首頁 放大器 運算放大器 (op amps) 一般用途運算放大器
首頁
放大器
運算放大器 (op amps)
一般用途運算放大器

OPA602

現行

高速精密 Difet® 運算放大器

立即訂購
產品規格表

OPA602

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail Out GBW (typ) (MHz) 6.5 Slew rate (typ) (V/µs) 35 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 3 Vn at 1 kHz (typ) (nV√Hz) 13 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 2 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 2.1 Output swing headroom (to positive supply) (typ) (V) -1.2
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail Out GBW (typ) (MHz) 6.5 Slew rate (typ) (V/µs) 35 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 3 Vn at 1 kHz (typ) (nV√Hz) 13 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 2 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 2.1 Output swing headroom (to positive supply) (typ) (V) -1.2
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • WIDE BANDWIDTH: 6.5MHz
  • HIGH SLEW RATE: 35V/us
  • LOW OFFSET: ±250 uV max
  • LOW BIAS CURRENT: ±1pA max
  • FAST SETTLING TIME:1 us to 0.01%
  • UNITY-GAIN STABLE
  • APPLICATIONS
    • PRECISION INSTRUMENTATION
    • OPTOELECTRONICS
    • SONAR, ULTRASOUND
    • PROFESSIONAL AUDIO EQUIPMENT
    • MEDICAL EQUIPMENT
    • DATA CONVERSION

Difet® Burr-Brown Corp.
  • WIDE BANDWIDTH: 6.5MHz
  • HIGH SLEW RATE: 35V/us
  • LOW OFFSET: ±250 uV max
  • LOW BIAS CURRENT: ±1pA max
  • FAST SETTLING TIME:1 us to 0.01%
  • UNITY-GAIN STABLE
  • APPLICATIONS
    • PRECISION INSTRUMENTATION
    • OPTOELECTRONICS
    • SONAR, ULTRASOUND
    • PROFESSIONAL AUDIO EQUIPMENT
    • MEDICAL EQUIPMENT
    • DATA CONVERSION

Difet® Burr-Brown Corp.

The OPA602 is a precision, wide bandwidth FET operational amplifier. Monolithic Difet (dielectrically isolated FET) construction provides an unusual combination of high-speed and accuracy.

Its wide-bandwidth design minimizes dynamic errors. High slew rate and fast settling time allow accurate signal processing in pulse and data conversion applications. Wide band-width and low distortion minimize AC errors. All specifications are rated with a 1k resistor in parallel with 500pF load. The OPA602 is unity-gain stable and easily drives capacitive loads up to 1500pF.

Laser-trimmed input circuitry provides offset voltage and drift performance normally associated with precision bipolar op amps. Difet construction achieves extremely low input bias currents (1pA max) without compromising input voltage noise.

The OPA602’s unique input cascode circuitry maintains low input bias current and precise input characteristics over its full input common-mode voltage range.

The OPA602 is a precision, wide bandwidth FET operational amplifier. Monolithic Difet (dielectrically isolated FET) construction provides an unusual combination of high-speed and accuracy.

Its wide-bandwidth design minimizes dynamic errors. High slew rate and fast settling time allow accurate signal processing in pulse and data conversion applications. Wide band-width and low distortion minimize AC errors. All specifications are rated with a 1k resistor in parallel with 500pF load. The OPA602 is unity-gain stable and easily drives capacitive loads up to 1500pF.

Laser-trimmed input circuitry provides offset voltage and drift performance normally associated with precision bipolar op amps. Difet construction achieves extremely low input bias currents (1pA max) without compromising input voltage noise.

The OPA602’s unique input cascode circuitry maintains low input bias current and precise input characteristics over its full input common-mode voltage range.
filter 尋找其它 一般用途運算放大器
下載

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
OPA145 現行 單路、5.5-MHz、高電壓轉換率、低雜訊、低功耗 RRO 精密 JFET 運算放大器 This product offers wider supply (4.5V-36V), higher DC precision (150µV maximum offset, 0.4µV/°C drift), lower power consumption (0.445mA), and lower noise.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet OPA602: High-Speed Precision Difet? Operational Amplifier datasheet (Rev. A) 2002年 9月 9日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​