LP5990

現行

具啟用功能的 200-mA、低 IQ、高準確度、超低壓降電壓穩壓器

產品詳細資料

Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.6 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.3, 1.8, 2.8, 3, 3.3, 3.6 Noise (µVrms) 60 Iq (typ) (mA) 0.03 Thermal resistance θJA (°C/W) 101 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable Accuracy (%) 2 PSRR at 100 KHz (dB) 33 Dropout voltage (Vdo) (typ) (mV) 160 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.2 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.6 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.3, 1.8, 2.8, 3, 3.3, 3.6 Noise (µVrms) 60 Iq (typ) (mA) 0.03 Thermal resistance θJA (°C/W) 101 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable Accuracy (%) 2 PSRR at 100 KHz (dB) 33 Dropout voltage (Vdo) (typ) (mV) 160 Operating temperature range (°C) -40 to 125
DSBGA (YFQ) 4 1 mm² 1 x 1

  • Operation from 2.2V to 5.5V input
  • ±1% accuracy over temp range
  • Output voltage from 0.8V to 3.6V in 50mV increments
  • 30 μA Quiescent current (enabled)
  • 10nA Quiescent current (disabled)
  • 160mV dropout at 200mA load
  • 60 μVRMSOutput voltage noise
  • 60 μs start-up time
  • 500μs shut-down time
  • PSRR 55 dB at 10 kHz
  • Stable with 0402 1.0µF ceramic capacitors
  • Logic controlled enable
  • Thermal–overload and short–circuit protection

  • Package

    4-Bump micro SMD,0.4mm pitch (lead free) 866 µm x 917 µm

  • Operation from 2.2V to 5.5V input
  • ±1% accuracy over temp range
  • Output voltage from 0.8V to 3.6V in 50mV increments
  • 30 μA Quiescent current (enabled)
  • 10nA Quiescent current (disabled)
  • 160mV dropout at 200mA load
  • 60 μVRMSOutput voltage noise
  • 60 μs start-up time
  • 500μs shut-down time
  • PSRR 55 dB at 10 kHz
  • Stable with 0402 1.0µF ceramic capacitors
  • Logic controlled enable
  • Thermal–overload and short–circuit protection

  • Package

    4-Bump micro SMD,0.4mm pitch (lead free) 866 µm x 917 µm

    The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.

    The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.

    When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually

    zero.

    Fast shut-down is achieved by the push pull architecture.

    The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives an overall solution size of < 2.5mm 2.

    Performance is specified for a -40°C to 125°C junction temperature range.

    The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.


    The LP5990 regulator is designed to meet the requirements of portable, battery-powered systems providing an accurate output voltage, low noise and low quiescent current.

    The LP5990 will provide a 1.8V output from a low input voltage of 2.2V and can provide 200mA to an external load.

    When switched into shutdown mode via a logic signal at the enable pin, the power consumption is reduced to virtually

    zero.

    Fast shut-down is achieved by the push pull architecture.

    The LP5990 is designed to be stable with space saving 0402 ceramic capacitors as small as 1µF, this gives an overall solution size of < 2.5mm 2.

    Performance is specified for a -40°C to 125°C junction temperature range.

    The device is available in micro SMD Package (0.4mm pitch) and is available with 1.2V,1.3V,1.8V,2.8V,3.0V,3.3V and 3.6V outputs.Lower voltage options down to 0.8V are available on request. For all other output voltage options please contact your local NSC sales office.


    下載 觀看有字幕稿的影片 影片

    技術文件

    star =TI 所選的此產品重要文件
    找不到結果。請清除您的搜尋條件,然後再試一次。
    檢視所有 2
    類型 標題 日期
    * Data sheet LP5990 Micropower 200mA CMOS Low Dropout Voltage Regulator datasheet (Rev. B) 2007年 12月 18日
    EVM User's guide AN-1584 LP5990 DSBGA Evaluation Board (Rev. A) 2013年 4月 30日

    設計與開發

    如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    DSBGA (YFQ) 4 Ultra Librarian

    訂購與品質

    內含資訊:
    • RoHS
    • REACH
    • 產品標記
    • 鉛塗層/球物料
    • MSL 等級/回焊峰值
    • MTBF/FIT 估算值
    • 材料內容
    • 認證摘要
    • 進行中持續性的可靠性監測
    內含資訊:
    • 晶圓廠位置
    • 組裝地點

    建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

    若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

    影片