TLV2365
- Gain bandwidth: 50 MHz
- Zerø-crossover distortion topology:
- CMRR: 115 dB (typical)
- Rail-to-rail input and output
- Input 100 mV beyond supply rail
- Noise: 4.5 nV/√Hz
- Slew rate: 27 V/µs
- Fast settling: 0.2 µs to 0.01%
- Precision:
- Offset drift: 2 µV/°C (maximum)
- Input bias current: 20 pA (maximum)
- Operating voltage: 2.2-V to 5.5-V
The TLV365 and TLV2365 devices ( TLVx365) are a family of zerø-crossover, rail-to-rail input and output, CMOS operational amplifiers, optimized for low voltage and cost-sensitive applications. Low-noise (4.5 nV/√Hz) and high-speed operation (50-MHz gain bandwidth) make these devices an excellent choice for driving sampling analog-to-digital converters (ADCs) in applications such as low-side current sensing, audio, signal conditioning, and sensor amplification.
Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swings to within 10 mV of the rails.
The TLVx365 are specified for operation from −40°C to +125°C.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TLVx365 50-MHz, Zerø-Crossover, High-CMRR, RRIO Operational Amplifiers datasheet (Rev. B) | PDF | HTML | 2023年 9月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DEM-OPA-SO-2A — 適用於 SO-8 封裝的二路運算放大器評估模組
The DEM-OPA-SO-2A demonstration evaluation module helps designers evaluate the operation and performance of TI dual-channel, high-speed, wideband operational amplifiers. This unpopulated printed-circuit board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.
For more (...)
ANALOG-ENGINEER-CALC — 類比工程師計算機
VOLT-DIVIDER-CALC — Voltage divider calculation tool
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點