2-mm HotRod™ package with wettable flanks
- Internal compensation
Designed for automotive applications:
- Junction temperature range –40°C to +150°C
- Pseudo-random spread spectrum compatible with CISPR 25 EMI standard
- Wide input voltage range: 3.0 V (falling threshold) to 65 V
- Adjustable, 3.3-V and 5-V fixed output voltage options available
- Synchronizable with MODE/SYNC pin variant
- Adjustable F_SW: 200 kHz to 2.2 MHz with RT pin variant
- Pin compatible with LMR36503-Q1 (65 V, 300 mA)

AEC-Q100-qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C, T_A
Functional Safety-Capable
- Documentation available to aid functional safety system design
>80% efficiency at 1 mA
- 4 µA I_q (switching) at 24 V_IN to 3.3 V_OUT (fixed output option)
Miniature solution size and low component cost
- 2-mm × 2-mm HotRod™ package with wettable flanks
- Internal compensation
Designed for automotive applications:
- Junction temperature range –40°C to +150°C
- Pseudo-random spread spectrum compatible with CISPR 25 EMI standard
- Wide input voltage range: 3.0 V (falling threshold) to 65 V
- Adjustable, 3.3-V and 5-V fixed output voltage options available
- Synchronizable with MODE/SYNC pin variant
- Adjustable F_SW: 200 kHz to 2.2 MHz with RT pin variant
- Pin compatible with LMR36503-Q1 (65 V, 300 mA)

The LMR36506-Q1 is the industry’s smallest 65 V, 0.6 A synchronous step-down DC/DC converter in 2-mm x 2-mm HotRod™ package. This easy-to-use converter can handle input voltage transients up to 70 V, provide excellent EMI performance and support fixed 3.3 V, 5 V and other adjustable output voltages.

The LMR36506-Q1 uses peak current mode control architecture with internal compensation and maintains stable operation with minimal output capacitance. The wide input operating range of the LMR36506-Q1 helps it remain functional during a deep input voltage sag condition, making it an excellent choice for automotive applications withstanding severe cold crank start impulses. The PGOOD flag in the LMR36506-Q1 provides precise indication of the output voltage status, eliminating the requirement for an external supervisor. A seamless transition from FPWM to PFM, with an ultra-low standby quiescent current allows the LMR36506-Q1 to support much higher system efficiency at low output loads. The MODE/SYNC pin variant helps to synchronize the LMR36506-Q1 to an external clock. With the right resistor selection, the LMR36506-Q1 RT pin variant can also be externally programmed to any desired switching frequency of operation. The rich feature set of the LMR36506-Q1 is designed to simplify implementation for a wide range of automotive end equipments.

The LMR36506-Q1 is the industry’s smallest 65 V, 0.6 A synchronous step-down DC/DC converter in 2-mm x 2-mm HotRod™ package. This easy-to-use converter can handle input voltage transients up to 70 V, provide excellent EMI performance and support fixed 3.3 V, 5 V and other adjustable output voltages.

The LMR36506-Q1 uses peak current mode control architecture with internal compensation and maintains stable operation with minimal output capacitance. The wide input operating range of the LMR36506-Q1 helps it remain functional during a deep input voltage sag condition, making it an excellent choice for automotive applications withstanding severe cold crank start impulses. The PGOOD flag in the LMR36506-Q1 provides precise indication of the output voltage status, eliminating the requirement for an external supervisor. A seamless transition from FPWM to PFM, with an ultra-low standby quiescent current allows the LMR36506-Q1 to support much higher system efficiency at low output loads. The MODE/SYNC pin variant helps to synchronize the LMR36506-Q1 to an external clock. With the right resistor selection, the LMR36506-Q1 RT pin variant can also be externally programmed to any desired switching frequency of operation. The rich feature set of the LMR36506-Q1 is designed to simplify implementation for a wide range of automotive end equipments.

filter

尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

引腳對引腳且具備與所比較裝置相同的功能

LMR36503-Q1

現行

針對尺寸和輕負載效率最佳化的汽車 3-V 至 65-V、0.3-A 降壓轉換器 Pin-to-pin 300-mA version

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 4

	類型	標題		日期
*	Data sheet	LMR36506-Q1 3-V to 65-V, 0.6-A Synchronous Buck Converter Optimized for Size and Light Load Efficiency datasheet (Rev. C)	PDF \| HTML	2020年 6月 19日
	Selection guide	Buck Converter Quick Reference Guide (Rev. B)		2021年 4月 8日
	Functional safety information	LMR3650x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	2020年 10月 26日
	EVM User's guide	LMR36506MSCEVM User’s Guide (Rev. A)		2020年 5月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMR36506EVM — 車用 3-V 至 65-V、0.6-A 超小型同步降壓轉換器評估模組

The LMR36506MSCEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36506-Q1 synchronous step-down converter. The LMR36503-Q1 can also be evaluated with LMR36506MSCEVM.

使用指南: PDF