首頁 電源管理 電源開關 高壓側開關
首頁
電源管理
電源開關
高壓側開關

TPS27SA08

現行

具有電流感測功能的 36-V、8-mΩ、10-A、1 通道、工業高壓側開關

立即訂購
產品規格表

TPS27SA08

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Operating voltage (max) (V) 36 Operating voltage (min) (V) 8 Ron (typ) (mΩ) 9 Imax (A) 10 Current limit (min) (A) 20 Current limit (max) (A) 20 Current limit type Fixed TI functional safety category Functional Safety-Capable Current limit accuracy +25/-25% Current sense accuracy +5/-5% @ 0.78A FET Internal Features Current sense output, Current sense/monitor, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Catalog
Number of channels 1 Operating voltage (max) (V) 36 Operating voltage (min) (V) 8 Ron (typ) (mΩ) 9 Imax (A) 10 Current limit (min) (A) 20 Current limit (max) (A) 20 Current limit type Fixed TI functional safety category Functional Safety-Capable Current limit accuracy +25/-25% Current sense accuracy +5/-5% @ 0.78A FET Internal Features Current sense output, Current sense/monitor, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Catalog
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • Single-channel smart high-side switch with a typical 9-mΩ RON (TJ = 25°C)
  • Improve reliability through overcurrent protection:
    • Current limit threshold nominally at 20 A
    • Current limiting (clamping) on reaching the threshold
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short to ground and supply
    • Automatic FET switch-on during reverse supply
    • Automatic shut off if loss of supply and ground occurs
    • Integrated output clamp to demagnetize inductive loads
    • Configurable fault handling
  • Analog sense output can be configured to accurately measure:
    • Load current
    • Supply voltage
    • Device temperature
  • Provides FLT indication back to MCU
    • Detection of open load in off-state and short-to-GND
  • Single-channel smart high-side switch with a typical 9-mΩ RON (TJ = 25°C)
  • Improve reliability through overcurrent protection:
    • Current limit threshold nominally at 20 A
    • Current limiting (clamping) on reaching the threshold
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short to ground and supply
    • Automatic FET switch-on during reverse supply
    • Automatic shut off if loss of supply and ground occurs
    • Integrated output clamp to demagnetize inductive loads
    • Configurable fault handling
  • Analog sense output can be configured to accurately measure:
    • Load current
    • Supply voltage
    • Device temperature
  • Provides FLT indication back to MCU
    • Detection of open load in off-state and short-to-GND

The TPS27SA08 device is a single-channel smart high-side switch intended for use with 24-V supply systems. The device integrates robust protection and diagnostic features to ensure output port protection even during harmful events like short circuits. The device protects against faults through a reliable current limit, which, depending on device variant, can be configured to react to an overcurrent event by either instantly turning the switch off or by regulating the output current at the set point (nominally 20 A). The TPS27SA08 device also provides a high accuracy analog current sense that allows for improved diagnostics when driving varied load profiles. By reporting load current, device temperature, and supply voltage to a system MCU, the device enables predictive maintenance and load diagnostics that lengthen the system lifetime.

The TPS27SA08 device is available in a small 16-pin HTSSOP package which allows for reduced PCB footprint.

The TPS27SA08 device is a single-channel smart high-side switch intended for use with 24-V supply systems. The device integrates robust protection and diagnostic features to ensure output port protection even during harmful events like short circuits. The device protects against faults through a reliable current limit, which, depending on device variant, can be configured to react to an overcurrent event by either instantly turning the switch off or by regulating the output current at the set point (nominally 20 A). The TPS27SA08 device also provides a high accuracy analog current sense that allows for improved diagnostics when driving varied load profiles. By reporting load current, device temperature, and supply voltage to a system MCU, the device enables predictive maintenance and load diagnostics that lengthen the system lifetime.

The TPS27SA08 device is available in a small 16-pin HTSSOP package which allows for reduced PCB footprint.
filter 尋找其它 高壓側開關
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
TPS1HA08-Q1 現行 具可選電流限制的 40-V、8-mΩ、單通道汽車智慧型高壓側開關 Automotive 8-mohm high-side switch

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS27SA08 36-V, 10-A, Single-Channel Smart High Side Switch datasheet PDF | HTML 2020年 11月 4日
Application brief Faster Switching of Large Inductive Loads in Digital Output Modules PDF | HTML 2022年 7月 15日
Technical article Bulk up your 24-VDC power distribution with industrial high-side switches PDF | HTML 2021年 5月 4日
User guide High Side Switch Motherboard Evaluation Module (Rev. B) PDF | HTML 2020年 10月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HSS-MOTHERBOARDEVM — 高壓側開關主機板

The HSS-MOTHERBOARDEVM evaluation module is designed to evaluate the <50mΩ Ron devices in TI's high side switch portfolio. These devices include TPS1HA08-Q1, TPS2HB08-Q1, TPS2HB16-Q1, TPS2HB35-Q1, and TPS2HB50-Q1. This board does not come populated with the devices, but allows any of the (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS27SA08C PSpice Transient Model

SLVMDF5.ZIP (127 KB) - PSpice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片