TMS320C6416

• Highest-Performance Fixed-Point Digital Signal Processors (DSPs)
  • 2-, 1.67-, 1.39-ns Instruction Cycle Time
  • 500-, 600-, 720-MHz Clock Rate
  • Eight 32-Bit Instructions/Cycle
  • Twenty-Eight Operations/Cycle
  • 4000, 4800, 5760 MIPS
  • Fully Software-Compatible With C62x™
  • C6414/15/16 Devices Pin-Compatible
• VelociTI.2™ Extensions to VelociTI™ Advanced Very-Long-Instruction-Word (VLIW) TMS320C64x™ DSP Core
  • Eight Highly Independent Functional Units With VelociTI.2™ Extensions:
    • Six ALUs (32-/40-Bit), Each Supports Single 32-Bit, Dual 16-Bit, or Quad 8-Bit Arithmetic per Clock Cycle
    • Two Multipliers Support Four 16 x 16-Bit Multiplies (32-Bit Results) per Clock Cycle or Eight 8 x 8-Bit Multiplies (16-Bit Results) per Clock Cycle
  • Non-Aligned Load-Store Architecture
  • 64 32-Bit General-Purpose Registers
  • Instruction Packing Reduces Code Size
  • All Instructions Conditional
• Instruction Set Features
  • Byte-Addressable (8-/16-/32-/64-Bit Data)
  • 8-Bit Overflow Protection
  • Bit-Field Extract, Set, Clear
  • Normalization, Saturation, Bit-Counting
  • VelociTI.2™ Increased Orthogonality
• Viterbi Decoder Coprocessor (VCP) [C6416]
  • Supports Over 600 7.95-Kbps AMR
  • Programmable Code Parameters
• Turbo Decoder Coprocessor (TCP) [C6416]
  • Supports up to 7 2-Mbps or 43 384-Kbps 3GPP (6 Iterations)
  • Programmable Turbo Code and Decoding Parameters
• L1/L2 Memory Architecture
  • 128K-Bit (16K-Byte) L1P Program Cache (Direct Mapped)
  • 128K-Bit (16K-Byte) L1D Data Cache (2-Way Set-Associative)
  • 8M-Bit (1024K-Byte) L2 Unified Mapped RAM/Cache (Flexible Allocation)
• Two External Memory Interfaces (EMIFs)
  • One 64-Bit (EMIFA), One 16-Bit (EMIFB)
  • Glueless Interface to Asynchronous Memories (SRAM and EPROM) and Synchronous Memories (SDRAM, SBSRAM, ZBT SRAM, and FIFO)
  • 1280M-Byte Total Addressable External Memory Space
• Enhanced Direct-Memory-Access (EDMA) Controller (64 Independent Channels)
• Host-Port Interface (HPI)
  • User-Configurable Bus Width (32-/16-Bit)
• 32-Bit/33-MHz, 3.3-V PCI Master/Slave Interface Conforms to PCI Specification 2.2 [C6415/C6416 ]
  • Three PCI Bus Address Registers:
       Prefetchable Memory
       Non-Prefetchable Memory I/O
  • Four-Wire Serial EEPROM Interface
  • PCI Interrupt Request Under DSP Program Control
  • DSP Interrupt Via PCI I/O Cycle
• Three Multichannel Buffered Serial Ports
  • Direct Interface to T1/E1, MVIP, SCSA Framers
  • Up to 256 Channels Each
  • ST-Bus-Switching-, AC97-Compatible
  • Serial Peripheral Interface (SPI) Compatible (Motorola™)
• Three 32-Bit General-Purpose Timers
• Universal Test and Operations PHY Interface for ATM (UTOPIA) [C6415/C6416]
  • UTOPIA Level 2 Slave ATM Controller
  • 8-Bit Transmit and Receive Operations up to 50 MHz per Direction
  • User-Defined Cell Format up to 64 Bytes
• Sixteen General-Purpose I/O (GPIO) Pins
• Flexible PLL Clock Generator
• IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
• 532-Pin Ball Grid Array (BGA) Package (GLZ, ZLZ and CLZ Suffixes), 0.8-mm Ball Pitch
• 0.13-µm/6-Level Cu Metal Process (CMOS)
• 3.3-V I/Os, 1.2-V/1.25-V Internal (500 MHz)
• 3.3-V I/Os, 1.4-V Internal (600 and 720 MHz)

C62x, VelociTI.2, VelociTI, and TMS320C64x are trademarks of Texas Instruments.
Motorola is a trademark of Motorola, Inc.
IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
TMS320C6000, C64x, and C6000 are trademarks of Texas Instruments.
Windows is a registered trademark of the Microsoft Corporation.
Other trademarks are the property of their respective owners.
Throughout the remainder of this document, the TMS320C6414, TMS320C6415, and TMS320C6416 shall be referred to as TMS320C64x or C64x where generic, and where specific, their individual full device part numbers will be used or abbreviated as C6414, C6415, or C6416.
These C64xdevices have two EMIFs (64-bit EMIFA and 16-bit EMIFB). The prefix "A" in front of a signal name indicates it is an EMIFA signal whereas a prefix "B" in front of a signal name indicates it is an EMIFB signal. Throughout the rest of this document, in generic EMIF areas of discussion, the prefix "A" or "B" may be omitted from the signal name.